JVC GR-FXM45 Manuel utilisateur

GR-FXM45

GR-FXM15

COMPACT VHS CAMCORDER

LYT0336-001B

INSTRUCTIONS

CONTENTS

GETTING STARTED

6 – 13

Power............................................. 6

Clock (Lithium) Battery Insertion/Removal

... 8

Date/Time Settings ............................. 9

Recording Mode Setting ...................... 10

Tape Length Setting ........................... 10

Loading/Unloading A Cassette .............. 11

Grip Adjustment ............................... 12

Viewfinder Adjustment ....................... 12

Shoulder Strap Attachment .................. 13

Tripod Mounting ............................... 13

RECORDING

–

Basic Recording ................................ 14

Basic Features ................................. 18

Advanced Features ............................ 23

PLAYBACK

–

Basic Playback ................................. 38

Features ........................................ 39

Using The Cassette Adapter ................. 41

Basic Connections And Tape Dubbing ....... 42

USING THE REMOTE

CONTROL UNIT

–

Random Assemble Editing .................... 46

Insert Editing................................... 50

Audio Dubbing ................................. 51

USER MAINTENANCE

TROUBLESHOOTING

–

INDEX

–

Indications...................................... 55

Controls, Connectors And Indicators ........ 56

Terms ........................................... 58

CAUTIONS

–

SPECIFICATIONS

2EN

Dear Customer,

Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety informa-

tion and precautions contained in the following pages to ensure safe use of your new camcorder.

SAFETY PRECAUTIONS

Using This Instruction Manual

•All major sections and subsections are listed in the Table Of Contents (Zcover page).

•Notes appear after most subsections. Be sure to read these as well.

•Basic and advanced features/operation are separated for easier reference.

It is recommended that you . . .

.... refer to the Index (Zpgs. 53 – 56) and familiarize yourself with button locations, etc. before use.

.... read thoroughly the Safety Precautions

(Zpgs. 57, 58). They contain extremely important information regarding the safe use of your new

camcorder.

WARNING:

TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE

THIS UNIT TO RAIN OR

MOISTURE.

Warning on lithium battery

(for clock operation and remote control unit)

The battery used in this device may present a

fire or chemical burn hazard if mistreated. Do

not recharge, disassemble, heat above 100°C or

incinerate.

Replace the battery with Panasonic (Matsushita

Electric), Sanyo or Maxell CR2025; use of

another battery may present a risk of fire or

explosion.

nDispose of used battery promptly.

nKeep away from children.

nDo not disassemble and do not dispose of in

fire.

CAUTIONS:

nTo prevent shock, do not open the cabinet.

No user serviceable parts inside. Refer

servicing to qualified personnel.

nWhen you are not using the AC Power

Adapter/Battery charger for a long period of

time, it is recommended that you disconnect

the power cord from AC outlet.

NOTES:

●

The rating plate (serial number plate) and

safety caution are on the bottom and/or the

back of the main unit.

●

The rating plate (serial number plate) of the

AC Power Adapter/Charger is on its bottom.

This camcorder is designed to be used with

PAL-type colour television signals. It cannot be

used for playback with a television of a different

standard. However, live recording and LCD

monitor/viewfinder playback are possible

anywhere. Use the BN-V12U/BN-V20U battery

packs and, to recharge them, the provided

multi-voltage AC Power Adapter/Charger. (An

appropriate conversion adapter may be

necessary to accommodate different designs of

AC outlets in different countries.)

nThis camcorder is designed exclusively for the

VHS-C video cassette. Only cassettes marked

VHS-C can be used with this unit.

nHQ VHS is compatible with existing VHS

equipment.

This unit is produced to comply with Standard

IEC Publ. 65.

EN3

ATTENTION USERS OF

RECHARGEABLE BATTERIES

DO NOT DISPOSE RECHARGEABLE BATTERIES OR PRODUCTS POWERED BY NON-

REMOVABLE RECHARGEABLE BATTERIES, THESE BATTERIES AND PRODUCTS CAN BE

RECYCLED.

AT THE END OF NORMAL LIFE,

IN AUSTRALIA, RETURN TO YOUR POINT OF PURCHASE OR MAIL TO:

Hagemeyer (Australasia) B.V. 5-7 Garema Circuit Kingsgrove NSW 2208 Australia

Attn : Service Dept.

