JS Technik LS-iP5A Manuel utilisateur

User Manual

Frequency - Inverter LS-iP5A

2.2KW - 450kW

All work for connection, commissioning and regular maintenance must be

carried out by qualified, responsible specialists.

JS-Technik GmbH - Lether Gerwerbestrasse 10 - 26197 GroßenknetenJS-Technik www.js-technik.de

Right choice for ultimate yield

LSIS strives to maximize customers' profit in gratitude of choosing us for your

partner.

SV-iP5A User Manual

5.5-30 kW [200V] / 2.2-450kW [400V]

Read this manual carefully before

installing, wiring, operating, servicing

or inspecting this equipment.

zKeep this manual within easy reach

for quick reference.

Thank you for purchasing LS Variable Frequency Drives!

SAFETY INSTRUCTIONS

To prevent injury and property damage, follow these instructions

during the installation and operation of the inverter.

Incorrect operation due to ignoring these instructions may cause

harm ordamage. The following symbols are used throughout the

manual to highlight important information.

DANGER

WARNING

CAUTION

This symbol indicates the possibility of

death or serious in

This symbol indicates the possibility of

damage to the inverter or other

com

onents.

This symbol indicates death or serious

injury can occur if you do not follow

instructions.

■The meaning of each symbol in this manual and on your

equipment is as follows.

This is the safety alert symbol.

Read and follow instructions carefull

to avoid a dan

erous situation.

This symbol alerts the user to the presence of “dangerous voltage”

inside the product that might cause bodily harm or electric shock.

■This manual should be placed in a location where it can be

accessed by users.

■This manual should be given to the person who actually

uses the inverter and is responsible for its maintenance.

WARNING

Do not remove the cover while power is applied or the unit is in

operation.

Otherwise, electric shock could occur.

Do not operate the inverter with the front cover removed.

Otherwise, electric shock can occur due to the exposed terminals and bus bars.

Do not remove the cover except for periodic inspections or wiring,

even if the input power is not applied.

Otherwise, electric shock can occur due to accessing capacitor banks.

Wiring and periodic inspections should be performed at least 10

minutes after disconnecting the input power and after checking the DC

link voltage is discharged with a meter (below 30VDC).

Otherwise, electric shock could occur.

Operate the switches with dry hands.

Otherwise, electric shock could occur.

Do not use the cable when its insulating tube is damaged.

Otherwise, electric shock could occur.

Do not subject the cables to scratches, excessive stress, heavy loads

or pinching.

Otherwise, electric shock could occur.

CAUTION

Install the inverter on a non-flammable surface. Do not place flammable

materials nearby.

Otherwise, fire could occur.

Disconnect the input power if the inverter has been damaged.

Otherwise, it could result in a secondary accident and fire.

Do not touch the inverter after shutting down or disconnecting it. It will

remain hot for a couple of minutes.

Otherwise, bodily injuries such as skin-burn or damage could occur.

Do not apply power to a damaged inverter or to an inverter with parts

missing even if the installation is complete.

Otherwise, electric shock could occur.

iii

Do not allow lint, paper, wood chips, dust, metallic chips or other

foreign material into the drive.

Otherwise, fire or accident could occur.

OPERATING PRECAUTIONS

(1) Handling and installation

The iP5A series inverter can be heavy. Lift according to the weight of the product. Use a

hoist or crane to move and install the iP5A series inverter if necessary. Failure to do so

may result in personal injury or damage to the inverter.

Do not stack the inverter boxes higher than the number recommended.

Install the inverter according to instructions specified in this manual.

Do not open the cover during delivery.

Do not place heavy items on the inverter.

Check that the inverter mounting orientation is correct.

Do not drop the inverter, or subject it to hard impact.

Verify the ground impedance 100ohm or less for 230 V Class inverters and 10ohm or less

for 460V class inverters.

Take protective measures against ESD (Electrostatic Discharge) before touching the pcb

boards during inspection, installation or repair.

The inverter is designed for use under the following environmental conditions:

Environment

Ambient

temp. - 10 ~ 40 ℃(14℉~ 104℉)

Relative

humidity 90% Relative Humidity or less (non-condensing)

Storage

temp. - 20 ~ 65 ℃(-4℉~ 149℉)

Location Protected from corrosive gas, combustible gas, oil mist

or dust (Pollution Degree 2 Environment)

Altitude,

Vibration Max. 1,000m (3,300ft) above sea level, Max. 5.9m/sec2

(0.6G) or less

Atmospheric

pressure 70 ~ 106 kPa (20.67 in Hg ~ 31.3 in Hg)

(2) Wiring

Do not connect power factor correction capacitors, surge suppressors, or RFI filter to the

output of the inverter.

The connection orientation of the motor output cables U, V, W will affect the direction of

rotation of the motor. Verify correct wiring before starting inverter.

Incorrect terminal wiring could result in inverter and/or equipment damage.

Reversing the polarity (+/-) of the terminals could damage the inverter.

Only authorized personnel familiar with LS inverter should perform wiring and inspections.

