Jung SCHUKO BT 1521S Series Manuel utilisateur
Table of Contents
1 Safety instructions.............................................................................................................3
2 Device components...........................................................................................................4
3 Intended use .....................................................................................................................4
4 Product characteristics......................................................................................................5
5 Operation ..........................................................................................................................6
6 Mounting and electrical connection...................................................................................6
7 Commissioning via app .....................................................................................................7
8 Resetting the device to the factory setting ........................................................................9
9 Technical data.................................................................................................................10
10 List of functions and parameters .....................................................................................11
11 Troubleshooting ..............................................................................................................17
12 Accessories.....................................................................................................................18
13 Conformity.......................................................................................................................18
14 Warranty..........................................................................................................................18
2 / 18
32405903 28.02.2023
J0082405903
JUNG HOME SCHUKO socket
1 Safety instructions
Serious injuries, fire or property damage possible. Please read and follow manual
fully.
Installation only by persons with appropriate electrotechnical knowledge and
experience in the following areas:
– The "5 safety rules" to be observed are: disconnect; secure against reconnec-
tion; determine that no voltage is present; ground and short-circuit; cover or
block off adjacent live parts
– Selection of suitable tools, measuring devices and, if necessary, personal pro-
tective equipment
– Evaluation of the measurement results
– Selection of the electrical installation material to ensure the shutdown condi-
tions
– IP protection ratings
– Installation of the electrical installation material
– Type of mains supply (TN system, IT system, TT system) and the resulting
connection requirements (classic earthing, protective earthing, necessary ad-
ditional measures, etc.)
Improper installation endangers your own life and the lives of users of the electrical
system and there is a risk of serious damage to property, e.g. through fire. You are at
risk of personal liability for personal injury and damage to property.
Contact an electrical fitter!
The device must not be used in connection with consumers that could lead to danger
to life or limb or damage to property, e.g. heaters or electrical machines.
The device must not be used for applications from the area of safety engineering,
such as emergency stop, emergency call, smoke extraction.
Danger of electric shock. If the device exhibits any visible damage, it must not be
used any longer. Immediately disconnect device from mains by switching off all asso-
ciated circuit breakers.
Danger of electric shock. Device is not suitable for disconnection from supply voltage
because mains potential even is applied on the load when the device is switched off.
Before carrying out work on the device or load, switch off all associated circuit break-
ers.
This manual is an integral part of the product, and must remain with the end cus-
tomer.
You can find more information on JUNG HOME at www.jung.de/JUNGHOME
JUNG HOME SCHUKO socket
3 / 18
32405903 28.02.2023
J0082405903
2 Device components
Image1: Device components
(1) Insert
(2) Design frame
(3) Cover
(4) Button with status LED
(5) Central screw
LED indication during operation
Green* Load is switched on
Orange* Load is switched off
Red Disabling function active, e.g. continuously ON/OFF
Blue, triple flashing Time is not set, e.g. due to an extended power failure
Flashing green/red Device update is being performed
Red, triple flashing Error message:
- Insert combined with wrong cover.
- Overcurrent switch-off, eliminate error and switch on
device again with button (4) (JUNG HOME SCHUKO socket
Energy).
* Colour adjustable
3 Intended use
– Manual or automatic switching of lighting and common household devices
– Power (W) and energy measurement (kWh) of connected devices, only JUNG
HOME SCHUKO socket Energy
– Wireless connection to devices from the JUNG HOME system
– Use inside in dry rooms
– Mounting in appliance box with dimensions according to DIN 49073
– Use an appliance box with an installation depth of min. 53 mm
JUNG HOME SCHUKO socket
4 / 18
32405903 28.02.2023
J0082405903
4 Product characteristics
– Commissioning and operation using JUNG HOME app on mobile end device
(smartphone or tablet) via Bluetooth
– Button for switching
– Multi-colour status indication with optional night mode
– Disabling local operation
– Up to 16 time programs
– Integration of the load into areas (groups), main functions and scenes
– Activating/deactivating automatic functions with the JUNG HOME app
– Automatic date and time update when connecting with smartphone
– Integrated switch actuator with 16 A
– Bluetooth SIG Mesh for fully encrypted wireless communication and repeater
function
– Updating via JUNG HOME app
Additionally for JUNG HOME SCHUKO socket Energy
– Power measurement of 0.1 to 3680 watts and energy measurement (kWh)
– Recording of the energy curve of the last 24 hours and last 31 days (charting)
– Operating hours counter, period of energy measurement
– Power-save function (switch-off of standby consumers)
– Master/slave function (switch on a wirelessly linked consumer depending on
the connected consumer)
– Overcurrent protection cut-off
Available by update in the future:
– Disabling function and restraint guidance: continuously ON/OFF or ON/OFF
for fixed time
– Time programs with sunrise and sunset (astro timer)
– Time programs with random time
– Supplied power of -0.1 to -3680 watts and supplied energy (kWh)
You can find information on updates and dates at www.jung.de/JUNGHOME
Behaviour after a mains voltage failure
All settings and time programs are retained. Missed switching times are not per-
formed later. The load output is switched off, provided the parameter "Switching state
after the mains voltage returns" is set to its default setting.
