JTS UT-16GT Manuel utilisateur
59508-024-04
UR-816D / UT-16GT
LIGHTER
SMALLER
MORE POWERFUL
Miniature
wireless system
Winds
Guitar
&
Instruction Manual
ank you for choosing the JTS wireless system. In order to obtain the best eciency from the system, you are
recommendedto readthisinstruction manualcarefully.
INDEX
1. Important Caution
2. Features
3. Specication
3-1 Receiver// UR-816D
3-2 Miniature Transmier // UT-16GT
4. Part Identication & Accessories
4-1 Receiver // UR-816D
4-2 Miniature Transmier // UT-16GT
4-3 Accessories
5. Preparing Procedures & Basic Operation
5-1 Receiver
5-2 Baery Insertion Of e Transmier
5-3 Install e Transmier
6. System Operation
7. Rack Mounting
8. Recommendation
9. Important Notice
1
1
2
2
2
3
3
4
5
6
6
7
8
10
11
12
13
1
MINIATURE MUSIC INSTRUMENT WIRELESS SYSTEM
Always make all connections before plugging the unit into an AC power outlet.
Do not leave the devices in a place with high temperature or high humidity.
Do not handle the power cord with wet hands!
Keep the devices away from re and heat sources.
Innovative combo design good for both guitar and winds
UHF PLL 16 channels
At least 60 meter operation distance
Tone Key Squelch
Higher signal to noise ratio
One AAA 1.5V baery runs for 8 hours
1. Important Caution
2. Features
UT-16GT provides true wireless experience to musicians. Within limited space it delivers uncompromised features.
2
3. Specication
3-1 Receiver// UR-816D
3-2 Miniature Transmitter// UT-16GT
Frequency Preparation.........................
Carrier Frequency Range...................
S/N Ratio......................................................
T.H.D................................................................
Display..............................................................
Display Contents......................................
Controls..........................................................
Audio Output Level...............................
AF Output Impedance.........................
Squelch............................................................
Operation Voltage...................................
Output Connector..................................
Dimension(m/m)...................................
PLL Synthesized Control
502~960 MHz
> 105dB
<0.6%@1KHz
LED
Antenna A/B, RF/AF Status
Power On/O, Channel Selecting, Audio Level
-12dB
600Ω
Pilot Tone, Noise and Mute
12-18 VDC, 200mA
1 Balanced XLR socket
1 Unbalanced Ø6.3mm phone jack
221mm (W)* 40mm (H)* 152mm (D)
Frequency Preparation.........................
Carrier Frequency Range...................
RF Outputs..................................................
Stability............................................................
Frequency Deviation.............................
LED Display................................................
Controls.........................................................
Spurious Emissions................................
Audio Frequency Response ............
Baery..............................................................
PLL Synthesized Control
502~960 MHz
Maximum 10mW
±10KHz
±48KHz
Power On/O, Low baery, Mute
Power On/O, AF Level, Channel Selecting, Mute
<-50 dBC
40~18,000 Hz
LR03, AAA 1.5V*1
3
MINIATURE MUSIC INSTRUMENT WIRELESS SYSTEM
4. Parts Identication & Accessories
4-1 Receiver// UR-816D
Antenna
Power On/O Switch
Power LED
Channel selector
RF indicator
AF indicator
Volume control
Front panel
Rear panel
Power Supply Jack (12-18V/200mA): for connecting the power supply unit.
Strain Relief: for the connection cable of the power supply unit, which leads the cable around the
hook to prevent accidental disconnection of the plug from the jack.
AF Output (6.3mm jack, unbalanced): for connection to a unbalance input,
e.g. of a mixer or amplier.
Balanced XLR Output: for connection to the balanced input, e.g.
of a mixer or an amplier.
Output Level Aenuation(-20dB): to aenuate the balanced XLR output level by -20dB.
1
2
3
4
5
6
7
11
12
8
9
10
89101112
0dB
-20dB
AF OUTPUT
OUTPUT
LEVEL
Freq.Range
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
DCV INPUT
12-18V/200mA
BALANCED
UNBALANCED
Made in Taiwan
1 1
2 3 4 5 6 7
4
4-2 Miniature Transmitter
UT-16GT
Power On/Mute/O switch
LED indicator for power On/O, baery status and mute
Channel selector
Input gain
Antenna
6.3GT plug: Jack plug
508GT: Winds microphone module (optional in some countries)
16GT Clip: Winds clip
Baery Lid (Color ID): Orange / White / Gray
1
2
3
4
5
6
7
8
9
10
7
8
9
10
1
2
3
4
5
6
5
MINIATURE MUSIC INSTRUMENT WIRELESS SYSTEM
4-3 Accessories
AC/DC adaptor
Switching Power Supply
(100~240V, 50~60Hz)
Linear Power Supply (220V , 50Hz)
Linear Power Supply (220V , 60Hz)
AF output cable
Screwdriver
Sucker Holder
DR-900 dual rack adaptor
RP-900 panel cover
Adhesive tape *2
Windscreen
A
A
B
B
C
C
/
(Place the adhesive tape as show in picture 1 & picture 2)
1 2 3
(Tear up the adhesive tape and position the windscreen as show in picture 3.)
Option
Option
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
6
5. Preparing Procedures & Basic Operation
5-1 Receiver
(1) Connect to the subsequent unit (e.g. mixer, or amplifier)
Connect one end of a proper AF cable to the AF Output or Balanced XLR Output socket, then plug
another end to the “MIC IN” input socket of a mixer or a amplier (Step 1)
(2) Connect the power supply unit
Plug in one end of AC/DC adaptor cable to Power Supply Jack in the rear panel of receiver, and plug
another end into an AC outlet (Step 2)
Caution
To prevent accidental disconnection of the plug from the jack, lead the cable around the hook of the strain
relief.
2
Autres manuels pour UT-16GT
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels JTS Équipement d'enregistrement
Manuels Équipement d'enregistrement populaires d'autres marques
Strymon
Strymon NIGHTSKY Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur
Tews Technologies
Tews Technologies TPMC465 Manuel utilisateur
Honeywell
Honeywell Excel 50 Manuel utilisateur
SeaLevel
SeaLevel COMM+8.LPCI Manuel utilisateur
Arturia
Arturia AUDIOFUSE STUDIO Manuel utilisateur
