K&K Systems RPM 18 Manuel utilisateur

RPM SERIES RADARS


3
Thank You .............................................................................................................4
Warranty................................................................................................................5
Introduction ........................................................................................................6
Safety, Warnings, and Precautions ...........................................................7
Mounting Assembly....................................................................................8-9
Description of Components.................................................................... 10
Threshold and Blanking Settings.......................................................... 11
Wiring Diagram............................................................................................... 12
Parts List.............................................................................................................. 13
Troubleshooting.......................................................................................14-15
TABLE OF CONTENTS

4
THANK YOU FOR YOUR BUSINESS!
To Our Valued Customer,
K&K Systems, Inc. is excited that you have purchased our product.
Our company has been serving the trac industry since 1997. Since that
time we have risen to become a leader in the trac industry. We oer a
complete line of trac safety products that include message boards, arrow
boards, radar speed monitors, solar school zone ashers, solar 24-hour
ashers and many other quality products that serve our industry today.
At K&K Systems, Inc., we strive to improve the quality of our products. We
are dedicated to the concept that our customers are our most valuable
resource. We strive to serve our customers as we would want to be served.
Tim Keith,
President

5
1. The manufacturer warrants that all products manufactured by K&K Systems, Inc. will be
free from defects in material and workmanship for a period of one (1) year from date of
shipment, subject to the conditions and restrictions contained herein.
2. This warranty does not apply to a product that has not been installed or maintained in
accordance with the manufacturer’s instructions, has been subjected to damage in an
accident, abused or neglected during operation, repaired or modied by persons other
than manufacturer, its employees or authorized agents, or failed to have normal mainte-
nance.
3. The buyer expressly agrees that the buyer’s sole remedy and the manufacturer’s sole re-
sponsibility, in respect to a warranty claim, is exclusively limited to repair or replacement
at the manufacturer’s option, of product or a portion thereof found by the manufacturer
to be defective. The manufacturer is not responsible for labor or other expended charges
by buyer including transportation chargers, and shall not be liable for any incidental or
consequential damages connected with repair of a product deemed to be defective or
with installation or replacement of repaired product. Further, the manufacturer disclaims
any liability for any incidental or consequential damages, including lost or duplicated
time or expense accruing for any reason, to the owner or user or any products sold by
the manufacturer, whether claim is made in contract or in tor or under any theory of
warranty, negligence or otherwise.
4. The manufacturer reserves the right to make changes in its products from time to time,
without incurring any obligation to incorporate such improvements in any products
previously sold or in service.
5. The terms and conditions of the warranty cannot be altered without the written consent
of the manufacturer.
6. The foregoing warranty is exclusive and in lieu of all other express, statutory and implied
warranties INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR ANY
PARTICULAR PURPOSE. There are no warranties which extend beyond the language in
the previous six (6) paragraphs.
If you have any further questions, please feel free to call us at our
toll-free number, 888-414-3003, email info@k-ksystems.com or
look us upon the internet at www.k-ksystems.com.
MANUFACTURER’S WARRANTY

6
INTRODUCTION
RADAR DISPLAY
K&K Systems’Radar Displays are designed to keep both pedestrians and vehicular
trac safe by reminding motorists of their speed. By using a violation alert ashing
display, the driver’s attention is drawn to the radar display. Radar displays have
been proven to slow motorist down 5 to 10 MPH.
Our 100,000 rated LED lighting unit displays (2)18”amber digits. Our boards
detect speeds from 5-99 MPH. KPH board is available. We install the display in an
aluminum housing that has been powder coat painted white to prevent glare and
rust.
The Radar unit is solar powered with a charge controller and battery power
backup. Optional trac statistics feedback is available.
BATTERY BOX
The control box is steel fabricated with lockable rotary latches and hinged at the top to
protect the batteries and the controller. Mounting hardware for lower heights for easier
access is available.
DISPLAY HOUSING
The display housing is framed in extruded aluminum and has a polycarbonate plastic that
provides U.V. protection along with glare resistance. The message board uses LED (light
emitting diodes) to produce numbers.
POWER SOURCE
Our products incorporate a battery pack wired for 12V operation, depending on the
requirements of the design. The battery bank is regulated by and protected by a solid-state
charge controller/low voltage disconnect. This prevents gassing and over discharging of
the batteries, which can result in premature failure. A thermal compensation and related
circuitry adjusts the charge rate of the system with variances in temperature.

7
SAFETY, WARNINGS,
PRECAUTIONS
The following are the manufacturer’s recommendations for the safe and responsible use
of your K&K Systems vehicle mounted units.
• Periodically inspect the unit. This includes but is not limited to the wiring, housing, and the
Lexan face.
• Periodically check all nuts, bolts, cable clamps, etc. and tighten, repair, or replace when and
where necessary.
Please remember that the best assurance against accidents is a careful and responsible operator.
BATTERY SAFETY (optional)
It is important that you know that, while 12V DC is not likely to cause electrical shock,
these batteries can produce unbelievable amounts of current that can instantly melt large
tools, burn wires, and heat jewelry to skin searing temperatures. You should become
familiar with how batteries operate so that you will know how to avoid the dangerous
characteristics of a battery.
BATTERY CHARGER SAFETY (optional)
If optional battery charger is installed the battery charger is preset in automatic position.
DO NOT CHANGE THESE SETTINGS because of possible overcharging of batteries. Plug cord
into a standard 120V AC for charging.
SOLAR SAFETY
To reduce the risk of shock or burn during maintenance, solar panels should be covered
with an opaque material and power converter/battery charger should be disconnected
from AC power supply.
LONG-TERM STORAGE
When the sign is to be stored for extended periods of time, the POWER switch should be
turned o, and the solar charge controller should be left on, allowing the solar panel array
to continuously charge the sign battery bank. If possible, place the unit in a sunny area to
allow the unit to maintain the charge on the batteries. When the sign is to begin operation
again, a thorough inspection of all systems is advised before the sign is returned to service.
Check battery state of charge to conrm over 12V.

8
MM
ITEM
Description
QTY.
PROPRIETARY AND CONFIDENTIAL
A
DRAWN
CHECKED
NAME
DATE
MM
ITEM
Description
QTY.
PROPRIETARY AND CONFIDENTIAL
A
DRAWN
CHECKED
NAME
DATE
MOUNTING ASSEMBLY

9
MM
ITEM
Description
QTY.
PROPRIETARY AND CONFIDENTIAL
A
DRAWN
CHECKED
NAME
DATE
MM
ITEM
Description
QTY.
PROPRIETARY AND CONFIDENTIAL
A
DRAWN
CHECKED
NAME
DATE

10
DESCRIPTION OF
RADAR COMPONENTS
Quick Selection Violation Alert
Switches Thumbwheels change the
Over Speed Violator Alert speed
setting and Blanking Violator Alert.
Push the buttons to desired speed
threshold.
6005 Radar
Controller
Radar
LED Panels
Control Panel
Batteries
Bluetooth
Connection
(optional)
Terminal
Block
Bluetooth
Terminal
Block
Load Light ON when
radar is powered ON
Charge Light
is ON when solar is
charging
Battery
Status Lights 2-3
lights illuminated for
proper function
Solar Controller
ON/OFF Switch
Stats Port to
download trac
statistics (Optional)
Autres manuels pour RPM 18
1
Table des matières
Autres manuels K&K Systems Moniteur


