If the device was not previously added to a Bluetooth Mesh network (project) via the
JUNG HOME app, it switches for 2 minutes to coupling mode after the mains voltage
returns and the status LED flashes slowly at a regular interval in blue.
Mains voltage failure shorter than power reserve (min. 4 hours)
JUNG HOME SCHUKO socket
5 / 18
32405903 28.02.2023
J0082405903
– Time and date are up to date
– The following time programs are performed normally again
Mains voltage failure longer than power reserve (min. 4 hours)
– The LED flashes blue three times repeatedly until the time is automatically up-
dated when connected with the app
– The time programs are not executed as long as the time has not been set
– No recording of measurement data as long as the time is not set (JUNG
HOME SCHUKO socket Energy)
5 Operation
All settings and operations of the socket can be configured individually using the
JUNG HOME app.
Switching the socket alternately on and off
￭ Press button (4) for less than 4 seconds.
Wireless operation
Wireless operation is performed with linked JUNG HOME devices or via the JUNG
HOME App, which is also used to link the JUNG HOME devices (see 'Commissioning
via App').
6 Mounting and electrical connection
Communication between the JUNG HOME devices and linked mobile end devices is
performed wirelessly within the range of the Bluetooth Mesh network.
The range of wireless signals can be affected by:
– Number, thickness, position of ceilings, walls and other objects
– Material type of these objects
– High-frequency interfering signals
Observe the following fitting instructions to maximise the range:
– Plan the number of JUNG HOME devices and their positions to keep the num-
ber of ceilings and walls between two devices as low as possible
– If JUNG HOME devices are installed on both sides of a solid wall, they should
be positioned as close as possible to each other on the opposite sides of the
wall. This keeps the attenuation of the wireless signal through the wall as low
as possible.
– When planning, make sure that there are as few building materials and objects
as possible that strongly attenuate the wireless signal (e.g. concrete, glass,
metal, insulated walls, water tanks, pipes, mirrors, book cabinets, storage
rooms and refrigerators) on the connection line between JUNG HOME devices
JUNG HOME SCHUKO socket
6 / 18
32405903 28.02.2023
J0082405903
– Keep a distance of at least 1 m from devices that emit high-frequency signals
(e.g. microwave, motors) or use wireless signals at 2.4 GHz (e.g. WLAN
router, baby monitor, IP cameras, wireless loudspeakers etc.)
DANGER!
Electric shock when live parts are touched.
Electric shocks can be fatal.
Always disconnect before carrying out work on the device or load. For this, switch off
all corresponding circuit breakers, secure against being switched on again and check
that there is no voltage. Cover up adjacent live parts.
Image2: Connection
Image3: Clampable conductor cross-section
￭ Connect the socket (1) according to connection diagram (see figure 2). Ob-
serve the clampable conductor cross-sections (see figure 3).
￭ Install the socket in the appliance box. Observe the installation depth (see
chapter "Technical data" } Page 10).
￭ Mount the design frame (2) and cover (3) (see figure 1). Observe the correct
installation position. Otherwise the socket will not function.
