Küppersbusch EKWI 3740.O W Manuel utilisateur

MONTAGEANWEISUNGEN

Installation instructions

Manuel d’installation

Montagehandleiding

EKWI 3740.O W / S

SUMMARY

DESCRIPTION OF THE APPLIANCE.......................................................................................11

APPLIANCES AND INSTALLATION DIMENSIONS...............................................................................11

MULTIZONES INSTALLATION ................................................................................................12

INSTALLATION...........................................................................................................................12

VENTILATION ............................................................................................................................12

INSTALLATION INSTRUCTIONS.....................................................................................................13

CONNEXION OF THE DIFFERENT ELEMENTS......................................................................13

CONNECTION OF COOKING ZONES ..............................................................................................13

CONFIGURATION PROCEDURE.............................................................................................15

WHAT TO DO IN CASE OF A PROBLEM................................................................................15

ELECTRICAL CONNECTION...................................................................................................16

DESCRIPTION OF THE APPLIANCE

Appliances and installation dimensions

Dimension

Heating zone Finger touch

Reference 703879-02 703879-03 703879-01

703880-01

Dimension of

glass A 320mm 320mm

Diameter of the

throat B 326mm 326mm

Thickness of

glass 4mm 4mm

Cut-out Dimen-

sion C 302mm 180 x 113 mm

Height total 57mm 35mm

Diameter of the

inductor 160mm 200mm

Power 1100W 2300W

Booster 2500W 3000W

Dimensions of the technical box 703879-04 : 260x211x48

MULTIZONES INSTALLATION

Installation

Unpack all the material.

The installation and connection of the appliance have to be done by approved

specialists. The manufacturer can not be held responsible for damage caused by

building-in or connecting errors.

The appliancemust be well-equipped and installed in a kitchen unit and an adapted and

approved work surface.

This domestic appliance is exclusively for the cooking of food, to the exclusion of any

other domestic, commercial or industrial use.

Remove all labels and self-adhesives from the ceramic glass.

Do not transform or modify the appliance.

The cooking zones and the control panel should not be used as support or worktop.

The appliance must be grounded and connected conform to local standards.

Do not use any extension cable to connect it.

The appliance can not be used above a dishwasher or a tumble-dryer: steam may

damage the electronic appliances.

Ventilation

Important: the cooling system needs some airflow.

Take into account to keep the gap in front of the air inlet of the cooling fan

Installation instructions

The installation comes under the exclusive responsibility of specialists.

The installer is held to respect the legislation and the standards used in his home country.

Fitting - installing:

The piece of furniture or the support in which the hob has to be fitted, as well as the

edges of furniture, the laminate coatings and the glue used to fix them, must be able to

resist temperatures of up to 100 °C.

The mural rods of edge must be heat-resisting.

The hobs are classified as “Y” class for heat protection. Ideally the hob should be

installed with plenty of space on either side. There may be a wall at the rear and tall units

or a wall at one side. On the other side, however, no unit or divider must stand

higher than the hob.

Ensure that there is a distance of 50 mm between the hob and the wall or sides.

Materials which are often used to make worktops expand on contact with water. To

protect the cut out edge, apply a coat of varnish or special sealant. Particular care must

be given to applying the adhesive joint supplied with the hob to prevent any leakage into

the supporting furniture. This gasket guaranties a correct seal when used in conjunction

with smooth work top surfaces.

The safety gap between the hob and the cooker hood placed above must respect the

indications of the hood manufacturer. In case of absence of instructions respect a

distance minimum of 760 mm.

The connection cords should be subjected, after building in, with no mechanical

constraint, such as for example the drawer.

CONNEXION OF THE DIFFERENT ELEMENTS

The installation of this appliance and the connection to the electrical network should be made by

an electrician perfectly aware, and in respect of the normative regulations

Connection of cooking zones

Each connector of the cooking zones, is located by a sticker with the classification from

5 to 8 corresponds to:

5: Heating zone 1100 W

7: Heating zone 2300 W

The fingertouch electronic is located by “C” on the connector

On the technical box, near the female connectors are written: 5-6-7-8-C.

