JEKKO SPX532 Manuel utilisateur

SPX532 – QUICKSTART GUIDE

REVISION

ISSUED BY

ENRICO P.

DATE OF RELEASE

13/03/2020

REVISIONED BY

IGOR P.

DATE OF REVISION

13/03/2020

APPLIED TO

MODELS

SPD-SERIES

SPD265

SPD360

SPD500

JF-SERIES

JF30 JF40 JF365 JF545 JF990

SPX-JUNIOR

SPB209 SPX312 SPX424 SPX429

SPX-SENIOR

SPX527 SPX536 SPX1040 SPX1275

MPK-SERIES

MPK20 MPK50

NEW SERIE

SPX532 SPX1280

OTHERS

SPK 60 OTHER TOOLS INSTRUMENT

SPX532

Quickstart Guide

SPX532 – QUICKSTART GUIDE

INDEX

1. TURN ON THE POWER ....................................................................................................................................................................................... 3

2. RELEASE THE EMERGENCY BUTTON ................................................................................................................................................................... 4

3. POWER UNIT SELECTION.................................................................................................................................................................................... 5

4. TURN ON THE REMOTE CONTROL ...................................................................................................................................................................... 6

5. START/STOP DIESEL ENGINE (OR POWER PACK)................................................................................................................................................. 7

6. CONFIRM LMI CONFIGURATION ........................................................................................................................................................................ 8

7. MODIFY LMI CONFIGURATION........................................................................................................................................................................... 9

8. WORKING MODE SELECTION ............................................................................................................................................................................11

9. TRACKS ............................................................................................................................................................................................................13

10. OUTRIGGERS UP & DOWN ................................................................................................................................................................................16

11. CRANE..............................................................................................................................................................................................................23

12. PICK & CARRY...................................................................................................................................................................................................26

13. MACHINE STABILITY (NO FUNCTIONS AVAILABLE) ............................................................................................................................................30

14. ENGINE POWER MODE SELECTOR .....................................................................................................................................................................32

15. WINCH SPEED REDUCTION SELECTOR ...............................................................................................................................................................33

16. CRANE SPEED REDUCTION SELECTOR................................................................................................................................................................34

17. ALARMS & WARNINGS .....................................................................................................................................................................................35

SPX532 – QUICKSTART GUIDE

1. TURN ON THE POWER

Go to the right side of the machine’s central frame, where the

main switch is placed.

On the right side panel there are the following devices:

•main power switch (1);

•main power led indicator (2);

•emergency button (3);

•power unit switch selector (4);

•hour counter (5).

Turn on the Main power switch to energize the machine (the Main

power led indicator will turn on).

RIGHT SIDE PANEL

SPX532 – QUICKSTART GUIDE

2. RELEASE THE EMERGENCY BUTTON

Check and release the emergency button on the right side panel of the

machine.

Check and release the emergency button on the remote control.

SPX532 – QUICKSTART GUIDE

3. POWER UNIT SELECTION

By rotating the Power unit switch selector (located on right side panel) it will be possible to engage

the desired power unit:

*if power pack is present.

SPX532CL version

SPX532CDH version

LITHIUM BATTERY PACK

POWER PACK *

DIESEL ENGINE

POWER PACK *

SPX532 – QUICKSTART GUIDE

4. TURN ON THE REMOTE CONTROL

Turn on the remote control key.

Press once the Start button on the left side of the remote control

and wait for “Loading HMI …” (about 5 sec.)

When requested on the screen, press again the Start button and wait for

“Configuring Radio”.

SPX532 – QUICKSTART GUIDE

5. START/STOP DIESEL ENGINE (OR POWER PACK)

To start the diesel engine on SPX532CDH version (or the power pack electric motor), use the Engine

start/stop selector on the remote control:

START DIESEL ENGINE / POWER PACK

TURN OFF DIESEL ENGINE / POWER PACK

OR PRE-HEAT THE PLUGS (IF DIESEL ENGINE IS SELECTED AND IS OFF)

NOTE FOR SPX532CL MODEL ONLY:

The lithium battery pack power unit doesn’t need to be started/stopped using the Engine selector:

as soon as one or more functions are operated from the remote control, the electric motor is

activated and the pump starts/stops running automatically.

SPX532 – QUICKSTART GUIDE

6. CONFIRM LMI CONFIGURATION

The LMI configuration page will be displayed automatically (see

the picture beside).

Press the button (on top of the screen to the right) to confirm the LMI

configuration.

IMPORTANT:

Always check the congruity between the LMI configuration on the display and the real

configuration of the machine!

Once the LMI settings are confirmed, the LMI icon on top of the

screen will become green:

LMI CONFIGURATION CONFIRMED

LMI CONFIGURATION NOT CONFIRMED

SPX532 – QUICKSTART GUIDE

7. MODIFY LMI CONFIGURATION

Only if needed, use the Line falls selector to modify the LMI configuration and set the correct

number of rope lines/falls or the hook mode:

INCREASE THE ROPE LINE FALLS NUMBER

PRESS ONCE TO GO BACK TO HOOK MODE IMMEDIATELY

7.1. LMI possible configurations

NOTE:

The machine recognizes automatically the tool installed, thanks to the Plug&Play feature.

The operator is responsible to properly set the rope line falls or hook mode.

MAIN BOOM:

Hook mode

1 line

2lines

3 lines

4 lines

JIB1000.2HL1MX:

Hook mode

1 line

SPX532 – QUICKSTART GUIDE

7.2. SELECTION JIB ON BOARD

From LMI configuration page it is possible to select jib

on board by pressing Button 3.

Jib on board icon legend

JIB PARKED ON BOARD: the LMI takes in count

the weight of the jib parked on the boom

JIB NOT ON BOARD: the LMI doesn’t take in

count the weight of the jib

NOTE:

On SPX532 the counterweight is not removable!

Table des matières

Autres manuels JEKKO Matériel de construction

JEKKO

JEKKO SPD265C+ Mode d'emploi

JEKKO

JEKKO SPD265C+ Mode d'emploi

Manuels Matériel de construction populaires d'autres marques

SASFORKS

SASFORKS EXTREME Manuel utilisateur

Hailo

Hailo H-50 Manuel utilisateur

Graco

Graco LineLazer ES 1000 Manuel d'utilisation et d'entretien

Greenlee

Greenlee 555RSC Manuel utilisateur

Manitowoc

Manitowoc Grove CD3340B Manuel utilisateur

Lux Tools

Lux Tools A-FMR-20 Set Manuel utilisateur

SIP

SIP 03683 Manuel utilisateur

Volvo

Volvo L30G Manuel utilisateur

Grizzly

Grizzly G8712 Manuel utilisateur

Modulift

Modulift CMOD 12 Manuel utilisateur

Case

Case DV201 Manuel utilisateur

Sealey

Sealey SC10.V2 Manuel utilisateur

Wacker Neuson

Wacker Neuson DT05 Manuel utilisateur

HYVA

HYVA AMCO VEBA 81 Series Manuel utilisateur

Atlas Copco

Atlas Copco Dynapac V5100TV Manuel utilisateur

Toro

Toro 323 Manuel utilisateur

Manitowoc

Manitowoc National Crane 1400A Manuel utilisateur

SGS

SGS EC1500 Manuel utilisateur