Jura IMPRESSA X9 Guide de configuration
My Coffee Shop Pty Ltd
ACN 102 850 037
9 Hall Street
Hawthorn Ea t Vic 3123
ph: 03 9946 4160
fax: 03 9822 6269
93/ 1-5 Harwood Street
Pyrmont NSW 2009
ph: 02 9034 6580
fax: 02 9034 6586
clientservices@mycoffeeshop.com.au 1300 365 487 www.mycoffeeshop.com.au
Jura Impre a X9
Operating and cleaning In truction
Cleaning procedures & Products
Jura Impressa X9
My Coffee Shop Pty Ltd
ACN 102 850 03
9 Hall St
Hawthorn East VIC 3123
ph: 03 9946 4160
fax: 03 9822 6269
Shop 93,1-5 Harwood Street
Pyrmont NSW 2009
ph: 02 9034 6580
fax: 02 9034 6586
clientservices@mycoffeeshop.com.au 1300 365 4 7 www.mycoffeeshop.com.au
Daily
See procedure – Daily milk system clean
Must be performed at the end of each day just before the machine is turned off
Purpose: To ensure the milk system is clean overnight so milk does not go off blocking the pathways.
Use Jura cappuccino cleaner – 1 litre bottle (Prod no. 1141)
Weekly
See procedure – Weekly milk system clean
Performed once per week
Purpose: To remove any milk fats to ensure the milk frother works correctly.
Use Jura cappuccino cleaner – See above
When prompted
See procedure – Coffee system clean
Performed only when prompted (Every 220 coffees)
Purpose: Removes coffee oil from the brewing unit and coffee path to maintain the quality of the coffee.
Use Jura cleaning tablets – 6 pk (Prod no. 1111), 25 pk (Prod no. 1112), 100 pk (Prod no. 1113)
See procedures – Changing the filter or Descaling the machine
Perform a filter change or descale only when prompted.
Purpose: Eliminates the formation of lime scale inside the coffee machine maintaining clear pathways,
water temperature and steam pressure.
Use
Prod no. 1133
9 pk – Prod no. 1121
36 pk – Prod no. 1122
Important: Genuine Jura cleaning and descaling tablets must be used as a condition of warranty and
service programs.
End of day cleaning
My Coffee Shop Pty Ltd
ACN 102 850 037
9 Hall Street
Hawthorn Ea t Vic 3123
ph: 03 9946 4160
fax: 03 9822 6269
93/ 1-5 Harwood Street
Pyrmont NSW 2009
ph: 02 9034 6580
fax: 02 9034 6586
clientservices@mycoffeeshop.com.au 1300 365 487 www.mycoffeeshop.com.au
Thi procedure mu t be performed at the end of each day ju t before the
machine i witched off. It i important the milk y tem i not u ed after
the machine ha been cleaned.
1. If you are u ing a milk cooler turn it off u ing the witch
on the back of the cooler or the witch on the wall.
2. Remove the two tube from the milk carton. Place the
milk carton in your fridge overnight.
3. Wipe out the milk fridge with a damp cloth.
4. If the di play how CLEAN follow the in truction
•CLEANING THE DUAL SPOUT
Otherwi e, follow the in truction
•CLEANING THE MILK SYSTEM
5. Empty the drip tray and ground bin.
6. Turn the coffee machine OFF at programming panel ON-OFF witch (A).
Note: If you are u ing a milk fridge, it hould be left on 24 hour per day with the
door clo ed. The milk can be kept in the fridge overnight.
Traditional steam arm: After frothing milk wipe the team arm with a damp cloth.
Run the team for 2 econd to en ure the team arm i clean. At the end of the day
check the team arm i clean before turning off.
