JMV Video Surveillance System Manuel utilisateur
JMV Video Surveillance
User Manual
Shenzhen Jim Video Technology Co., Ltd.
All right reserved
July 9th,2009
Ver：01.01.04
Note
Thank you for buying our product.
Before using this surveillance system, please read the user manual carefully to familiar with
their functions. Otherwise, we will not responsible for any consequence.
This User Manual will tell you the installation, operation, setting and networking of Jimvise
Surveillance system in detail.
The host’s working voltage is 220 volts (10% more or less). Thus, in the bad situation, to
insure the normal work of system, please use uninterruptible power system (UPS).
When install or remove the DVR card, please be sure that the electricity is cut off, and the
mainboard is completely de-energized.
D1 and CIF resolution can be switched, but after setting in the resolution, it can only work
after you close and open the channel again.
The working temperature is from -10±3℃to 55±2℃, and the environment should be clean
and well-ventilated.
We have patent on this software. Copy is not allowed without our consent. For the copy
software, we are not responsible for the stable and will affix the responsibility through relevant
legal.
Features（H.264 Compression）
¾Compression：H.264/MPEG 4；
¾Display resolution：1024×768、1280×1024、16:9 widescreen、16:10 widescreen；
¾Preview resolution(adjustable) ：704×576（PAL），740×480（NTSC）；
352×288（PAL），370×240（NTSC）；
¾Video resolution：704×576（PAL）， 740×480（NTSC）；
352×288（PAL），370×240（NTSC）；
¾One PC can install multiple cards and have up to 12 channels full D1 or 48 channels full CIF
¾Support one to 36 picture display in one screen, full screen display, auto flip
¾Display/Record/Playback multi-channels in one screen; Support multiple PTZ control and alarm
boxes to realize linkage alarm
¾Various recording modes: continuous recording, scheduled recording and motion triggered
recording
¾Each camera’s name can be set as you like
¾Support video source in PAL and NTSC format. 25fps for PAL format to realize real time record and
playback
¾Video images adjustment make the image more clearly
¾Multi levels of quality available. Higher level provides clear images and bigger files.
¾Motion alarm record and sound alarm output, adjustable alarm record sensitivity, adjustable time for
scheduled record and delay record
¾Intelligent retrieval, user can select playback files according to its Date, Channel, and Recording
mode. The system will auto list all the eligible files that matches users specifications.
¾With functions of local amplifier and playback by frame; user can choose the display mode: rapid,
slow or regular
¾The user can snapshot, backup and edit the playing file
¾Support remote Surveillance, remote control the lens, color, manual record, and computer restart
¾One PC can install multi hard disks with the maximum capacity
¾The hard disk can be fully used trough the maximum and minimum setting
¾Automatically create the log file (user operation log, system log, remote control log)to facilitate query
operation
¾User can set the system shutdown and restart time arbitrarily
¾The surveillance system can be set to automatically start each time windows starts-up and
shutdown when power off. When power on, the system will restart and recover video automatically.
¾Reliable hardware and stable software
¾Low hardware requirements, 48 channel’s recording occupy only 75% CPU
¾System can effectively prevent system brush caused by repeated operation
Contents
CHAPTER 1 SOFTWARE INSTALLATION.....................................................................................6
1.1 System Requirements .................................................................................................................................. 6
1.1.1 Hardware Requirements ................................................................................................................... 6
1.1.2 Software Requirements..................................................................................................................... 6
1.2 Software Installation.................................................................................................................................... 6
1.3 Software Uninstallation............................................................................................................................... 8
PART TWO SOFTWARE INTRODUCTION.....................................................................................9
2.1 Enter Program.............................................................................................................................................. 9
2.2 Software Main Interface Introduction........................................................................................................ 10
2.2.1 JMV iSee Integrated Monitoring System Main Interface............................................................... 10
2.2.2 Main Interface Button Function Introduction................................................................................. 11
2.3 Software Setting ........................................................................................................................................ 15
2.3.1 Basic Setting................................................................................................................................... 16
2.3.2 Record Setting ................................................................................................................................ 18
2.3.3 Video & Audio Setting.................................................................................................................... 19
2.3.4 PTZ Setting..................................................................................................................................... 20
2.3.5 Alarm Setting.................................................................................................................................. 22
