JVC GR-D390UC /connections Mode d’emploi

SOFTWARE INSTALLATION AND

USB CONNECTION GUIDE

ENGLISH

Filename [M6D1_01Cov.fm]

LYT1532-002A EN

M6D1.book Page 1 Thursday, June 29, 2006 12:06 PM

Master Page: Left

JVC SOFTWARE LICENSE AGREEMENT..

.................................................................. 3

Notice for Users............................................ 5

System Requirements .................................. 6

Software Installation (Windows®).................. 7

Connections (Windows®) .............................. 9

Viewing the Contents of a Memory Card

(Windows®) .............................................. 10

Copying Files to the PC (Windows®) ........... 11

Playing Back Files on the PC (Windows®)... 11

Disconnecting the USB Cable (Windows®).. 12

Connections (Macintosh)............................. 13

Viewing the Contents of a Memory Card

(Macintosh).............................................. 14

Copying Files to the PC (Macintosh) ........... 15

Playing Back Files on the PC (Macintosh)... 15

Disconnecting the USB cable (Macintosh) .. 16

User’s Guide/Help/Readme (Windows®) ..... 16

Overview of Enjoying the Moving or Still

Images on the PC.................................... 17

Contents

M6D1.book Page 2 Thursday, June 29, 2006 12:06 PM

—3—

Master Page: Cov

JVC SOFTWARE LICENSE

AGREEMENT

The right to use the Program is granted by

Victor Company of Japan, Limited (“JVC”)

to You only on the condition that You agree

to the following.

Should You not agree to the terms hereof,

You may not install or use the Program.

HOWEVER, INSTALLING OR USING THE

PROGRAM INDICATES YOUR

ACCEPTANCE OF THESE TERMS AND

CONDITIONS.

1COPYRIGHT; OWNERSHIP

You acknowledge that all copyrights and

other intellectual property rights in the

Program are owned by JVC and its

licensor, and remain vested in JVC and

such licensor. The Program is protected

under the copyright law of Japan and

other countries, and related

Conventions.

2GRANT OF LICENSE

(1) Subject to the conditions of this

Agreement, JVC grants to You a non-

exclusive right to use the Program.

You may install and use the Program

on a HDD or other storage devices

incorporated in Your PC.

(2) You may make one (1) copy of the

Program solely for your personal

backup or archival purposes.

3RESTRICTION ON THE

PROGRAM

(1) You may not reverse engineer,

decompile, disassemble, revise or

modify the Program, except to the

extent that expressly permitted by

applicable law.

(2) You may not copy or use the

Program, in whole or in part, other

than as expressly specified in this

Agreement.

(3) You have no right to grant a license to

use the Program, and may not

distribute, rent, lease or transfer the

Program to any third party or

otherwise let them use the Program.

4LIMITED WARRANTY

JVC warrants that any media in which

the Program is embodied are free from

any defects in materials and

workmanship for a period of thirty (30)

days from the date of Your purchasing

any our products accompanying the

Program. JVC’s entire liability and your

exclusive remedy in connection with the

Program shall be replacement of such

defective media. EXCEPT FOR THE

EXPRESS WARRANTIES STATED

HEREIN AND TO THE EXTENT

PERMITTED BY APPLICABLE LAW,

JVC AND ITS LICENSORS DISCLAIM

ANY OTHER WARRANTIES, EITHER

EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO IMPLIED

WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR

PURPOSE IN REGARD TO THE

PROGRAM AND THE

ACCOMPANYING PRINTED

MATERIALS. SHOULD THERE BE ANY

PROBLEM ARISING FROM OR

CAUSED BY THE PROGRAM, YOU

SHOULD SETTLE ALL SUCH

PROBLEM AT YOUR OWN COST AND

EXPENSE.

IMPORTANT

TO CUSTOMERS: PLEASE MAKE

SURE TO READ THIS CAREFULLY

BEFORE INSTALLING OR USING THE

SOFTWARE PROGRAM NAMED

“DIGITAL PHOTO NAVIGATOR”

(“Program”) ON YOUR PC.

