Kamoer F4 PRO Manuel utilisateur

F4 PRO

Dosing Pump

Quick Start Guide

A4 2022/06/18

Kamoer Fluid Tech (Shanghai) Co., Ltd.

www.kamoer.com

FCC warning

This device has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This device generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this device does cause harmful interference to radio or television reception, which can be

determined by turning the device off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the device and receiver.

--Connect the device into an outlet on a circuit different from that to which the receiver is

connected.

--Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment

FCC Radiation Exposure Statement The antennas used for this transmitter must be installed to

provide a separation distance of at least 20 cm from all persons and must

not be co-located for operating in conjunction with any other antenna or transmitter.

Warranty service

1. Warranty Conditions

The warranty service is only valid for users who have correctly installed, used and maintained

in accordance with the manual, and all man-made faults or damages are not covered by the

warranty. Please keep the proof of purchase in a safe place so that you can obtain satisfactory

after-sales service in a timely manner.

2. Warranty coverage

Within one year from the date of purchase, if there is any damage caused by the manufacturing

process or components, the company will provide free warranty service. The free maintenance

service provided during the warranty period includes free repair, free replacement of faulty

spare parts, and replacement of products that cannot be repaired with products of the same

model. Free service does not include shipping costs incurred for product repairs.

3. Non-warranty coverage

The following factors are not covered by the free warranty, and customer repairs are subject to

fees.

1) Product appearance (please confirm when purchasing);

2) Improper use, maintenance, or storage (please use, maintain and store correctly according

to the user manual);

3) Access to inappropriate power supply;

4) Damage to the components caused by the short circuit of the circuit board caused by the

entry of various insects into the machine;

5) Losses caused by accidents;

6) Use inappropriate spare parts (non-company spare parts are not applicable);

7) Persons not authorized by the company negligently handle, modify or repair (please do not

dismantle or repair without authorization);

8) Failure or damage caused by use outside the applicable occasion;

9) Damage caused by force majeure, etc.;

10) Consumable and wearing parts (pump tube, connector, connecting tube, etc.);

11) The warranty period has expired.

Know F4 PRO

F4 PRO is the first stand-alone remote 4-channel dosing pump of Kamoer. It is mainly used to

quantitatively add aquarium additives, such as Ca, Mg and KH supplements. It easily maintains

water quality and greatly reduces the user workload.

F4 PRO uses plastic gear to directly drive the pump head for increasing accuracy/precision, no

slip and rust. Each channel is distinguished by one color housing, corresponding to the

connecting tube of 4 colors, which are easy to distinguish and very fashionable. Highly reliable

threaded joints are used to ensure no leakage problem. Standard long-life pump tubing.

Support both iOS and Android devices control by app.

Download app

1. Scan the QR code on packing box or below, download the app of the icon below.

2. Apple users enter the App Store, Android users enter the Google Play, search for

"Kamoer Remote" and find the corresponding icon app download.

Note: This app supports iOS 9.1 and above versions of Apple devices, Android 4.4 and

above versions of Android devices.

Open the App, scan the QR code of the device or manually select the region where the device is

located, register via mobile phone or email, and follow the App prompts to complete the

account registration.

Note: Region selection is very important. Wrong region selection will result in failure to

configure the network. It is recommended to scan the QR code of the device to select the

region.

View tutorial

On the device list page, click the "?" icon in the upper right corner to enter the "Tutorial" page,

and select "F4 PRO" to view the tutorial. The tutorial includes the user manual and frequently

asked questions.

Indicator light

Indicator Status Description

Status Indicator

(Red)

On F4 PRO has connected to the cloud

Off Disconnected from router

Flash fast and continuously

Configure network by router. When the

router turns on AP isolation, this mode

cannot be used, and you need to switch

to AP network configuration mode

Slowly flashing (on for 0.2

seconds and off for 2 seconds) Configure network by AP

Slowly flashing (on for 2

seconds and off for 2 seconds) F4 PRO has disconnected from the cloud

Power Indicator

(Green)

On Powered on

Off No power supply or power failure

Note: Devices of version 1.1.05 and above support AP network configuration. For devices

below version 1.1.05, please upgrade the firmware to the latest version.

Connect F4 PRO to the cloud

Power on F4 PRO for the first time after unpacking, the status indicator (red) flashes slowly. At

this time, you need to use the App to connect the dosing pump to the cloud through the

wireless router. The specific steps are as follows:

1. Ensure that the wireless router has connected to the Internet. The mobile phone is

connected to the 2.4G Wi-Fi hotspot of the wireless router (the device does not support

5G Wi-Fi, and 5G Wi-Fi hotspots cannot be used)

2. Open the Kamoer Remote App, log in with the registered account, click the "+" icon in

the upper right corner, select "Add Device", select "F4 PRO Dosing Pump" in the list of

supported devices to add.

3. After entering the router Wi-Fi password, click the "Next" button, press and hold the

Reset button on the right side of the device for more than 6 seconds and then release it,

click the "Next" button, and wait for the red status indicator to flash;

4. If the indicator light continues to flash rapidly (configure network by router), select the

"The red light is flashing fast and continuously" icon on the App interface, click the

"Next" button, and wait for the network configuration to be completed.