If need a i tance plea e call u on 1300 365 4 7
Weekly milk system clean
\
Complete this procedure once a week after the daily milk system clean
Steps:
1. Remove the coffee spout cover by pressing the button down and pulling the cover back towards
you. (Fig 1 – 2
2. Remove the auto frother by pulling it back towards you while making small circular motions with
your hand. (Fig 3
3. Disconnect the flat and froth milk tubes from the auto frother. (Fig 4
4. Separate the auto frother into 12 parts. (Fig 5
5. Soak the parts in 300ml of warm water (not hot and 15ml of Jura cappuccino cleaner for 20 min
(max .
6. Remove the parts from the solution and rinse them under tap water.
7. Re-assemble the auto frother and reconnect the milk tubes.
8. Refit the auto frother ensuring the coffee spout and steam elbows on the auto frother line up with
the outlets on the machine. Push the auto frother back against the face of the machine making
small circular movements with your hand until the auto frother is right back against the machine.
Note: If milk is not flowing normally from the flat or froth outlets, refer to trouble shooting.
Figure 1 Figure 2 Figure 3 Figure 4 Figure 5
Cleaning procedures for the Jura X9
Operating elements
Impressa X9
A Drip tray
B Drip grate
C Grounds bin
D Height-adjustable dual spout
E Frothing key
F Macchiato key
G Milk Coffee key
H x key
I Ristretto key
J Espresso key
K Coffee key
L Cappuccino key
M Display dialog system (incl.
graphics display)
N Bean tank
O Filler funnel for cleaning
tablet
P Cup railing
Q Cover for programming keys
R Water tank
S Steam key
T Hot Water key
U Pivoting hot water spout
V Pivoting steam spout
W
Accessories drawer
Programming keys
A ON / OFF
B Filter
C Decalcify
D Counter
E Access
programming mode
F +
(Page through
parameters / higher
values)
G Rinse
H Clean milk system
I Clean coffee system
J Clean dual spout
K EXIT
L -
(Page through
parameters / lower
values)
CONTENTS
Cleaning t e Milk System Page 2
Cleaning t e Dual Spout Page 3
Cleaning t e Coffee System Page 5
Decalcifying Page 7
Cleaning procedures for the Jura X9
CLEANING THE MILK SYSTEM
CLEANING THE MILK SYSTEMCLEANING THE MILK SYSTEM
CLEANING THE MILK SYSTEM
–
––
–
This must be done
This must be done This must be done
This must be done at the end of each day
at the end of each dayat the end of each day
at the end of each day
Do not interrupt program once started
T is program lasts approx. 2 minutes
Step 1
Open the programming door on the front
Step 2
Press this key
until you hear an acoustic signal.
Step 3
Place a container under the height-adjustable dual
spout
Step 5
Fill a container with approx. 400mls of water. Add
one and a half capfuls of JURA cappuccino
cleaning agent. Dip the two milk hoses into this
solution.
Step 6
Press this key
Step 7
You will hear an acoustic signal
Step 8
Fill a container with approx. 400mls of fresh water
and dip the milk hoses into it
Step 9
Press this key
Always dip bot milk oses into t e fluid
CLEANER FOR
CAPPUCCINO
PRESS
KEY
MACHINE
CLEANING
WATER FOR
CAPPUCCINO
PRESS
KEY
MACHINE
CLEAN
COFFEE
READY
Cleaning procedures for the Jura X9
CLEANING THE D AL SPO T
CLEANING THE D AL SPO TCLEANING THE D AL SPO T
CLEANING THE D AL SPO T
Do not interrupt program once started
T is program lasts approx. 20 minutes
You know t e dual spout needs cleaning w en
t e signals below appear
You can still draw off coffee or ot water and
start cleaning later
Step 1
Open the programming door
Step 2
Press this key until you hear an acoustic signal.
COFFEE READY
CLEAN
Step 3
Remove the tray and the grounds bin and EMPTY
the coffee grounds
Step 4
Place the grounds bin and the tray back into the
machine.
