JCM Technologies GSM-CARD Manuel utilisateur

GSM-CARD / VGSM-CARD

communications card

User Manual

Table of contents

Important safety instructions 3

Use of the equipment 3

Introduction 4

General description 4

Installation 5

Assembly 5

Configuration 6

GSM-CARD 6

VGSM-CAR 6

Verification 7

LED indicators 7

GSM LEDs 7

Communication LEDs 7

Operation LEDs 8

ERROR LED 8

Solving problems 9

FAQs 9

Notes 10

Technical details 12

Regulatory Data 12

EU Declaration of conformity 12

jcmtechnologies

Important safety instructions

Disconnect the power supply whenever you proceed

to the installation or repair of the equipment.

In compliance with the European Low Voltage Directive, we inform you of the fol-

lowing requirements:

•When the devices remain permanently connected, an easily accessible connecting

device must be incorporated into the wiring.

•This system must only be installed by qualified professionals that have with auto-

mated garage doors and knowledge of the relevant European standards.

•The user instructions for this device must always be in the user’s possession.

•The operating frequency of the receiver does not interfere in any way with the 868

MHz remote control systems.

Use of the equipment

This device is designed for applications with an automated garage door. It is not guar-

anteed for the direct activation of devices other than those specified. The man-

ufacturer reserves the right to change the device specifications without warning.

jcmtechnologies

Introduction

General description

GSM communication card for real-time management

Connected to an ACCESS-5K access control, it allows remote management of users.

Connected to a VERSUS control panel, it allows remote configuration of parameters

and alarms.

jcmtechnologies

Installation

Assembly

jcmtechnologies

Configuration

GSM-CARD

To change the default options, you must install the SoftAssistant program for Win-

dows.

For more information, visit:

https://www.jcm-tech.com/JCM/soft-assistant/

VGSM-CAR

To configure the device, please access the following website:

https://versuscloud.jcm-tech.com/Account/Login

jcmtechnologies

Verification

LED indicators

GSM LEDs

GOOD Good coverage. Optimum data transfer

POOR Weak coverage, but sufficient for data transfer

BAD Unstable coverage or no connection. We recommend you not

use the device in this status, as there may be errors

When led indicator is bad, it is recommended to use

a 3 meters long GSM antenna extension cable.

Communication LEDs

TX Lit during data transmission

jcmtechnologies

Operation LEDs

OK System working correctly (flashing=in process)

ALARM Use of backup GSM frequency (850 MHz)

ERROR System error

If the GSM-CARD uses the backup frequency, it can

interfere with the Motion transmitters.

ERROR LED

Number

flashes Error type Action required

1 Module initialisation Wait for the initialization to be com-

pleted

2 SIM card not detected Check SIM card insertion

3 Incorrect PIN Modify communication settings in

SoftAssistant

4 SIM card locked Unlock SIM card (for example, with

a free mobile)

5 No communication Review GSM antenna connection

(see GSM leds)

6 Adjustments not valid Check Unique Key and APN in

SoftAssistant

7 Server not detected Contact M2M service provider

jcmtechnologies

Solving problems

FAQs

Q: Can I use the supplied SIM to surf in Internet with a smartphone?

A: No, the SIM card is type M2M (Machine to Machine), therefore it only connects the

main equipment to a private server.

Q: Can I use any SIM card, for example the one I have on my phone?

A: No you cannot. It only works with bidirectional M2M SIMs from approved operators

and specifically configurated.

Q: With the serial number that appears on the label, can you access your computer

through any SoftAssistant?

A: No, you cannot. In addition to the serial number, it is also required the unique key to

connect remotely.

Q: If I have the main equipment installed, will it work remotely only by plugging in a

GSM-CARD?

A: Yes, the card is configured by default with the communication parameters of the

approved operator.

jcmtechnologies

Notes

jcmtechnologies

Autres manuels pour GSM-CARD

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels JCM Technologies Système de conférence

JCM Technologies

JCM Technologies GSM-CARD Manuel utilisateur

Manuels Système de conférence populaires d'autres marques

Kramer

Kramer VIA GO Manuel utilisateur

AVT

AVT MAGIC AC1 Go Manuel utilisateur

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuel utilisateur

Sony

Sony PCS-I150 Manuel utilisateur

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuel utilisateur

Prentke Romich Company

Prentke Romich Company Vanguard Plus Mode d’emploi

Speakerbus

Speakerbus iD 712 Manuel utilisateur

Trelleborg

Trelleborg SafePilot CAT PRO Manuel utilisateur

Sennheiser

Sennheiser ADN Manuel utilisateur

ADTRAN

ADTRAN NetVanta 7100 Manuel utilisateur

AINA

AINA PTT Voice Responder Manuel utilisateur

Yamaha

Yamaha ProjectPhone PJP-100H Manuel utilisateur

vissonic

vissonic VLI Series Manuel utilisateur

Panasonic

Panasonic KX-VC500 Manuel utilisateur

Poly

Poly Trio 8300 Manuel utilisateur

Crestron

Crestron Mercury CCS-UCA-SMK Dessin dimensionnel

Inmarsat

Inmarsat mini M Manuel utilisateur

Tenveo

Tenveo ALL-IN-ONE Manuel utilisateur