Use Frame 28 mm structure height if you have an existing appliance box with
insufficient depth (see accessories)
7 Commissioning via app
Prerequisite: The JUNG HOME device does not yet belong to a Bluetooth Mesh net-
work. Otherwise reset the device to the default setting.
JUNG HOME SCHUKO socket
7 / 18
32405903 28.02.2023
J0082405903
If a Bluetooth Mesh network (project) does not yet exist, a new project must first be
created for the first JUNG HOME device in the JUNG HOME app.
If a Bluetooth Mesh network already exists, the project file for this network must be
opened in order to pair the new device.
After switching on the mains voltage, the device is automatically in pairing
mode for two minutes.
Image4: Commissioning
￭ Activate pairing mode manually:
Press the button (4) for more than four seconds.
The status LED (4) flashes slowly in blue. Pairing mode is active for
two minutes.
￭ Start the JUNG HOME app.
￭ The app shows all devices in pairing mode.
￭ Select a device in the app.
To identify the selected device, its status LED flashes more quickly in blue.
￭ Add the device to the project.
The status LED lights up in blue for five seconds to confirm that pairing was
successful.
JUNG HOME SCHUKO socket
8 / 18
32405903 28.02.2023
J0082405903
If the status LED flashes red very fast, pairing has failed and needs to be re-
tried.
The JUNG HOME app can then be used to link devices wirelessly and config-
ure the parameters and operation (see list of functions and parameters).
Once the commissioning of the JUNG HOME project has been completed,
hand over the project file to the owner.
Besides basic commissioning, the JUNG HOME app enables device updates and
convenient operation of further individual configuration options:
– Link: A button, binary input or motion sensor can be controlled by linking it to a
load (e.g. dimmer, socket, relay, shutter etc.). Several loads can be controlled
together by linking them to an area or scene.
– Area: Different loads (e.g. dimmer, socket, relay, shutter etc.) can be grouped
in an area to allow them to be controlled together.
– Scene: Different loads (e.g. dimmer, socket, relay, shutter etc.) can be
grouped in a scene so that, by calling up a scene, each load assumes the load
status stored in the scene.
– Automatic function: An automatic function can be used to control the locally
connected load (no wireless link) by means of time programs. Depending on
the device type, there are further automatic functions in JUNG HOME, such as
hotel function, night light function, holiday program or switching thresholds.
8 Resetting the device to the factory setting
If the button (4) is disabled with the operating lock parameter, the default set-
ting can be reset to only within two minutes after switching on the mains
voltage.
If the device has already been added to a project with the JUNG HOME app, it
can be deleted from the app with the "delete device" function and simultan-
eously reset to the default setting.
If the device cannot be reset to the default settings with the app, reset the device as
follows:
JUNG HOME SCHUKO socket
9 / 18
32405903 28.02.2023
J0082405903
Image5: Factory reset
￭ Press the button (4) for more than 20 seconds until the status LED quickly
flashes in red.
￭ Release the button (4) and press it briefly again within ten seconds.
The status LED flashes in red more slowly for approx. five seconds. The
device has been reset to the default setting.
After resetting the device to the default setting, it must be removed from the
JUNG HOME app provided it has not already been deleted from the app.
9 Technical data
Rated voltage AC 220 ... 250 V ~
Mains frequency 50 / 60 Hz
Standby power max. 0.25 W
Ambient temperature -5 ... +45 °C
Transport temperature -25 ... +70 °C
Storage temperature -5 ... +45 °C
Relative humidity 20 ... 70 % (no moisture condensation)
Accuracy per month ± 13 s
JUNG HOME SCHUKO socket
10 / 18
32405903 28.02.2023
J0082405903
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Jung Accessoires
Jung
Jung SCHUKO 1520-15 Series Manuel utilisateur
Jung
Jung FW180WW Manuel utilisateur
Jung
Jung 2072 TSM Manuel utilisateur
Jung
Jung 5232 Series Manuel utilisateur
Jung
Jung KNX WS 10 D Manuel utilisateur
Jung
Jung RW 95 Manuel utilisateur
Jung
Jung 65 WIS Manuel utilisateur
Jung
Jung BTS01 Manuel utilisateur
Jung
Jung UMA-CAT6A Manuel utilisateur
Jung
Jung TK AS AL 114 Manuel utilisateur