Phone : (02)750 3777

IN NEW ZEALAND, PLEASE RETURN BATTERIES BY MAIL TO:

Hagemeyer (NZ) Limited P.O. Box 100589 Auckland 1000

Phone : (09)415 8758

4EN

MAJOR FEATURES

PROVIDED ACCESSORIES

• AC Power Adapter/

Charger AA-V15EA

•Cassette Adapter

C-P7U

•Shoulder Strap

• Battery Pack

BN-V20U

•DC Cord

•Lithium Battery

CR2025

•x1 for GR-FXM15

(clock operation)

•x2 for GR-FXM45

(clock operation

and remote control)

•Editing Cable

(GR-FXM45 only)

•Audio/Video

(A/V) Cable

• Remote Control

RM-V700U

(GR-FXM45 only)

Programme AE with Special

Effects (Zpg. 24, 25)

nElectronic Fog Filter

nND Effect nSepia n Twilight

nSports nNega/Posi

n1/2000 sec. High Speed Shutter

Snapshot (GR-FXM45 only)

(Zpg. 22)

5-Sec. Recording

(GR-FXM15 only) (Zpg. 20)

Menu Adjustment

(Zpg. 28, 29, 30)

Integrated Auto Light

(GR-FXM45 only) (Zpg. 21)

Digital Hyper Zoom

(Zpg. 18)

Zoom in

Zoom out

REMEMBER Picture Stabilizer (Zpg. 20)

LCD Colour Monitorc (Zpg. 16)

EN5

Using the battery pack

Hook its end to the camcorder ( ) and push the

battery pack in until it locks in place ( ).

(Charging procedure, Zpg. 6)

To remove the battery pack

Slide BATTERY RELEASE and pull out the battery

pack.

QUICK OPERATION GUIDE

1Set the Power Switch to “PLAY”.

2Press REW (

— The tape will automatically stop at the

beginning of the tape.

3Press PLAY/PAUSE (

/6).

— Playback starts and the playback picture

appears.

•To stop playback, press STOP (5).

(For more details, Zpg. 38)

•The viewfinder switches off automatically to

save power when the LCD monitor is opened

at an angle of over 60 degrees.

•The LCD monitor turns on/off when it is

opened/closed at approx. 60 degrees.

Or simply play back the tape on a VHS VCR

using the Cassette Adapter Zpg. 41.

1Turn the LENS COVER Open/Close Ring to

open the lens cover.

2Set the Power Switch to “AUTO” or “PRO.”.

— The power lamp will light and an image

will appear.

3Press the Recording Start/Stop Button.

— Recording starts.

•To stop recording temporarily, momentarily

press the Recording Start/Stop Button once

again.

(For more details, Zpgs. 14, 15)

•The viewfinder switches off automatically to

save power when the LCD monitor is opened

at an angle of over 60 degrees.

•The LCD monitor turns on/off when it is

opened/closed at approx. 60 degrees.

SUPPLY POWER

INSERTING A VIDEO CASSETTE

PLAYBACK SHOOTING

Set to “PLAY”

Hook on.

Push in.

BATTERY RELEASE

LENS COVER

Open/Close Ring

Set to “AUTO”

or “PRO.”

Recording Start/Stop Button

REW (

) Button

PLAY/PAUSE

(

/6) Button

STOP

(5) Button

1Open the LCD monitor to an angle of over 60

degrees.

2Slide EJECT to open the cassette holder.

3Insert a video cassette.

4Press PUSH to close the cassette holder.

(For more details, Zpg. 11)

PUSH Button

EJECT Switch

6EN

GETTING STARTED

Power

This camcorder’s 3-way power supply system lets you

choose the most appropriate source of power.

NOTES:

●

No function is available without power supply.

●

Use only the specified power supply.

●

Do not use provided power supply units with other

equipment.

CHARGING THE BATTERY PACK

SUPPLY POWER

Connect the charger’s AC power cord to a wall outlet.

ATTACH BATTERY PACK

Align the marks and slide the battery pack in the

direction of the arrow until it locks in place.

