JK Audio BluePack Manuel utilisateur
JK Audio
BluePack™
Wireless interview tool
User Guide
ii BluePack Wireless Interview Tool
Welcome
Thank You
Thank you for purchasing the
JK Audio BluePack. Please read this
guide for instructions on using it.
Getting Assistance
If you have technical or application
questions:
In the US & Canada, call us toll free
at: 800-552-8346
All other countries dial: 815-786-2929
(M-F 8:30-5:00pm Central Time Zone)
Or, check out our FAQ section for
answers to common questions.
Limited Warranty
BluePack is covered by a 2 year
warranty to be free from defective
workmanship and materials. To obtain
service, contact JK Audio by phone
or email for return authorization.
Once authorized, you will carefully
pack and ship the faulty product and
all accessories to us. You will pay
for shipping to us and we will pay for
return back to you.
This warranty does not cover
damages due to accident, weather,
re, ood, earthquake, misuse,
unauthorized repairs or modications,
or damages occurred in shipping, only
defective workmanship or materials.
There are no expressed or implied
warranties which extend beyond
the warranty here made.
Overview iii
Safety Precautions
Caution, Avoid Listening at High Volume Levels
for Long Periods
Outerloop 3.5 contains a headphone amplier that is more powerful
than the typical consumer product.
JK Audio products are designed for the broadcast industry. The
broadcast professional must be able to hear headphone signals over
the ambient noise level. From the cheering crowd at a football game
to trackside at a car race, the program material or cues must be heard
at high volumes without distortion.
Road Safety
Never use headphones while driving or cycling, etc. It can be
dangerous to turn up the volume even while walking. Doing so may
hinder your hearing and can be hazardous on the roadways or at
pedestrian crossings.
Handle with Care
While Outerloop 3.5 was designed to be very rugged and durable,
it is not waterproof and care should be taken to keep the unit dry.
iv BluePack Wireless Interview Tool
Overview vi
Applications 1
Controls & Indicators 2
Getting Connected 4
Bluetooth Wireless Technology
7Bluetooth Status LED
8Pairing
9Master or Headset Mode
10 Connection History, Disconnecting from a Device, Reconnecting to a Device
6
FAQs 11
Technical Information 14
Contents v
Contents
HD Voice*
Bluetooth Wireless Technology
XLR Mic Input
3.5 Mm Stereo Line Input and Output
¼" Stereo Headphone Jack
>10 Hours on one 9 Volt Alkaline Battery
Features
HD Voice
While standard phone calls have a narrow bandwidth of 300 Hz to 3.4 kHz, HD Voice calls
oer 50 Hz to 7 kHz bandwidth. The additional 1.5 octaves on the low end gives voice a
more natural sound, while the additional upper octave dramatically improves speech clarity
and intelligibility.
Wireless HD Calls
To take advantage of this extended bandwidth, both phones on the call must support HD
Voice, and both phones must be on the same carrier, in coverage areas that support HD
Voice.
vi BluePack Wireless Interview Tool
Truly Mobile Field Reporting
BluePack allows live reporter
on-the-street interviews through
a phone or tablet using Bluetooth
Wireless Technology. Simply pair to
your mobile device like a Bluetooth
wireless headset. This sleek belt pack
provides a professional look and feel to
eld reporters and remote talent.
The professional microphone preamp
and powerful headphone amplier
make sure the message gets through.
A 3.5 mm stereo line input jack
allows recordings to be mixed into
the broadcast. The 3.5 mm stereo
line output jack provides your full
bandwidth microphone signal on the
left channel and Bluetooth return
audio on the right channel. This allows
you to make a full bandwidth backup
recording using your favorite recorder.
The stereo headphone output gives
you a mix of the XLR microphone
input, 3.5mm input, and Bluetooth
audio. This powerful ½ watt stereo
headphone amplier will cut through
any crowd noise.
BluePack features HD Voice
technology, allowing 7 kHz Wide Band
Speech phone calls when used with
compatible phones on compatible
networks, or when using wide band
voice codec apps. Read our HD Voice
primer for more details.
Overview
Applications 1
Applications
Record Better Audio for Video
Wirelessly connect any dynamic
microphone to your smartphone and
record broadcast-worthy interviews
while adding professionalism by
placing a real microphone in the
subject's hand.
While a smartphone's built-in mic picks
up every sound in the area, BluePack
isolates the audio you want and allows
Bluetooth audio recording directly into
your smartphone or tablet using your
existing professional dynamic mic.
1. Plug your mic and headphones
into BluePack.
2. Pair BluePack to a cell phone.
3. Enable the Bluetooth-Mic input
in the in-app settings and start
recording.
Your built-in camera app may
not currently support a Bluetooth
microphone.The following video
recording apps support a Bluetooth
microphone input.
Compatible Apps
Cinema FV-5
FILMIC PRO
LU-Smart
Movie Pro
These are the only apps available at the time of
this publication. Please check our web site for
an updated list.
During playback, your smartphone
may attempt to play audio through
BluePack as if it were a headset.
Disable the Bluetooth-Mic input if
you don't hear audio playing from
the speakers or headphones on your
phone during playback.
2BluePack Wireless Interview Tool
Controls & Indicators
2. Peak Indicator
The peak LED indicates clipping
on the input channel if the level is
set too high. The microphone and
Aux Send are a combined input. If
you see this red LED ashing, you
should decrease the <Mic> and/or
<Aux Send> input levels.
1. Mic Control
Controls the level of your
microphone input.
8
1 2 3 4 5 6 7
9
Controls & Indicators 3
6. Headphones Control
Sets the level of audio sent to the
headphone output jack.
7. Power Indicator
LED indicates when the power
is turned on and dims when the
battery charge is getting low.
8. Multi-Function Button (MFB)
Establish a connection with your
Bluetooth enabled cell phone,
laptop or other device.
9. Power Button
Press to activate the unit. Press
again to turn the unit o.
Controls & Indicators
3. Aux Send Control
Adjusts the level of audio from the
3.5 mm Aux Send input jack.
4. Stereo LED (Listen-Only)
The <st> LED ashes Red when
the BluePack has a stereo listen-
only (Headset) audio connection
with your Bluetooth device.
When you receive an incoming
phone call, the stereo LED will turn
o.
This LED will ash Green when the
unit is in Master mode, sourcing
stereo A2DP audio to a Bluetooth
enabled headset device
5. Bluetooth LED
See section on Bluetooth Wireless
Technology.
4BluePack Wireless Interview Tool
2. Stereo Line Level Output
The unbalanced 3.5 mm stereo
xed line level output jack provides
your full bandwidth microphone
signal on the left channel and
the Bluetooth audio on the right
channel.
Getting Connected
1. Headphones
Connect your headphones to this
1/4” jack. The stereo headphone
output gives you a mix of the XLR
mic input, 3.5 mm Aux Send input
and the Headset Interface audio.
1 2 3 4
Autres manuels pour BluePack
4
Table des matières
Autres manuels JK Audio Enregistreur vocal