Always install the inverter before wiring. Otherwise, electric shock or bodily injury can occur.

(3) Trial run

Check all parameters during operation. Parameter values might require adjustment

depending on the application.

Always apply voltage within the permissible range of each terminal as indicated in this

manual. Otherwise, inverter damage may result.

(4) Operation precautions

When the Auto restart function is selected, the inverter will restart after a fault has occurred.

The Stop key on the keypad can only be used to stop the inverter when keypad control is

enabled. Install a separate emergency stop switch if necessary.

If a fault reset is made with the run command and /or reference signal present, a sudden

start will occur. Check that the run command and /or reference signal is turned off in

advance of resetting any faults. Otherwise an accident could occur.

Do not modify the inverter.

Depending on the motor specifications and user ETH overload settings, the motor may not

be protected by electronic thermal function of inverter.

The operation of the inverter is intended to be controlled by either keypad command or

control input signals. Do not use a magnetic contactor or any other device that routinely

disconnects the inverter and reconnects the inverter to the input supply power for the

purpose of starting and stopping the motor.

A noise filter may be installed to reduce the effect of electromagnetic interference.

Otherwise nearby electronic equipment may be affected.

In cases with input voltage unbalances, install an AC input reactor.

Power Factor capacitors and generators may become overheated and damaged due to

harmonics created by the inverter.

Use an insulation-rectified motor or take measures to suppress the micro surge voltage

when driving 460V class motor with inverter. A micro surge voltage attributable to wiring

constant is generated at motor terminals, and may deteriorate insulation and damage

motor.

Before operating unit and prior to user programming, reset user parameters to default

settings.

The Inverter can be set to operate a motor at high-speeds. Verify the speed capability of

motor and machinery prior to operating inverter.

Holding torque is not produced when using the DC-Brake function. Install separate

equipment when holding torque is required.

(5) Fault prevention precautions

If required, provide a safety backup such as an emergency mechanical brake to prevent

any hazardous conditions if the inverter fails during operation.

(6) Maintenance, inspection and parts replacement

Do not megger (hi-pot or insulation resistance) test the power or control circuit of the

inverter.

Refer to Chapter 8 for periodic inspection and parts replacement details.

(7) Disposal

Handle the inverter as an industrial waste when disposing of it.

(8) General instructions

Many of the diagrams and drawings in this instruction manual show the inverter without a cover. Prior

to operating the unit, be sure to restore covers and circuit protection according to specifications.

Table of Contents

CHAPTER 1 - BASIC INFORMATION .................................................................................................. 1-1

1.1 INSPECTION .............................................................................................................................................. 1-1

1.2 BASIC CONFIGURATION ........................................................................................................................... 1-2

CHAPTER 2 - SPECIFICATION ............................................................................................................. 2-1

2.1 200~230V CLASS (5.5~30KW/7.5~40HP).............................................................................................. 2-1

2.2 380~480V CLASS (5.5~30KW/7.5~40HP).............................................................................................. 2-1

2.3 380 ~480V CLASS (37~90KW/50~125HP) ............................................................................................ 2-2

2.4 380 ~480V CLASS (110~450KW/150~600HP) ...................................................................................... 2-2

2.5 DIMENSIONS.............................................................................................................................................. 2-5

CHAPTER 3 - INSTALLATION .............................................................................................................. 3-1

3.1 INSTALLATION PRECAUTIONS ................................................................................................................. 3-1

3.2 WIRING ..................................................................................................................................................... 3-3

CHAPTER 4 - OPERATION..................................................................................................................... 4-1

4.1 PROGRAMMING KEYPADS ....................................................................................................................... 4-1

1.1 SET............................................................................................................................................................ 4-2

4.2 OPERATING EXAMPLE ............................................................................................................................. 4-6

4.3 VARIOUS FUNCTION SETTING &DESCRIPTION.................................................................................... 4-11

4.4 OPERATION EXAMPLE ........................................................................................................................... 4-17

CHAPTER 5 - PARAMETER LIST ......................................................................................................... 5-1

5.1 PARAMETER GROUPS ............................................................................................................................... 5-1

5.2 PARAMETER LIST ..................................................................................................................................... 5-2

CHAPTER 6 - PARAMETER DESCRIPTION....................................................................................... 6-1

6.1 DRIVE GROUP [DRV] ............................................................................................................................... 6-1

6.2 FUNCTION 1GROUP [FU1] .................................................................................................................... 6-10

6.3 FUNCTION 2GROUP [FU2] .................................................................................................................... 6-24

6.4 INPUT/OUTPUT GROUP [I/O] ................................................................................................................. 6-37

6.5 APPLICATION GROUP [APP] .................................................................................................................. 6-56

CHAPTER 7 - TROUBLESHOOTING & MAINTENANCE................................................................ 7-1

7.1 FAULT DISPLAY........................................................................................................................................ 7-1

FAULT REMEDY.............................................................................................................................................. 7-3

7.2 TROUBLESHOOTING ................................................................................................................................. 7-5