•The CHARGE indicator begins blinking to indicate

charging has started.

DETACH BATTERY PACK

When the CHARGE indicator stops blinking but stays

lit, charging is finished. Slide the battery pack

opposite the direction of the arrow.

USING THE BATTERY PACK

ATTACH BATTERY PACK

Hook its end to the camcorder ( ) and push the

battery pack in until it locks in place ( ) .

DETACH BATTERY PACK

Slide BATTERY RELEASE and pull out the battery

pack.

ATTENTION:

Before detaching the power source,

make sure that the camcorder’s power

is turned off. Failure to do so can result

in a camcorder malfunction.

REFRESH

The AC Power Adapter/Charger features a

REFRESH function that allows you to fully

discharge the battery pack before recharg-

ing.

Perform the REFRESH function after no less

than 5 chargings.

To discharge the battery . . .

.... attach the battery pack to the adapter as

shown in the above illustration. Then

push REFRESH. The REFRESH indicator

lights when discharging starts, and goes

out when discharging is complete.

CHARGE indicator

Marks

To AC outlet

Hook on.

Push in.

BATTERY RELEASE

REFRESH indicator

REFRESH switch

Battery pack Charging time Discharging time

BN-V12U approx. 1 hr. 10 min. approx. 3 hrs. 30 min.

BN-V20U approx. 1 hr. 50 min. approx. 6 hrs. 40 min.

Approximate recording time (unit: min.)

LCD LCD LCD

Battery pack

monitor on/ monitor off/ monitor on/

Viewfinder off Viewfinder on Viewfinder on

BN-V12U 60 (35) 65 (40) 50 (35)

BN-V20U 95 (60) 105 (65) 85 (55)

( ) : when the video light is on (GR-FXM45 only).

INFORMATION:

The High Capacity battery pack BN-V856U (optional)

provides approx. 7 hours of recording time when the

viewfinder is on and the LCD monitor and the video light

are off.

It is impossible to charge the BN-V856U battery pack

using the provided AC Power Adapter/Charger. Use the

optional AA-V80EG AC Power Adapter/Charger.

EN7

Charge Marker

A charge marker is provided on the battery pack to

help you remember whether it has been charged or

not. Two colours are provided (red and black)—you

choose which one means charged and which means

discharged.

NOTES:

●

The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the

frequency of zooming. It is safer to have spare battery packs to cover 3 times the planned shooting time.

●

Charging times noted on page 6 are for a fully discharged battery pack, and discharging times are for a fully

charged battery pack.

●

Charging and discharging times vary according to the ambient temperature and the status of the battery pack.

●

Remember to set the charge marker after charging a battery pack or after detaching a discharged one from

your camcorder.

●

Perform the REFRESH function after no less than 5 chargings.

●

While the AC Power Adapter/Charger’s power cord is disconnected from the AC outlet, it is possible to

discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger does

not charge the battery. When discharging is complete, detach the battery from the AC Power Adapter/

Charger to store it.

●

High temperatures can damage the battery pack, so use only where good ventilation is available. Do not

allow it to discharge in a container, such as a bag.

●

If you stop recharging or discharging part way through, make sure to remove the battery pack before

unplugging the adapter’s AC cord.

●

Remove the battery pack from the adapter immediately after discharging.

●

To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

●

Make sure you unplug the DC cord before charging or discharging the battery pack.

●

The CHARGE indicator may not light properly with a brand new battery pack, or with one that has been

stored for an extended period. In this case, remove and reattach the battery pack and recharge it. The

CHARGE indicator should blink during recharging. If not, contact your nearest JVC dealer.

USING AC POWER

Use the AC Power Adapter/Charger (connect as

shown in the illustration).

NOTES:

●

The provided AC Power Adapter/Charger features

automatic voltage selection in the AC range from

110 V to 240 V.

●

When using the DC cord, make sure you connect

the end of the cord with the core filter to the

camcorder. The core filter reduces interference.

USING A CAR BATTERY

Use the optional Car Battery Charger/Adapter

(connect as shown in the illustration).

NOTES:

●

When using the car battery, leave the engine

idling.

●

The optional Car Battery Charger/Adapter (BH-V3E)

can also be used to charge the battery pack (except

BN-V20U/V856U).

