Juniper STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING... Manuel utilisateur

Release 2008.2

JUNIPER NETWORKS STRM

TECHNICAL NOTE

CHANGING NETWORK SETTINGS

JUNE 2008

This document provides information on changing network settings for the Console

and non-Console systems when using Trustix or CentOS-4 operating systems in

your deployment including:

•Changing Network Settings in an All-in-One Console

•Changing the Network Settings of a Console in a Multi-System Deployment

•Changing the Network Settings of a Non-Console in a Multi-System

Deployment

Note: This Technical Note applies to systems running STRM 2008.2 and above.

Changing Network

Settings in an

All-in-One Console

You can change the network settings in your All-In-One system. An All-In-One

system has all STRM components, including the Administration Console, installed

on one system.

To change the settings on the STRM Console:

Note: You must have a local connection to your Console before executing the

script.

Step 1 Log in to the Console, as root.

Step 2 Enter the following command:

qchange_netsetup

The Configure STRM window appears.

Release 2008.2

Step 3 Using the up/down arrow keys to navigate the fields, change the necessary

parameters:

•Hostname — Specify a fully qualified domain name as the system hostname.

Note: If you change the hostname and you are using Offense Resolution, we

recommend you also update the Resolver Agent name, if a Resolver Agent is

assigned to the host.

•IP Address - Specify the IP address of the system.

•Netmask - Specify the network mask address for the system.

•Gateway - Specify the default gateway of the system.

•Primary DNS - Specify the primary DNS server.

•Secondary DNS - Optional. Specify the secondary DNS server.

•Public IP - Optional. Specify the Public IP address of the server. This is a

secondary IP address that is used to access the server, usually from a different

network or the Internet, and is managed by your network administrator. This

Public IP address is often configured using Network Address Translation (NAT)

services on your network or firewall settings on your network. NAT translates an

IP address in one network to a different IP address in another network.

•Email Server - Specify the email server. If you do not have an email server,

specify localhost in this field.

Step 4 Use the TAB key to navigate to the Finish option. Press Enter.

A series of messages appear as STRM processes the requested changes. After

the requested changes are processed, the STRM system is automatically

shutdown and rebooted.

Changing the

NetworkSettingsof

a Console in a

Multi-System

Deployment

To change the network settings in a multi-system deployment, you must remove all

non-Console managed hosts from the deployment, change the network settings,

re-add the managed host(s), and then re-assign the component(s).

You must perform this procedure in the following order:

•Removing Non-Console Managed Hosts

•Changing the Network Settings

•Re-Adding Managed Host(s) and Re-Assigning the Components

Note: This procedure requires you to use the Deployment Editor. For more

information on using the Deployment Editor, see the STRM Administration Guide.

Removing

Non-Console

Managed Hosts

To remove non-Console managed hosts from your deployment, you must:

Step 1 Log in to STRM:

https://<IP Address>

Release 2008.2

Changing the Network Settings of a Console in a Multi-System Deployment 3

Where <IP Address> is the IP address of the STRM system.

Username: admin

Password: <root password>

Where <root password> is the password assigned to STRM during the

installation process.

Step 2 In the main STRM Interface, click Config.

Step 3 Click the deployment editor icon.

Step 4 Click the System View tab.

Step 5 Select the managed host you wish to delete.

Step 6 Use the right mouse button (right-click) to access the menu, select Remove host.

Repeat for each non-Console managed host until all hosts are deleted.

Step 7 From the Administrative Console menu, select Configurations > Deploy

Configuration Changes.

Step 8 Exit from the Administration Console.

Note: If the Administration Console is still active on your system tray, use the

right-mouse button (right-click) to access the menu and select Exit.

Changes are deployed.

Changing the

Network Settings To change the network settings, you must:

Step 1 Log in to the Console as root.

Step 2 Enter the following command:

qchange_netsetup

The Network Settings window appears.

Step 3 Using the up/down arrow keys to navigate the fields, make the necessary changes

to the following parameters:

•Hostname — Specify a fully qualified domain name as the system hostname.