CONTINUED ON NEXT PAGE

M6D1.book Page 3 Thursday, June 29, 2006 12:06 PM

—4—

Master Page: Left

5LIMITED LIABILITY

TO THE EXTENT PERMITTED BY

APPLICABLE LAW, IN NO EVENT

SHALL JVC AND ITS LICENSORS BE

LIABLE FOR ANY INDIRECT,

SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES

WHATSOEVER, REGARDLESS OF

THE FORM OF ACTION WHETHER IN

CONTRACT, TORT OR OTHERWISE

ARISING OUT OF OR IN

CONNECTION WITH THE USE OF OR

INABILITY TO USE THE PROGRAM,

EVEN IF JVC HAS BEEN ADVISED OF

THE POSSIBILITY OF SUCH

DAMAGES. YOU WILL INDEMNIFY

AND HOLD HARMLESS JVC FROM

ANY LOSS, LIABILITY OR COST

ARISING OUT OF OR IN ANY WAY

CONNECTED TO CLAIMS FROM ANY

THIRD PARTY RELATING TO THE USE

OF THE PROGRAM.

6TERM

This Agreement will become effective on

the date when You install and use the

Program on Your machine, and continue

to be in effect until the termination under

the following provision.

Should You breach any provision of this

Agreement, JVC may terminate this

Agreement without giving any notice to

You. In this event, JVC may claim

against You for any damages caused by

Your breach. Should this Agreement be

terminated, You must immediately

destroy the Program stored in Your

machine (including the erasing from any

memory in Your PC), and no longer own

such Program.

7EXPORT CONTROL

You agree that You will not ship, transfer

or export the Program or underlying

information and technology to any

countries to which Japan and other

relevant countries have initiated an

embargo on such goods.

8U.S. GOVERNMENT USER

If You are an agency of the United

States of America (the “Government”),

You acknowledge JVC’s representation

that the Program is a “Commercial Item”

as defined in Federal Acquisition

Regulation (FAR) part 2.101 (g)

consisting unpublished “Commercial

Computer Software” as those items are

used at FAR part 12.212 and is only

licensed to You with the same use rights

JVC grants all commercial end users

pursuant to the terms of this Agreement.

9GENERAL

(1) No modification, change, addition,

deletion or other alternation of or to

this Agreement will be valid unless

reduced to writing and signed by an

authorized representative of JVC.

(2) If any part of this Agreement is held

invalid by or in conflict with any law

having jurisdiction over this

Agreement, the remaining provisions

will remain in full force and effect.

(3) This Agreement shall be governed by

and interpreted under the laws of

Japan. The Tokyo District Court has

jurisdiction over all disputes which

may arise with respect to the

execution, interpretation and

performance of this Agreement.

Victor Company of Japan, Limited

NOTE:

If You acquired the Program in Germany,

the provisions of Sections 4 (Limited

Warranty) and 5 (Limited Liability) provided

above will be replaced with those of the

German version of this Agreement.

M6D1.book Page 4 Thursday, June 29, 2006 12:06 PM

Master Page: Right

—5—

You can find the latest information (in

English) on the provided software

program at our world wide web server at

http://www.jvc-victor.co.jp/english/

index-e.html

Use of this software is authorized according

to the terms of the software license.

When contacting the nearest JVC office or

agency in your country about this software

(refer to the JVC Worldwide Service

Network at http://www.jvc-victor.co.jp/

english/worldmap/index-e.html), please fill

out the following and have the appropriate

information ready.

Please note that it may take some time to

respond to your questions, depending on

their subject matter.

JVC cannot answer questions regarding

basic operation of your PC, or questions

regarding specifications or performance

of the OS, other applications or drivers.