5. If the indicator is flashing slowly at a frequency of on for 0.2 seconds and off for 2

seconds (configure network by AP), select the "The red light is flashing slowly and

intermittently" icon on the App interface, click the "Next" button, and complete the

network configuration according to the interface prompts.

6. After the connection is successful, the App will prompt that the connection is successful.

At this time, the status indicator (red) is on, indicating that dosing pump has been

connected to the cloud, and the user has also completed the binding with dosing pump.

Bind F4 PRO

There are two ways for the user to bind the dosing pump. The first way is to bind the dosing

pump through the method above; the second way is that the dosing pump has been connected

to the cloud through the wireless router, and the mobile phone can be connected to the

wireless under the router, the app will display the locally available dosing pump. The user can

directly click the corresponding "Bind" button on the right side to bind the dosing pump in the

list of scanned dosing pumps.

Unbind F4 PRO

Long press the corresponding device icon on the device list page, the "Remove" icon will pop

up at the bottom, and click the "Remove" icon to unbind.

Notes

Please use the product's own power adapter and work in the specified working

environment.

This product only supports 2.4G Wi-Fi and does not support 5G Wi-Fi.

The dosing pump should be placed in a reasonable position to ensure that the height

difference between the inlet and the outlet is within 0.5 m.

The connection pipe for liquid inlet should be as short as possible, and the outlet

connection pipe should be suspended above the container.

Please check carefully that the inlet and outlet connections are in the correct direction.

Technical parameters

Dimensions(L*W*H) 250*59*49 mm

Weight 950g (without power adapter)

Power adapter Input: see the power adapter label for details

Output: DC12V 2A

Dosing parameters

Dosing channel: 4 KFS pump heads

Flow rate: >45 ml/min

Number of dosing: 24 times / day - 1 time / 99 days

Dosing volume accuracy: <±0.5%

Manual does amount: 1 ml - 9999 ml

Interface WIFI and CAN communication interface

Working environment Temperature 0 - 70 ° C,

humidity 10% - 90% (non-condensing)

Storage environment Temperature -20 ° C - 85 ° C,

humidity 10% - 90% (non-condensing)

Autres manuels pour F4 PRO

Table des matières

Autres manuels Kamoer Pompe à eau

Kamoer

Kamoer DIPump550 Manuel utilisateur

Kamoer

Kamoer KSP-F01A-DC Manuel utilisateur

Kamoer

Kamoer X1 PRO 2 Manuel utilisateur

Kamoer

Kamoer X1 MICROPUMP Manuel utilisateur

Kamoer

Kamoer KSP-F01A Manuel utilisateur

Kamoer

Kamoer X1 PRO 2 Manuel utilisateur

Kamoer

Kamoer X1PROT2 Manuel utilisateur

Kamoer

Kamoer UIP CK15 Manuel utilisateur

Kamoer

Kamoer FX-STP Manuel utilisateur

Kamoer

Kamoer F4 Manuel utilisateur

Kamoer

Kamoer X2SR Manuel utilisateur

Kamoer

Kamoer KXP100 Manuel utilisateur

Kamoer

Kamoer X1 PRO T Manuel utilisateur

Kamoer

Kamoer LLS Plus Manuel utilisateur

Kamoer

Kamoer X1 Manuel utilisateur

Kamoer

Kamoer ATO One 2 Manuel utilisateur

Kamoer

Kamoer LLS Plus Manuel utilisateur

Kamoer

Kamoer X1 Manuel utilisateur

Kamoer

Kamoer AIP WIFI Manuel utilisateur

Kamoer

Kamoer F4 PRO Manuel utilisateur

Kamoer

Kamoer X1 Manuel utilisateur

Kamoer

Kamoer F1 Manuel utilisateur

Kamoer

Kamoer ATO One for RO Manuel utilisateur

Kamoer

Kamoer DIPump-KK300 V2 Manuel utilisateur

Manuels Pompe à eau populaires d'autres marques

Neptun

Neptun NPHW 5500 Manuel utilisateur

Sensidyne

Sensidyne Gilian BDX-II Instructions d'installation et d'utilisation

Draper

Draper 47808 Manuel utilisateur

Trolla

Trolla 12820 Manuel utilisateur

Sunfab

Sunfab SVH Series Manuel utilisateur

WilTec

WilTec 50740 Manuel utilisateur

Fieldmann

Fieldmann FVC 5015 EK Manuel utilisateur

Everbilt

Everbilt EFSUB5-122HD Manuel utilisateur

Graco

Graco Husky 3300e Manuel utilisateur

esotec

esotec 101018 Manuel utilisateur

moyno

moyno 2000 CC Manuel utilisateur

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuel utilisateur

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guide de dépannage

DUROMAX

DUROMAX XP WX Series Manuel utilisateur

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuel utilisateur

Franklin Electric

Franklin Electric IPS Manuel utilisateur

Xylem

Xylem e-1532 Series Manuel utilisateur

Milton Roy

Milton Roy PRIMEROYAL Manuel utilisateur