●

When using the optional Car Battery Charger/

Adapter, refer to the respective instruction booklet.

To DC IN jack

DC OUT

terminal

To AC outlet

AC Power

Adapter/Charger

AA-V15EA

DC Cord

To car ’s

cigarette

lighter

socket

Charge marker

Car Battery

Charger/Adapter

BH-V3E (optional)

8EN

GETTING STARTED

(cont.)

Clock (Lithium) Battery Insertion/Removal

This battery is necessary for clock operation and to

perform date/time settings.

SWITCH OFF POWER

Switch off the unit’s power and remove the power

supply unit (battery pack, AC Power Adapter/Battery

Charger, etc.).

REMOVE BATTERY HOLDER

Pull out the battery holder.

INSERT BATTERY IN HOLDER

Insert the battery in the holder, and be sure to have

the “+” mark visible.

RE-INSERT HOLDER

Slide the holder back into the slot until you hear a

click.

NOTES:

●

See “SAFETY PRECAUTIONS” (

pg. 2) for information

on safe handling of lithium batteries.

●

To avoid losing the battery and/or battery holder, place

the camcorder with the grip side up as shown in the

illustration when inserting/removing the battery.

Slot

Battery holder

EN9

M.W.B.

D . ZOOM

TELE MACRO

DATE TIME

TAPE LENGTH

RETURN

AUTO

OFF

T45

M.W.B.

D . ZOOM

TELE MACRO

DATE TIME

TAPE LENGTH

RETURN

AUTO

OFF

T45

YEAR

MONTH

DAY

TIME

EXIT

1999

22:50

DATE TIME

Date/Time Settings

ACCESS MENU SCREEN

Set the Power Switch to “PRO.”, then press MENU.

•The power lamp comes on.

SELECT FUNCTION

Rotate the Select Dial to move the highlight bar to

“DATE/TIME”, then press it. The DATE/TIME Menu

appears.

•If you decide you want to return the date and time

to the previous settings, rotate the Select Dial to

move the highlight bar to “EXIT” and press it, then

go to step 6.

•If you want to set only the time without changing

the date, go to step 4.

SET DATE

Rotate the Select Dial to move the highlight bar to the

item you want to set and then press it. When the

setting begins blinking, rotate the Select Dial until the

correct setting appears and then press it. The setting

stops blinking.

•Repeat this procedure until you’re satisfied with the

Date settings (“YEAR”, “MONTH” and “DAY”).

SET TIME

Rotate the Select Dial to move the highlight bar to

“TIME” and then press it. When the hour setting

begins blinking, rotate the Select Dial until the correct

setting appears and then press it. When the hour

setting stops blinking and the minute setting begins

blinking, rotate the Select Dial until the correct setting

appears and then press it. The minute setting stops

blinking.

START CLOCK OPERATION

When none of these settings (YEAR, MONTH, DAY,

TIME) blinks, rotate the Select Dial to move the

highlight bar to “EXIT”, and press it. The Menu

Screen reappears with the highlight bar on

“RETURN”.

CLOSE MENU SCREEN

Press the Select Dial.

NOTE:

To display the date and time in the camcorder’s display

and on a connected TV, see “Date/Time Insert”

(

pg. 26).

Power lamp

24-hour indication

Menu Screen

DATE/TIME Menu

Select Dial

MENU Button

Power Switch

Display

10 EN

M.W.B.

D . ZOOM

TELE MACRO

DATE TIME

TAPE LENGTH

RETURN

AUTO

OFF

T45

M.W.B.

D . ZOOM

TELE MACRO

DATE TIME

TAPE LENGTH

RETURN

AUTO

OFF

T60

T30

T45

T60

EXIT

TAPE LENGTH

T45

GETTING STARTED

(cont.)

Menu Screen

Tape length indicator

TAPE LENGTH

Setting Menu

Display

Tape Length Setting

Set the tape length according to the length of the tape

used.

ACCESS MENU SCREEN

First set the Power Switch to “PRO.”. Press MENU.

SELECT FUNCTION

Rotate the Select Dial to move the highlight bar to

“TAPE LENGTH”, then press it. The TAPE LENGTH

Setting Menu appears.