7.3 HOW TO CHECK POWER COMPONENTS ................................................................................................. 7-6

7.4 MAINTENANCE ......................................................................................................................................... 7-8

CHAPTER 8 - OPTIONS ........................................................................................................................... 8-1

8.1 OPTION LIST ............................................................................................................................................. 8-1

8.2 EXTERNAL OPTIONS ................................................................................................................................. 8-2

CHAPTER 9 - RS485 COMMUNICATION ............................................................................................ 9-1

9.1 INTRODUCTION......................................................................................................................................... 9-1

9.2 SPECIFICATION......................................................................................................................................... 9-2

9.3 OPERATION............................................................................................................................................... 9-3

9.4 COMMUNICATION PROTOCOL (RS485) .................................................................................................. 9-4

9.5 PARAMETER CODE LIST ........................................................................................................................... 9-8

9.6 TROUBLESHOOTING ............................................................................................................................... 9-12

9.7 ASCII CODE LIST................................................................................................................................... 9-14

APPENDIX A- UL MARKING ........................................................................................................................... I

APPENDIX B- PERIPHERAL DEVICES....................................................................................................... IV

APPENDIX C- RELATED PARAMETERS ................................................................................................... VI

DECLARATION OF CONFORMITY ...........................................................................................................VII

EMI /RFI POWER LINE FILTERS ............................................................................................................. IX

1-1

CHAPTER 1 - BASIC INFORMATION

1.1 Inspection

- Remove the inverter from its packing and inspect its exterior for shipping damage. If damage is apparent

notify the shipping agent and your LSIS sales representative.

- Remove the cover and inspect the inverter for any apparent damage or foreign objects. Ensure that all

mounting hardware and terminal connection hardware is properly seated, securely fastened, and

undamaged.

- Check the nameplate on the iP5A inverter. Verify that the inverter unit is the correct horsepower and input

voltage for the application.

1.1.1 Inverter model number

The numbering system of the inverter is as shown below.

SV 055 iP5A – 2 NE

Motor rating N: No Keypad

O: UL Open Type

E: UL Enclosed Type 1

L: Built-in DC Choke

055 5.5kW

900 90kW

Series Name Input Voltage

iP5A 2 200 - 230V

4 380 - 480V

1.1.2 Installation

To operate the inverter reliably, install the inverter in a proper place with the correct direction and with the

proper clearances.

1.1.3 Wiring

Connect the power supply, motor and operation signals (control signals) to the terminal block. Note that

incorrect connection may damage the inverter and peripheral devices.

Chapter 1 – Basic Information

1-2

1.2 Basic configuration

The following devices are required to operate the inverter. Proper peripheral devices must be selected and

correct connections made to ensure proper operation. An incorrectly applied or installed inverter can result in

system malfunction or reduction in product life as well as component damage. You must read and understand

this manual thoroughly before proceeding.

AC Source Supply

Use a power source with a voltage within the

permissible range of inverter input power

rating.

MCCB or Earth

leakage circuit

breaker (ELB)

Select circuit breakers or fuses in accordance

with applicable national and local codes.

Inline Magnetic

Contactor

Install if necessary. When installed, do not

use it for the purpose of starting or stopping

the drive.

AC Reactor

An AC reactor can be used when the

harmonics are to be reduced and power

factor is to be improved. One must be used

when the inverter is installed on a power

source with greater than 10 times the KVA

rating of the drive.

Installation and

wiring

To reliably operate the drive, install the

inverter in the proper orientation and with

proper clearances. Incorrect terminal wiring

could result in the equipment damage.

DC Reactor

A DC reactor may be used together with or

in place of an AC reactor if necessary to

reduce harmonics or improve power factor.

To motor

Do not connect power factor capacitors,

surge arrestors or radio noise filters to the

output side of the inverter.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels JS Technik Onduleur

JS Technik

JS Technik LS-iC5 Manuel utilisateur

Manuels Onduleur populaires d'autres marques

Fourgroup

Fourgroup Easy Manuel utilisateur

Velleman

Velleman PI300M Manuel utilisateur

Sungrow

Sungrow SG350HX-US Manuel utilisateur

WilTec

WilTec 61897 Manuel utilisateur

SMA

SMA SUNNY BOY STORAGE 2.5 Manuel utilisateur

Simplicity

Simplicity LANDLORD 316 Manuel utilisateur

Santak

Santak SMAX 3000 Manuel utilisateur

ATON

ATON RA.Store-3 Manuel utilisateur

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manuel utilisateur

Tektronix

Tektronix CFG250 Manuel utilisateur

Champion

Champion 200989 Manuel utilisateur

Vanner

Vanner 20-500 Series Manuel utilisateur

GE GEP Manuel utilisateur

Astrel Group

Astrel Group Power Reducer Guide rapide

MULTIQUIP

MULTIQUIP GDP-5H Mode d’emploi

GoWISE

GoWISE PS1007 Manuel utilisateur

Promate

Promate PM13500D ES Manuel utilisateur

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manuel utilisateur