Connect the fingertouch on the “C” of the technical box.

Connect the heating zones with the corresponding number on the technical

box.

To connect easily, begging with the biggest number of the heating zone.

Example:

Nota: - It is strictly forbidden to lengthen or shorten the wire of the cooking zones.

- We do not take any responsibility in cas of not respecting the connections

indicated and the safety warnings.

CONFIGURATION PROCEDURE

The table must be configured. Please implement the following steps:

I) Important!Before you start, make sure there is no more pot on the hob

II) Disconnect the appliance from the grid by removing the fuse or turning the circuit breaker off

III) Reconnect the table to the grid

IV) Procedure:

* Take a pot with a ferromagnetic bottom with a minimum diameter of 16 cm

* start the procedure within 2 minutes after reconnecting the hob to the grid

* don’t use the [ O/I ] touch

V) First step: cancel the existing configuration

1) Press the touch n°2 and hold down

2) The symbol [ - ] will appear on each display

3) With your other hand, press successively and

quickly (less than 2s) on each [ - ] display.

Begin from the front right side and turn contrary

clockwise, as described on the picture (a -> b -> c -> d)).

A double "beep" means an error occurred. If so, start again from item 1).

4) Remove your fingers from the touch control, then push again on touch 1 during few

seconds, until blinking [ E ] symbols appear.

5) Wait until [ E ] symbols stop blinking.

6) After few seconds, [ E ] are automatically transformed in [ C ].

The existing setup has been cancelled.

VI) Second step: new setup

Take a pot with a ferromagnetic bottom with a minimum diameter of 16 cm2) Select

a cooking zone by pushing on the corresponding [ C ] display

3) Place the pot on the area to be set

4) Wait until the [ C ] display becomes a [ - ]. The selected cooking zone is now

configured.

5) Follow the same procedure for each cooking zone with a [ C ] display.

6) All the cooking zones are configured once all the displays are turned off.

Note: …..Please use the same pot for the whole procedure.

Never put several pots together on the zones during the setup-process.

WHAT TO DO IN CASE OF A PROBLEM

The symbol [ E4] appears :

Reconfigure the table

If the symbol remains, please contact the After sales service

ELECTRICAL CONNECTION

The installation of this appliance and the connection to the electrical network should be

entrusted only to an electrician perfectly aware, and in respect of the normative

regulations

Protection against parts under tension must be ensured after the building.

The data of connection necessary are on the stickers place on the hob casing near the

connection box.

The connection to the main must be made using an earthed plug or via an omnipolar

circuit breaking device with a contact opening of at least 3 mm.

The electrical circuit must be separated from the network by adapted devices, for

example: circuit breakers, fuses or contactors.

If the appliance is not fitted with an accessible plug, disconnecting means must be

incorporated in the fixed installation, in accordance with the installation regulations.

The inlet hose must be positioned so that it does not touch any of the hot parts of the hob

or oven.

CONNECTION OF THE HOB

For the various kinds of connection, use the brass bridges which are in the box next the

terminal.

Caution!

- Connect always the earth wire.

- Respect the connection diagram.

- This device is intended for a supply of 230 V ~ 50/60 Hz

- The connection box is located underneath at the back of the hob casing. To open the cover

use a medium screwdriver. Place it in the slits and open the cover.

( * ) calculated with the simultaneous factor following standard EN 60 335-2-6/1990

Important

It is forbidden to extent or to shorten the liaison wires areas of the cooking zones ( 5,6,7,8; see

page 6)Only the control panel (C) may be extended (Order our only lengthens ref A10506/0).

Monophase 230V~1P+N:

Put the 1st bridge between terminal 1 and 2, the 2nd between 3 and 4.

Attach the earth to the terminate “earth”, the neutral N to terminal 3 or 4, the Phase L to one of

the terminals 1 or 2.

Biphase 400V~2P+N:

Put a bridge between terminal 3 and 4.