2.3.6 Color Setting................................................................................................................................... 23
2.3.7 Motion Detection............................................................................................................................ 24
2.3.8 Privacy masking.............................................................................................................................. 25
2.3.9 Display Setting................................................................................................................................ 26
2.3.10 Storage setting............................................................................................................................... 27
2.3.11 System setting............................................................................................................................... 28
2.3.12 Network setting............................................................................................................................. 29
CHAPTER 3 PLAYBACK...........................................................................................................36
CHAPTER 4 TECHNICAL PARAMETERS....................................................................................38
Appendix I: The Recommendation for DVR Card............................................................................41
Ⅰ. 4CH/8CH/12CH Full CIF Realtime .......................................................................................................... 41
Ⅱ. 4CH/8CH/12CH Full D1 Realtime............................................................................................................ 41
Ⅲ. 16CH/24CH/32CH/48CH Full CIF Realtime............................................................................................ 42
Hardware ................................................................................................................................................. 42
Software................................................................................................................................................... 43
Appendix II: List of Recommended Motherboard.............................................................................43
CHAPTER 1 SOFTWARE INSTALLATION
1.1 System Requirements
1.1.1 Hardware Requirements
Motherboard Intel G31/G35 chipsets，2 or more PCI-EXPRESS slots
CPU Intel Core E4300 （Core(TM)2 E5200 is recommended）
Memory 512M（Recommended dual memory）
Display card Integrated graphics card
Network 10/100M
Resolution 1024*768，1280*1024，support widescreen
1.1.2 Software Requirements
Operation system：Windows 2000/Windows XP/Windows Vista
1、Recommended operation system: Microsoft Windows XP Professional sp3
2、Install DirectX 9.0 or above
3、Use the latest card driver
4、Please do not install a firewall, antivirus software or other applications on the host which install
the DVR software. (Firewall, including system firewalls can cause remote access connection failure;
antivirus software occupy the system resource, thus may affect the stability of DVR software;
please don't run other applications when DVR software running.)
Note: To insure the normal work of DVR please install motherboard driver before the installation of
video driver.
1.2 Software Installation
1) Double-click Setup.exe to start the installation, fig 1：
Fig 1
2) Click“OK”，then according to the installation guide, click“Next”until finish
3) If the system is not installed video playback software, please install the “video decoder ”
4) When you install the “JMV iSee Integrated Surveillance system”,(fig 2)Click“Continue
Anyway”，then according to the installation guide, click“Next”until finish
Fig 2
5) “JMV iSee integrated surveillance system” successfully installed(fig 3)
Fig 3
1.3 Software Uninstallation
1）Mode 1：Click Start > Procedures-> iSee ->Uninstallation, Uninstall the software will delete the related
documents, but keep DVR video files and folders.
2）Mode 2：Open “control panel”,then double-click “”to find “iSee DVR”,click
“cancel”on the lower right corner, then according to the installation guide, click“Next”until finish
PART TWO SOFTWARE INTRODUCTION
2.1 Enter Program
After installing the “JMV iSee Integrated Surveillance System”, double-click the icon “ ” on
Windows desktop or click Start->Program->Jim Video Tech, Ltd-> iSee-> iSee to open "JMV iSee
Integrated Surveillance System” preview screen, no need to input password.
Fig 4
All buttons are locked after entering the main interface of “JMV iSee Integrated Surveillance
System”, click “”or any other button, a window will show as fig 5
Fig 5
Click “Y”, and a window will show as fig 6, and then input admin into User name and Password.
Fig 6
After login successfully, enter “User Setting”, add new user name, and do “Authority Setting” to
protect some common users to change the settings. Administrator has authority to create, delete and
manage new users. See detailed information in “Authority Setting”
Note: System administrator name: admin, password: admin.
2.2 Software Main Interface Introduction
2.2.1 JMV iSee Integrated Monitoring System Main Interface
Before running “JMV iSee Integrated Monitoring System”, make sure your computer display 32-bit
true color resolution, resolution ration 1024*768 or 1280*1024.
(It is recommended to use 1280*1024 for a display larger than 17” as it will be larger and clearer
when browsing)
Table des matières
Manuels Système de sécurité populaires d'autres marques
EDM
EDM Solution 6+6 Wireless-AE Manuel utilisateur
Highway Safety Group
Highway Safety Group EA401 Manuel utilisateur
Siren
Siren LED GSM Manuel utilisateur
Detection Systems
Detection Systems 7090i Instructions de montage
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuel utilisateur
Siemens
Siemens FDM273 Manuel utilisateur