Note: If you change the hostname and you are using Offense Resolution, we

recommend you also update the Resolver Agent name, if a Resolver Agent is

assigned to the host.

•IP Address - Specify the IP address of the system.

•Netmask - Specify the network mask address for the system.

•Gateway - Specify the default gateway of the system.

•Primary DNS - Specify the primary DNS server.

•Secondary DNS - Optional. Specify the secondary DNS server.

•Public IP - Optional. Specify the Public IP address of the server. This is a

secondary IP address that is used to access the server, usually from a different

network or the Internet, and is managed by your network administrator. This

Release 2008.2

Public IP address is often configured using Network Address Translation (NAT)

services on your network or firewall settings on your network. NAT translates an

IP address in one network to a different IP address in another network.

•Email Server - Specify the email server. If you do not have an email server,

specify localhost in this field.

Step 4 Use the TAB key to move to the Finish option. Press Enter.

A series of messages appear as STRM processes the requested changes. After

the requested changes are processed, the STRM system is automatically

shutdown and rebooted.

Re-Adding Managed

Host(s) and

Re-Assigning the

Components

To re-add the managed host(s) and re-assign component(s), you must:

Step 1 Log in to STRM and access the System View in the Deployment Editor, as defined

in Step 1, Removing Non-Console Managed Hosts.

Re-add managed host(s) to your deployment.

Step 2 From the menu, select Actions > Add a managed host.

The Add a new host wizard appears.

Step 3 Click Next.

The Enter the host’s IP window appears.

Step 4 Enter values for the parameters:

•Enter the IP of the server or appliance to add — Specify the IP address of

the host you wish to add to your System View.

•Enter the root password of the host — Specify the root password for the

host.

•Confirm the root password of the host — Specify the password again, for

confirmation.

Step 5 Click Next.

Step 6 Click Finish.

Step 7 Re-assign all components to your non-Console managed host.

a In the STRM Deployment Editor, click the Flow View or Event View tab.

b Select the component you wish to re-assign to the managed host.

c From the menu, select Actions > Assign

Note: You can also use the right mouse button (right-click) to access the Actions

menu items.

The Assign Component wizard appears.

d From a Select a host drop-down list box, select the host you wish to re-assign

to this component. Click Next.

Release 2008.2

Changing the Network Settings of a Non-Console in a Multi-System Deployment 5

e Click Finish.

Step 8 Repeat for each non-Console managed host until all hosts are re-added and

re-assigned.

Step 9 From the Administrative Console menu, select Configurations > Deploy

Configuration Changes.

Changes are deployed.

Changing the

NetworkSettingsof

a Non-Console in a

Multi-System

Deployment

To change the network settings of a non-Console in a multi-system deployment,

you must remove all non-Console managed host from the deployment, change the

network settings, re-add the managed host, and then re-assign the component(s).

You must perform this procedure in the following order:

•Removing the Non-Console Managed Host

•Changing the Network Settings

•Re-Adding the Managed Host and Re-Assigning the Components

Note: This procedure requires you to use the Deployment Editor. For more

information on using the Deployment Editor, see the STRM Administration Guide.

Removing the

Non-Console

Managed Host

To remove non-Console managed host from your deployment, you must:

Step 1 Log in to STRM:

https://<IP Address>

Where <IP Address>is the IP address of the STRM system.

Username: admin

Password: <root password>

Where <root password> is the password assigned to STRM during the

installation process.

Step 2 In the main STRM Interface, click Config.

Step 3 In the main STRM Interface, click Config.

Step 4 Click the deployment editor icon.

Step 5 Click the System View tab.

Step 6 Select the managed host you wish to delete.

Step 7 Use the right mouse button (right-click) to access the menu, select Remove host.

Step 8 From the Administrative Console menu, select Configurations > Deploy

Configuration Changes.

Step 9 Exit from the Administration Console.

Release 2008.2

Note: If the Administration Console is still active on your system tray, use the

right-mouse button (right-click) to access the menu and select Exit.

Changes are deployed.

Changing the

Network Settings To change the network settings, you must:

Step 1 Log in to the non-Console as root.