jbc FAE020 Manuel utilisateur
Flexible Arm for
FAE Fume Extractor
Ref. FAE020
INSTRUCTION MANUAL
www.jbctools.com
Packing List
The following items are included:
Flexible Arm for
FAE Fume Extractor ................................ 1 unit
Ref. FAE020
Manual ........................................................... 1 unit
Ref. 0019181
Annex ............................................................. 1 unit
Ref. 0020084
Screws ......................................................... 3 units
Ref. 0019142
Template
Flexible Arm Ø50
Ref. FAE020
~Ø 58
MAX. Ø 2
2
www.jbctools.com
STATION1
Filter
STATION2
PORT1
PEDAL1 PEDAL2
FAE2
FUME EXTRACTOR
PORT2
STATION3 STATION4
OK
70 cm / 27.6 in max.
Assembly
Lenght: 1 m
(39.37 in)
Connect the Flexible Hose
to Flexible Arm
Fume Extractor
Ref. FAE2-5A
Flexible
Hose Ø50
Ref. FAE010
Lenght: 1,5 m
(59.06 in)
Fix the clamp on your
workbench with the supplied
screws
www.jbctools.com
3
www.jbctools.com
STATION1
Filter
STATION2
PORT1
PEDAL1 PEDAL2
FAE2
FUME EXTRACTOR
PORT2
STATION3 STATION4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION1
Filter
STATION2
PORT1
PEDAL1 PEDAL2
FAE2
FUME EXTRACTOR
PORT2
STATION3 STATION4
OK
70 cm / 27.6 in max.
- When the flexible arm loses
firmness, it must be
re-compressed.
- For a greater compression,
turn it slightly clockwise.
- Once the arm is compressed,
adapt its position again.
You can replace the supplied nozzle and choose the one that best suits your needs.
Rectangular Nozzle for FAE Fume Extractor
Ref. FAE080
Round Nozzle for FAE Fume Extractor
Ref. FAE081
Arm assembly
Nozzles
4
www.jbctools.com
STATION1
Filter
STATION2
PORT1
PEDAL1 PEDAL2
FAE2
FUME EXTRACTOR
PORT2
STATION3 STATION4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION1
Filter
STATION2
PORT1
PEDAL1 PEDAL2
FAE2
FUME EXTRACTOR
PORT2
STATION3 STATION4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION1
Filter
STATION2
PORT1
PEDAL1 PEDAL2
FAE2
FUME EXTRACTOR
PORT2
STATION3 STATION4
OK
70 cm / 27.6 in max.
Turn the nozzle and pull out to
remove it.
A bayonet fitting system
allows a proper connection
between the flexible arm and
the nozzle.
The nozzles are designed to
work with the arm suspended
and also supported on the
work bench.
Nozzle Replacement
Installation Guide Line
www.jbctools.com
STATION1
Filter
STATION2
PORT1
PEDAL1 PEDAL 2
FAE2
FUMEEXTRACTOR
PORT2
STATION3 STATION4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION1
Filter
STATION2
PORT1
PEDAL1 PEDAL2
FAE2
FUMEEX TRACTOR
PORT2
STATION3 STATION4
OK
70 cm / 27.6 in max.
To protect fexible arm tube from braking follows these installation guide lines.
work bench
Do not install the flexible arm on shelves or
higher levels than the work bench. Forced
bending radii can cause arm breakage.
The recommended working area of the arm
is 70 cm / 27.6 inches from the center of
its base. Extending the arm more than this
dimension could break it.
www.jbctools.com
5
Notes
6
Notes
www.jbctools.com
7
Specifications
0019181-1220
- Weight: 1,75 kg (3.85lb)
- Length: 1 m (39.4 in)
- Inner Diameter: 50 mm (2 in)
- Total Package Dimensions / Weight: 1050 x 170 x 120 mm / 2.394 kg
(L x W x H) 41.34 x 6.7 x 4.72 / 5.28 lb
Complies with CE standards.
ESD protected.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
www.jbctools.com
Table des matières
Autres manuels jbc Ventilateur
