JBL Studio 1 series Manuel utilisateur

JBL

STUDIO 1 SERIES

User GUide

loudspeakers

www.jbl.com

For more than 60 years, JBL

engineers have been involved in every aspect of music and ﬁlm recording and

reproduction, from live performances to the recordings you play on the go and in your home, car or oﬃce.

We’re conﬁdent that the JBL system you have chosen will provide every note of enjoyment you expect – and that when

you think about purchasing additional audio equipment for your home, car or oﬃce, you will once again choose JBL

products.

Please take a moment to register your new product on our Web site, www.jbl.com. Registering enables us to keep you

posted on our latest advancements and helps us to understand our customers and build products that meet their

needs.

INCLUDED ITEMS

Each box contains one or two loudspeakers, depending on the model, as indicated below.

THANK YOU FOR CHOOSING THIS JBL

PRODUCT

Studio 190

One Studio 190 speaker

Studio 180

One Studio 180 speaker

Studio 130

Two Studio 130 speakers

Studio 120c

One Studio 120c speaker

Card with adhesive rubber feet

(Studio 130 – two cards,

Studio 120c – only one card)

www.jbl.com

ENGLISH

STUDIO 190/STUDIO 180/STUDIO 130  LEFT AND RIGHT CHANNELS

For best results, place the speakers 6 – 10 feet (1.8m – 3m) apart. Angling the speakers toward the listening position can

improve the stereo imaging. The speakers will produce the most accurate stereo soundstage when the angle between

the listener and the speakers is between 40 and 60 degrees.

Generally, bass output will increase as the speaker is moved closer to a wall or corner.

For best performance, we recommend that you place the speakers at least 20 inches (51cm) away from the side walls.

Position

•

Studio 130 shelf speakers so that their tweeters are approximately at ear level. Peel the adhesive rubber feet

from the card and apply them to the bottoms of the speakers.

PLACEMENT

6 – 10 ft

(1.8m – 3m)

40° – 60°

>20 in

(>51cm)

Rubber

Feet

www.jbl.com

STUDIO 120c

You should place the center speaker directly above or below the center of your TV screen. The speaker’s center should

be no more than 2 feet (61cm) above or below the tweeters of the front left and front right speakers. If your TV set is

deep enough, you can set the center speaker on top of the TV, with the speaker’s front edge even with the TV’s front

edge.

Peel the adhesive rubber feet from the card and apply them to the bottom of the speaker.

•

Studio 120c

Center Speaker

Studio 190/180/130

Front Left Speaker

Studio 190/180/130

Front Right Speaker

0 – 2ft

(0 – 61cm)

Rubber

Feet

www.jbl.com

ENGLISH

STUDIO 130  SURROUND CHANNELS 5.1CHANNEL SYSTEM

When you use Studio 130 speakers as surround-channel speakers in a 5.1-channel system, place them slightly behind

the listening position, facing each other. Ideally, they should be 5 – 6 feet (1.5m – 1.8m) above the ﬂoor. An alternate

location would be on a wall behind the listening position, facing forward. The surround speakers should not call

attention to themselves while they’re playing. Experiment with their placement until you hear a diﬀuse, ambient sound

accompanying the sounds that you hear from the front left, front right and center speakers.

Studio

190/180/130

Front Left

Speaker

Surround Right

Speaker

Surround Left

Speaker

5 – 6 ft

(1.5m – 1.8m)

Studio 120c

Center Speaker

Studio

190/180/130

Front Right

Speaker

Studio 130

Surround Left

Side Speaker

Studio 130

Surround Right

Side Speaker

www.jbl.com

STUDIO 130  SURROUND CHANNELS 7.1CHANNEL SYSTEM

When you use Studio 130 speakers as surround-channel speakers in a 7.1-channel system, place the surround side

speakers directly to the sides of the listening position, at least 5 – 6 feet (1.5m – 1.8m) above the ﬂoor. Place the surround

back speakers on the wall behind the listening position, also at least 5 – 6 feet (1.5m – 1.8m) above the ﬂoor and 3 – 6

feet (0.9m – 1.8m) apart.

Studio

190/180/130

Front Left

Speaker

Studio 130 Surround

Left Back Speaker

Studio 130 Surround Right

Back Speaker

Studio 120c

Center Speaker

3 – 6 ft apart

(0.9m – 1.8m)

Studio

190/180/130

Front Right

Speaker

Studio 130

Surround Left

Side Speaker

Studio 130

Surround Right

Side Speaker

²

Studio 130, Studio 120c

Studio 190, Studio 180

www.jbl.com

ENGLISH

CAUTION: Make sure that all of the system’s electrical components are turned OFF (and preferably

unplugged from their AC outlets) before making any connections.

Speakers and ampliﬁers have corresponding positive and negative (“+” and “–”) connection terminals. All Studio 1 series

speakers have connection terminals that are marked “+” and “–” on the terminal-cup assembly. Additionally, the “+”

terminals have red markings, while the “–” terminals have black markings.

