1 Read all instructions carefully before
using the appliance.
2 This appliance is intended for household
use only. It is not suitable for commercial
use such as kitchen areas and other
working environments.
3 Ensure that the appliance and mains
cable are always placed on a firm and flat
surface, away from the any edges of the
worktop and out of reach from children.
4 Do not place the appliance onto a metal
tray or metal surface whilst in use.
5 Do not place the appliance on, or near,
hot gas or an electric burner or in a
heated oven.
6 Do not operate the appliance with wet
hands or bare feet.
7 Keep the appliance and mains cable away
from the edges of worktops and out of
reach of children. Route the mains cable
so it does not overhang, and cannot be
tripped over or caught.
8 Do not let the mains cable run across an
open space, such as, between a low power
socket and a table or across any hot area,
such as a cooker, as the heat may damage it.
9 The connections on both sides of the mains
cable (the appliance and plug) should never
be strained. If the mains cable is damaged,
it must be replaced by a qualified person or
service, to avoid any hazards.
10 Do not use this appliance in a bathroom,
near water, or outdoors. Do not immerse
any of the parts (appliance, mains cable,
plug) in water or other liquids - this is to
protect against fire, electric shock and
personal injury.
11 Do not use this appliance if it is damaged
or is malfunctioning. Do not leave the
appliance unattended whilst in use.
12 Use and store this appliance out of reach
from children.
IMPORTANT SAFEGUARDS
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING
THE FOLLOWING:
13 This appliance must not be operated by an
external timer or a remote control system.
14 SQ Professional Ltd will not be held liable
for eventual damages to persons, animals
or objects caused by incorrect installation
or deriving from negligence, improper,
erroneous or unreasonable use.
15 The top of the motor unit yshould always
be kept dry. Before cleaning and drying,
disconnect the mains cable from the
power socket. Ensure that the motor unit
yis completely dry before you reconnect
the appliance to the power supply.
16 To reduce the risk of injury, ensure that
blades are correctly attached. Always
handle the blades carefully, as they are
extremely sharp.
17 Ensure the blending jug , mixing bowl f,
grinding mill and any attachments are
securely in place before operating the
appliance.
18 Always close the blending jug lid and
have the mixing bowl cover d, citrus juicer
or grinding mill securely locked in
place before you switch the appliance on.
19 Do not open the blending jug lid or the
mixing bowl cover dand do not try to
remove the citrus juicer or grinding mill
whilst the appliance is running.
20 Never switch the appliance on when
it is empty. Always ensure there is at
least the minimum amount of liquid or
solid ingredients in the blending jug ,
mixing bowl f or grinding mill when
operating the appliance.
21 This appliance incorporates a protective
device against high temperatures and will
automatically switch off if the temperature
becomes too high. The operation will
resume when the motor has sufficiently
cooled down (after about 30 minutes).
ALL IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY.
DIGIMASTER | DIGITAL FOOD PROCESSOR INSTRUCTION MANUAL
5