Step 5
Place a large container under the height-
adjustable dual spout
Step 6
Press this key
COFFEE BIN
MISSING
MACHINE
CLEANING
Step 7
You will hear an acoustic signal
Step 8
Drop a JURA cleaning tablet into the filler
funnel
Step 9
Press this key
ADD TABLET
PRESS
KEY
MACHINE
CLEANING
EMPTY
COFFEE BIN
WATER FOR
CAPPUCCINO
Cleaning procedures for the Jura X9
Step 10
Fill a container with approx. 400mls of fresh water
and dip the milk hoses into it
Step 11
You will hear an acoustic signal
.
Step 12
Remove the tray and the grounds bin and EMPTY
the coffee grounds.
PRESS KEY
MACHINE
CLEANING
EMPTY TRAY
EMPTY
COFFEE BIN
Step 13
Put the tray and grounds bin back in
COFFEE BIN
MISSING
COFFEE
READY
Cleaning procedures for the Jura X9
CLEANING THE COFFEE SYSTEM
CLEANING THE COFFEE SYSTEMCLEANING THE COFFEE SYSTEM
CLEANING THE COFFEE SYSTEM
Do not interrupt program once started
T is program lasts approx. 20 minutes
You know your mac ine needs cleaning w en
t e signals below appear
You can still draw off coffee or ot water and
start cleaning later.
Step 1
Open the programming door
Step 2
Press this key until you hear an acoustic signal.
COFFEE READY
CLEAN
Step 3
Remove the tray and the grounds bin and EMPTY
the coffee grounds
Step 4
Place the grounds bin and the tray back into the
machine.
Step 5
Place a large container under the height-adjustable
dual spout
Step 6
Press this key
.
EMPTY
TRAY
EMPTY COF
FEE
BIN
COFFEE BIN
MISSING
Step 7
You will hear an acoustic signal.
Step 8
Drop a JURA cleaning tablet into the filler
funnel.
Step 8
Press this key
You will hear an acoustic signal.
MACHINE
CLEANING
ADD TABLET
PRESS KEY
MACHINE
CLEANING
EMPTY
TRAY
EMPTY COFFEE
BIN
Cleaning procedures for the Jura X9
CLEANING THE COFFEE SYSTEM
CLEANING THE COFFEE SYSTEMCLEANING THE COFFEE SYSTEM
CLEANING THE COFFEE SYSTEM
–
––
– continued
continued continued
continued
Step 9
Remove the tray and the grounds bin and EMPTY
the coffee grounds.
Step 10
Place the grounds bin and the tray back into the
machine
.
T e cleaning program is now
complete
COFFEE
BIN
MISSING
COFFEE READY
Autres manuels pour IMPRESSA X9
5
Table des matières
Autres manuels Jura Cafetière
Jura
Jura ENA Micro 9 One Touch Manuel utilisateur
Jura
Jura IMPRESSA J9.4 One Touch TFT Manuel utilisateur
Jura
Jura IMPRESSA Z5 Manuel utilisateur
Jura
Jura Z6 Manuel utilisateur
Jura
Jura J90 Manuel utilisateur
Jura
Jura IMPRESSA XF50 Classic Manuel utilisateur
Jura
Jura Z10 Manuel utilisateur
Jura
Jura Professional fine foam frother Manuel utilisateur
Jura
Jura IMPRESSA XJ9 Professional Manuel utilisateur
Jura
Jura E6 Manuel utilisateur
Jura
Jura 735 Manuel utilisateur
Jura
Jura GIGA X3C Mode d’emploi
Jura
Jura IMPRESSA C50 Manuel utilisateur
Jura
Jura Impressa E Manuel utilisateur
Jura
Jura GIGA X8c Mode d’emploi
Jura
Jura IMPRESSA 601 Manuel utilisateur
Jura
Jura IMPRESSA XJ5 Professional Manuel utilisateur
Jura
Jura Impressa Xs9 OT Classic Guide de configuration
Jura
Jura IMPRESSA 5000 Manuel utilisateur
Jura
Jura ONO Manuel utilisateur