Attach the earth to the terminate “earth”, the neutral N to terminal 3 or 4, the Phase L1 to the

terminals 1 and the Phase L2 to the terminal 2.

Caution! Be careful that the cables are correctly engaged and tightened.

We cannot be held responsible for any incident resulting from incorrect connection or

which could arise from the use of an appliance which has not been earthed or has been

equipped with a faulty earth connection.

Mains Connection Cable diameter

Cable Protection calibre

230V~ 50/60Hz 1 Phase + N 3 x 2.5 mm² H 05 VV - F

H 05 RR - F 25 A *

400V~ 50/60Hz 2 Phases + N 4 x 1.5 mm² H 05 VV - F

H 05 RR - F 16 A *

Table des matières

Autres manuels Küppersbusch Plaque

Küppersbusch

Küppersbusch EWIF 457.1 Guide de configuration rapide

Küppersbusch

Küppersbusch EKE 60.0 Guide de configuration rapide

Küppersbusch

Küppersbusch GKST 58 Manuel utilisateur

Küppersbusch

Küppersbusch EKI 9730.0-35F Guide de configuration rapide

Küppersbusch

Küppersbusch EKEF8752.1 Manuel d'utilisation

Küppersbusch

Küppersbusch Built-in glass ceramic Manuel utilisateur

Küppersbusch

Küppersbusch Built-in glass ceramic induction Manuel utilisateur

Küppersbusch

Küppersbusch GKS 3920.0 Manuel utilisateur

Küppersbusch

Küppersbusch EKI9652.1F Manuel d'utilisation

Küppersbusch

Küppersbusch EKI 6940 Guide de configuration rapide

Küppersbusch

Küppersbusch EKIW 9850.0F Guide de configuration rapide

Küppersbusch

Küppersbusch EWI 457.1 Guide de configuration rapide

Küppersbusch

Küppersbusch Glass ceramic Manuel utilisateur

Küppersbusch

Küppersbusch EKI 6840.0F Guide de configuration rapide

Küppersbusch

Küppersbusch KC 906.2 Manuel utilisateur

Küppersbusch

Küppersbusch MKI 3820.0M Guide de configuration rapide

Küppersbusch

Küppersbusch EMG 457.0 Guide de configuration rapide

Küppersbusch

Küppersbusch EKI8340.1F Manuel d'utilisation

Küppersbusch

Küppersbusch EKI 307.1 Guide de configuration rapide

Küppersbusch

Küppersbusch EKWE Manuel utilisateur

Küppersbusch

Küppersbusch EKI 957.1 Guide de configuration rapide

Küppersbusch

Küppersbusch EKWI 3740.O S Manuel utilisateur

Küppersbusch

Küppersbusch EKI 60.0 Guide de configuration rapide

Küppersbusch

Küppersbusch Glass ceramic induction Guide de configuration rapide

Manuels Plaque populaires d'autres marques

Siemens

Siemens EX875KYV1E Fiche technique

AEG

AEG CERAMIC HOB 6010 K Manuel utilisateur

VALERA

VALERA CT 70A Manuel utilisateur

Zanussi

Zanussi ZGF 6420 Manuel utilisateur

Gaggenau

Gaggenau CI 273 Manuel utilisateur

G3 Ferrari

G3 Ferrari Energy Manuel utilisateur

Pkm

Pkm IN4B Manuel utilisateur

Award

Award H903BG Manuel utilisateur

Zanussi

Zanussi VCH 5005 RZ Manuel utilisateur

Miele

Miele KM 523 Manuel utilisateur

Hotpoint

Hotpoint IS67V8CCXT/E Manuel utilisateur

AEG

AEG HK854870XB Manuel utilisateur

Cookology

Cookology SEP600BK Manuel utilisateur

Bauknecht

Bauknecht Hob Manuel utilisateur

Zanussi

Zanussi ZGM 782 Manuel utilisateur

dipo INDUCTION

dipo INDUCTION DIBK218S Manuel utilisateur

Miele

Miele KM 5987 Manuel utilisateur

Miele

Miele KM 360 G Manuel utilisateur