CyberLink

For details of CyberLink’s technical support

service, refer to the “Readme” of each

software (墌pg. 16) and the following

website: http://www2.cli.co.jp/products/

dvc/

CAUTION:

●Operate this equipment according to

the operating procedures described in

this manual.

●Use only the provided CD-ROM. Never

use any other CD-ROM to run this

software.

●Do not attempt to modify this software.

●Changes or modifications not approved

by JVC could void user’s authority to

operate the equipment.

How to handle a CD-ROM

●Take care not to soil or scratch the

mirror surface (opposite to the printed

surface). Do not write anything or put a

sticker on either the front or back

surface. If the CD-ROM gets dirty,

gently wipe it with a soft cloth outward

from the center hole.

●Do not use conventional disc cleaners

or cleaning spray.

●Do not bend the CD-ROM or touch its

mirror surface.

●Do not store your CD-ROM in a dusty,

hot or humid environment. Keep it away

from direct sunlight.

Notice for Users

Product Name

Model

Problem

Error Message

Manufacturer

Model

□Desktop

□Laptop

CPU

Memory MB

Available Hard

Disk Space MB

M6D1.book Page 5 Thursday, June 29, 2006 12:06 PM

—6—

Master Page: Left

䡲Windows®

The following requirements must be

satisfied to connect a camcorder to a PC

and to use Digital Photo Navigator.

OS: Windows®Millennium Edition (Me)

(pre-installed), Windows®2000 Professional

(2000) (pre-installed), Windows®XP Home

Edition (XP) (pre-installed), or

Windows®XP Professional (XP) (pre-

installed)

CPU: Intel MMXTM Pentium®, at least

200 MHz

RAM: At least 64 MB

Free hard disk space: At least 10 MB for

installation, at least 500 MB recommended

Connector: USB connector

Display: Must be capable of displaying

800 x 600 dots with 16-bit color

Miscellaneous: Internet Explorer 5.5 or

later

For PowerProducer 2 Gold VCD

In addition to the requirements above, the

following requirements must be satisfied to

use PowerProducer 2 Gold VCD.

OS: The same as requirements above.

CPU: Intel Pentium® II, at least 450 MHz,

Intel Pentium®III, at least 800 MHz

recommended

RAM: At least 128 MB, at least 256 MB

recommended

Free hard disk space: At least 100 MB for

installation, at least 1 GB for creating VCD

Connector: IEEE1394 (i.LINK) connector.

Miscellaneous: DirectX 9.0 or later

(DirectX 9.0 is installed automatically),

Internet Explorer 5.5 or later

Supported media: CD-R/RW

Display: Must be capable of displaying

1024 x 600 dots with 16-bit color

For more details, refer to CyberLink web

site:http://www.gocyberlink.com/english/

products/powerproducer/2_gold/

comp_dvd_drives.jsp

䡲Macintosh

The following requirements must be

satisfied to connect a camcorder to a PC.

Hardware: iMac, iBook, Power Mac G4 or

G5, PowerBook G3 or G4, eMac, Mac Mini

equipped with a USB connector

OS: Mac OS X (10.1.5, 10.2.1 to 10.2.8,

10.3.1 to 10.3.9, 10.4.2, 10.4.3)

RAM: At least 128 MB

●The system requirements information

above is not a guarantee that the

provided software will work on all

personal computers meeting those

requirements.

●If your PC does not meet the system

requirements above, you can use the

optional USB reader/writer CU-VUSD70,

the PC card adapter CU-VPSD60 or the

floppy disk adapter CU-VFSD50 to load

the files in the memory card to the hard

disk on your PC.

(Refer to “JVC Accessories” on our world

web site at: http://www.jvc-victor.co.jp/

english/accessory/)

●Windows®is either registered trademarks

or trademarks of Microsoft Corporation in

the United States and/or other countries.

●Macintosh is a registered trademark of

Apple Computer, Inc.

●Other product and company names

included in this instruction manual are

trademarks and/or registered trademarks

of their respective holders.