To ensure proper polarity, connect each “+” terminal on the back of the ampliﬁer or receiver to the respective “+” (red)

terminal on each speaker. Connect the “–” terminals in a similar way. Do not reverse polarities (i.e., “+” to “–” or “–” to “+”)

when making connections. Doing so will cause poor stereo imaging and diminished bass performance.

IMPORTANT: Make sure the (+) and (–) wires or connectors do not touch each other or the other terminal.

Touching wires can cause a short circuit that can damage your receiver or amplier.

BASIC SINGLEWIRE CONNECTION

Connect the ampliﬁer to each speaker as shown in the illustration below.

For the Studio 190 and Studio 180 speakers, you can use either set of terminals on the connector panel.

IMPORTANT: Do not remove the metal jumpers from between the two sets of terminals when connecting

the speaker wires.

CONNECTIONS

Use Either Set

of Terminals

Do Not Remove

Jumper Strips

Receiver or Ampliﬁer

(One Channel Shown)

Receiver or Ampliﬁer

(One Channel Shown)

Speaker

Connector Panel

Speaker

Connector Panel

1. 2. 3. 4.

2. 3.

www.jbl.com

The Studio 1 series speakers’ gold-plated speaker terminals can accept a variety of wire connector types: bare wire, pin

connectors, spade connectors and banana connectors.

USING BARE WIRE OR PIN CONNECTORS:

USING SPADE CONNECTORS:

USING BANANA CONNECTORS:

www.jbl.com

ENGLISH

BIWIRE CONNECTION STUDIO 190/STUDIO 180

The Studio 190 and Studio 180 connection assemblies have two sets of input terminals that are connected by metal

jumper bars. The upper set of terminals is for the midrange/tweeter, and the lower set of terminals is for the woofer(s).

This arrangement allows you to bi-wire the speakers using a single stereo ampliﬁer or using two stereo ampliﬁers.

Bi-wiring can oﬀer sonic advantages and more ﬂexibility in power-ampliﬁer selection over a conventional single-wire

connection.

Before bi-wiring the speakers, remove the jumper bars.

SINGLEAMPLIFIER BIWIRING

DUALAMPLIFIER BIWIRING

Remove Jumpers

Ampliﬁer

Ampliﬁer 1

Ampliﬁer 2

Left

Ch.

Left

Ch.

Left

Ch.

Right

Ch.

Right

Ch.

Right

Ch.

Midrange/Tweeter

Terminals

Woofer

Terminals

Left

Speaker

Left

Speaker

Right

Speaker

Right

Speaker

Midrange/Tweeter

Connection

Midrange/

Tweeter

Connection

Woofer

Connection

Woofer

Connection

Midrange/Tweeter

Connection

Midrange/

Tweeter

Connection

Woofer

Connection

Woofer

Connection

For more information about various speaker-wire and connection options, contact your local JBL dealer.

www.jbl.com

Wipe the cabinet with a clean, dry cloth to remove dust. Damp cloths may dull the cabinet’s ﬁnish. Do not use volatile

•

liquids such as benzene, paint thinner or alcohol on the cabinet.

Do not spray insecticide near the cabinet.

•

To remove dust from the grille fabric, use a vacuum cleaner set to low suction.

•

Do not wash the grilles in water, as it may fade the color or make it uneven.

•

If the surfaces of the woofer and midrange cones become dusty, you can carefully sweep them clean with a soft, dry

•

calligraphy brush or paint brush. Do not use a damp cloth.

NEVER touch anything to the tweeter dome.

•

CARING FOR YOUR SPEAKERS

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels JBL Intervenants

JBL

JBL RM8 Rock Monitor Series Manuel utilisateur

JBL

JBL Northridge Series Manuel utilisateur

JBL

JBL Micro II Manuel utilisateur

JBL

JBL VP Series Manuel utilisateur

JBL

JBL 4312SX Manuel utilisateur

JBL

JBL Control Control 23 Manuel utilisateur

JBL

JBL Pulse2 Instructions d'utilisation et d'entretien

JBL

JBL 4800 Manuel utilisateur

JBL

JBL S-Center Studio Series Manuel utilisateur

JBL

JBL Harman Pulse 5 Manuel utilisateur

JBL

JBL VT4889ADP Manuel utilisateur

JBL

JBL L56 Manuel utilisateur

JBL

JBL CINEMA SB200 Manuel utilisateur

JBL

JBL BRX 300 Series Guide de référence rapide

JBL

JBL BOOST TV Manuel utilisateur

JBL

JBL DPS-12 Manuel utilisateur

JBL

JBL GTO325 Manuel utilisateur

JBL

JBL Studio S38 Manuel utilisateur

JBL

JBL ON BEAT VENUE LT Manuel utilisateur

JBL

JBL On Air Control 2.4G Manuel utilisateur

JBL

JBL 4800 Manuel utilisateur

JBL

JBL Paragon Manuel utilisateur

JBL

JBL PRX715XLF/230 Manuel utilisateur

JBL

JBL S36AW Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur