JSI Bourne Manuel utilisateur
Installation Instructions
Package Contents
Page 1 of 3Bourne
Wood Table Assembly
#2 & #3 Phillips
Screw Driver
Recommended Tools
Top
Legs
(Qty. 2)
#2 & #3 Phillips
Head Bit
Screw Gun
Level
Wood Rails
(Qty. 2)
Hardware Used
Step 1
Assemble H-Frame
• Attach the four metal plates
to foot rails using 1/4-20 x 1/2 ”
flat head bolts.
• Insert Cross Bar into Side
Rail brackets and attach using
1/4-20 x 1/2 ”flat head bolts.
Metal Plates
(Qty. 4)
H-Frame Rails
& Cross Bar
(Qty. 3)
#10 x 1”Flat Head Screws
(Zinc or Black)
#8 x 1 3/4 ”Pan Head Screws
#10 x 1”Flat Head Screws
(Black)
1/4-20 x 1/2”Flat Head Bolts
#8 x 2 1/4 ”Pan Head Screws
H-Frame
Foot Rail
Metal Plate
1/4-20 x 1/2 ”Bolts
Cross Bar
Side Rail Bracket
1/4-20 x 1/2 ”
Bolts
Notice To Installers: Failure to comply with installation instructions will compromise the safety, durability and performance of this product, which may risk injury to the user of this
product and/or diminish the product life cycle. Jasper Group assumes no liability in these instances.
jsifurniture.com
800.457.4511
812.482.3204 O
812.482.1548 F
225 Clay Street / PO Box 231
Jasper, Indiana 47546
Form No. INST-BU003
5/1/16
Installation Instructions
Page 2 of 3Bourne
Step 3
Position Legs in Place on Top
• Flip top upside down and lay on a flat
smooth surface.
• Position Legs on the Top. Align holes
in leg plates to pre-bored holes in Top
as shown.
Step 4
Position Wood Rails in
Place Between Legs
• Slide Wood Rails into slots in Legs as
shown below.
• DO NOT fasten to Legs down at this point.
Wood Table Assembly
(continued)
Wood Legs
Step 5
Attached H-Frame to Legs
• Fasten Metal Rails to Legs using
#10 x 1”flat head screws. Screws
will either be zinc or black pending
color of H-Frame.
Step 6
Fasten Legs to Top
• Align holes in leg plates to pre-bored
holes in Top.
• Fasten all four Legs to Top using
#10 x 1”flat head screws.
#10 x 1 ”flat head
(Color to match H-Frame)
#10 x 1 ”flat head
(Black)
Notice To Installers: Failure to comply with installation instructions will compromise the safety, durability and performance of this product, which may risk injury to the user of this
product and/or diminish the product life cycle. Jasper Group assumes no liability in these instances.
jsifurniture.com
800.457.4511
812.482.3204 O
812.482.1548 F
225 Clay Street / PO Box 231
Jasper, Indiana 47546
Form No. INST-BU003
5/1/16
Installation Instructions
Page 3 of 3Bourne
Wood Table Assembly
(continued)
Step 8
Fasten Wood Rails to Legs
• Attach Wood Rails to Legs using
#8 x 2 1/4”pan head screws.
Step 7
Fasten Wood Rails to Top
• Attach Wood Rails to Top using
#8 x 1 3/4”pan head screws.
Step 9
Level Table
• Carefully flip table upright.
• Level table front-to-back and side-to-side
by rotating adjustable glides.
#8 x 1 3/4”pan head #8 x 2 1/4”pan head
Notice To Installers: Failure to comply with installation instructions will compromise the safety, durability and performance of this product, which may risk injury to the user of this
product and/or diminish the product life cycle. Jasper Group assumes no liability in these instances.
jsifurniture.com
800.457.4511
812.482.3204 O
812.482.1548 F
225 Clay Street / PO Box 231
Jasper, Indiana 47546
Form No. INST-BU003
5/1/16
Table des matières
Autres manuels JSI Mobilier d'intérieur
JSI
JSI CAAV Manuel utilisateur
JSI
JSI CAAV Manuel utilisateur
JSI
JSI CAAV Manuel utilisateur
JSI
JSI CAAV Manuel utilisateur
JSI
JSI Vision-Desk ADJUSTABLE HEIGHT Guide de configuration
JSI
JSI SWISH Side Access Storage Manuel utilisateur
JSI
JSI Vision-Wall Mounted Floating Shelf Manuel utilisateur
JSI
JSI CAAV Manuel utilisateur
JSI
JSI Flux Series Manuel utilisateur
JSI
JSI Flux Manuel utilisateur
JSI
JSI Reef Manuel utilisateur
JSI
JSI FLUX OPEN PLAN Mode d’emploi
JSI
JSI Bourne Manuel utilisateur
JSI
JSI Flux Manuel utilisateur
JSI
JSI Just Stack It Manuel utilisateur
JSI
JSI CAAV Manuel utilisateur
JSI
JSI SWISH Casegood Desk Manuel utilisateur
JSI
JSI Reef Manuel utilisateur
JSI
JSI Moto Manuel utilisateur
JSI
JSI SWISH Manuel utilisateur