System Requirements

M6D1.book Page 6 Thursday, June 29, 2006 12:06 PM

Master Page: Right

—7—

Follow the procedure described below to

install the software. From the [SETUP]

screen in step 2, you can install the

following software. Quit any other software

you are using. (Check that there are no

other application icons on the status bar.)

PowerProducer 2 Gold VCD

PowerProducer 2 Gold VCD is software for

creating movie discs incorporating not only

video but also slideshows. This software

uses a simple wizard format for creating a

wide range of different format discs. You

can also edit imported video. You can

import video from the camera, edit it, and

then create a slideshow from still images.

You can create a customized menu for the

video or slideshow and write the contents to

VCD.

Digital Photo Navigator 1.5

This application is used to organize still

images and convert them into a variety of

formats.

1Load the provided CD-ROM into

the PC.

After a moment, the [SETUP] screen

appears.

●From the [SETUP] screen, you can

install the software.

●If the [SETUP] screen does not

appear, double-click the CD-ROM

icon in the [My Computer] window.

2Click [Install] on the right side

of the desired software and

follow the on screen

instructions to complete the

installation.

The installation of the software starts.

The procedure differs depending on

the software.

Following steps are the example of

PowerProducer 2 Gold on

Windows®XP.

[Choose Setup Language] screen

appears.

Select the desired language and click

[OK].

Then, [PowerProducer Setup] screen

appears.

Click [Next].

[License Agreement] screen appears.

Click [Yes].

[Customer Information] screen

appears.

Confirm your information and click

[Next].

●It is possible to change the

information.

Then, [Choose Destination Location]

screen appears.

Software Installation

(Windows®)

CONTINUED ON NEXT PAGE

M6D1.book Page 7 Thursday, June 29, 2006 12:06 PM

—8—

Master Page: Left

Click [Next].

[Select Working Directory] screen

appears.

Click [Next].

Then, [Select Program Folder] screen

appears.

Click [Next].

[Select will install...] screen appears.

Click [Next].

Wait for a moment until the installation

is finished.

When the installation is finished,

[Setup Complete] screen appears.

Click [Finish]. Restarts the PC.

For Windows®Me/2000:

Before [Setup Complete] screen

appears, [Question] screen appears.

Click [Yes]. Then, [DMA setting] screen

appears. Click [OK]. [Setup Complete]

screen appears. Click [Finish] to

restart the PC.

Install Digital Photo Navigator 1.5 in the

same way.

To display [SETUP] screen, double-click the

CD-ROM icon in the [My Computer]

window.

NOTE:

If you perform installation of a software that

is already installed, uninstallation will start.

In this case, perform the installation again

after uninstallation is finished.

M6D1.book Page 8 Thursday, June 29, 2006 12:06 PM

Master Page: Right

—9—

Connecting the USB cable

Connect the USB cable to copy still image files in a memory card to the PC.

Connecting the DV cable

Connect the DV cable to use PowerProducer in capturing video.

1To assure safety, make sure all

units are turned off before

making any connections.

2Use the USB cable or DV cable

to connect the camcorder to the

PC.

NOTES:

●It is recommended to use the AC

Adapter as the power supply instead

of the battery pack.

●When the USB cable or DV cable is

connected, turning on or off the

camcorder or switching the VIDEO/

MEMORY (DSC) mode on the camcorder

causes malfunctions of the PC.

●If PowerProducer does not recognize the

camcorder, exit PowerProducer once,

then start it again.

●If you connect the camcorder to the PC

through a USB hub, compatibility issues

between the hub and the PC may result in

instability in the operation of the PC. If this

happens, connect the camcorder directly

to the PC, not through the hub.

●Do not use an extension USB cable.

●When connecting the camcorder to a PC

using a DV cable, make sure to follow the

procedure below. Connecting the cable

incorrectly may cause malfunctions to the

camcorder and/or the PC.