SET TAPE LENGTH

Rotate the Select Dial to move the highlight bar to the

correct setting. T30 = 30 minutes of recording time,

T45 = 45 minutes, and T60 = 60 minutes.

•If you decide you want to return the tape length to

the previous setting, rotate the Select Dial to move

the highlight bar to “EXIT”.

CLOSE MENU SCREEN

Press the Select Dial. The Menu Screen reappears

with the highlight bar on “RETURN”. Press the Select

Dial again to close the Menu Screen.

NOTE:

The tape remaining time (

pg. 15) displayed in the

viewfinder is correct only if the correct tape length has

been selected.

Select Dial Power Switch

MENU Button

Viewfinder

Recording mode

indicator

Recording Mode Setting

Set depending on your preference.

SET RECORDING MODE

First set the Power Switch to “AUTO” or “PRO.”.

Press SP/LP for more than 1 second. “SP” (Standard

Play) provides higher picture and sound quality and is

better for dubbing, while “LP” (Long Play) is more

economical, providing twice the recording time.

NOTE:

If the recording mode is switched during recording, the

playback picture will be blurred at the switching point.

SP/LP Recording Mode Button

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels JVC caméscope

JVC

JVC Connected Cam GY-HC500E Manuel utilisateur

JVC

JVC Everio R GZ-RX605BE Manuel d'utilisation et d'entretien

JVC

JVC GR-D750AH Manuel utilisateur

JVC

JVC LYT1094-001A Manuel utilisateur

JVC

JVC Everio LYT2211-002A Manuel d'utilisation et d'entretien

JVC

JVC GZ-MG130UA Manuel utilisateur

JVC

JVC EVERIO GZ-HM690U Manuel utilisateur

JVC

JVC XH A1 Manuel utilisateur

JVC

JVC GZ-MG47EX Manuel utilisateur

JVC

JVC JY-HD10EK Manuel utilisateur

JVC

JVC Everio GZ-HM670 Manuel d'utilisation et d'entretien

JVC

JVC GR-DVL220U Manuel utilisateur

JVC

JVC GZ HD5 - Everio Camcorder - 1080i Manuel utilisateur

JVC

JVC GR-AX760 Manuel utilisateur

JVC

JVC GR-D770US Manuel d'instructions

JVC

JVC GZ-MG155U Manuel utilisateur

JVC

JVC GY-HD250CHU Manuel utilisateur

JVC

JVC HM700U - Camcorder - 1080p Manuel utilisateur

JVC

JVC Everio GZ-HM320 Manuel d'utilisation et d'entretien

JVC

JVC GZ-MG150US Guide de l'administrateur

JVC

JVC GZ-MG67E Manuel utilisateur

JVC

JVC GR-SXM77EA Manuel utilisateur

JVC

JVC Everio GZ-R10 Manuel utilisateur

JVC

JVC GR-D22 Manuel utilisateur

Manuels caméscope populaires d'autres marques

Toshiba

Toshiba CAMILEO Z100 Manuel utilisateur

Panasonic

Panasonic NV-VS40B Manuel utilisateur

Canon

Canon RC 260 Manuel utilisateur

Sony

Sony Handycam DCR-DVD7E Manuel utilisateur

Brinno

Brinno TimeLapse TLC200 Manuel utilisateur

Panasonic

Panasonic AG-HMC152EN Manuel utilisateur

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Manuel utilisateur

MYDLINK

MYDLINK DCS-6100LH Manuel utilisateur

Sony

Sony video Hi8 Handycam CCD-TR555 Manuel utilisateur

SECURECOM

SECURECOM V-5014B Manuel utilisateur

Panasonic

Panasonic HDC-SD100 Manuel utilisateur

Sharper Image

Sharper Image U-VIDEO Manuel utilisateur

Canon

Canon LEGRIA HV40 Manuel utilisateur

Sony

Sony Handycam DCR-VX2000 Manuel utilisateur

RCA

RCA CC616 Manuel utilisateur

Panasonic

Panasonic NVM40 Manuel utilisateur

ATIK Cameras

ATIK Cameras Horizon Manuel utilisateur

Sony

Sony Handycam HDR-CX580V Manuel utilisateur