●Connect the DV cable first to the PC, and

then to the camcorder.

●Connect the DV cable (plugs) correctly

according to the shape of the DV

connector.

Connections (Windows®)

To USB connector PC

To USB connector

USB cable

Camcorder

DV cable (optional)

To DV connector To IEEE1394

connector

M6D1.book Page 9 Thursday, June 29, 2006 12:06 PM

—10—

Master Page: Left

1Make sure that there is a

memory card in the camcorder.

2Set the camcorder’s VIDEO/

MEMORY Switch to “MEMORY”.

3Set the camcorder’s Power

Switch to “PLAY” while

pressing down the Lock Button

located on the switch.

The camcorder turns on.

4Connect the camcorder to the

PC with a USB cable. (墌pg. 9)

On the camcorder’s LCD monitor

[USB] appears.

5WhenusingWindows®XP:

The [Removable

Disk] window

appears on the

PC’s screen

after a moment.

Select [Open

folders to view

files using

Windows

Explorer] and

click [OK].

NOTE:

If the [Removable Disk] window does

not appear, confirm the connection

(墌pg. 9) or perform the steps 1and

2below.

When using Windows®Me/2000:

1Double-click the [My Computer] icon

on the desktop. The [Removable

Disk] icon which represents the

memory card in the camcorder

appears in the [My Computer]

window.

2Double-click the [Removable Disk]

icon.

6The folders in the memory card

appear.

Different file types are stored in

different folders.

[DCIM]: Contains folders with still

images (extension “.jpg”)

[MISC]: Contains folders with DPOF

setting data

NOTES:

●Saving the wrong kinds of files in a

memory card or deleting files or folders

from a memory card can cause problems

with the operation of the camcorder.

When it is necessary to delete a file from

a memory card, delete it through the

camcorder.

●Never disconnect the USB cable while

“ ” is displayed on the

camcorder’s LCD monitor.

●If you are using a brand new memory

card, you need to initialize the memory

card with the camcorder first. You may not

be able to copy files from the memory

card to the PC without doing so.

●The file extension may not appear

depending on the [FOLDER] option

setting of Windows®.

Viewing the Contents of a

Memory Card (Windows®)

DPOF setting data

Still images

M6D1.book Page 10 Thursday, June 29, 2006 12:06 PM

Table des matières

Langues :

Autres manuels JVC Logiciel

JVC

JVC GR-DVL505U Manuel utilisateur

JVC

JVC VN-S400U Manuel utilisateur

JVC

JVC VN-S200U Manuel utilisateur

JVC

JVC Digital Photo Navigator LYT1361-012A Manuel utilisateur

JVC

JVC GY-DV300U - 1/3" 3-ccd Dv Camcorder Mode d’emploi

JVC

JVC GZ-HM960BUS Manuel utilisateur

JVC

JVC RECORDING SOFTWARE VN-RS800U Manuel utilisateur

JVC

JVC PC Connection Kit Manuel utilisateur

JVC

JVC LYT1361-001A Manuel utilisateur

JVC

JVC GZ MG21 - Everio Camcorder - 800 KP Manuel utilisateur

JVC

JVC ProHD Log Manuel utilisateur

JVC

JVC Digital Photo Navigator ImageMixer with VCD... Manuel utilisateur

JVC

JVC GR-DVM90U Manuel utilisateur

JVC

JVC GV-LS2 Manuel utilisateur

JVC

JVC ImageMixer 1.7 LYT1282-001A Manuel utilisateur

JVC

JVC GR-DVL500U - Digital Camcorder Manuel de l'opérateur

JVC

JVC GV-LS2 Manuel utilisateur

JVC

JVC GR-SXM340U Manuel utilisateur

JVC

JVC GY-HM700U - Prohd Compact Shoulder Solid State... Manuel utilisateur

JVC

JVC USB Connection Kit Manuel utilisateur

JVC

JVC Blank Media LYT1015 Manuel utilisateur

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur