Jaycar Electronics QC8019 Manuel utilisateur
Mini HD Camera
w/ HD Recording in 720p
QC8019
2
Product Features
3
1. Infrared lamp 2. Lens 3. Remote control 4. USB
5. TV-OUT 6. TF card slot 7. Blue light (work instructions)
8. Camera key 9. Playback key 10. Capture key
11. Red (charge indicator) 12. Mounting bracket
4
Operation:
1. Insert the TF card 2. With the remote, press the power button,
this will put the camera in standby mode.
Note:
1. SD file format for encoding is FAT32
2. If the battery voltage is low, a blue indicator light will flash,
and automatic shutdown will occur after 10 seconds.
3. If you do not insert the TF card, ten blue indicator lights will flash,
automatic shutdown will occur after 10 seconds.
5
Camera:
1. Video Camera: In Standby, Press the button on the remote
control, a continuous blue light starts flashing, indicating that video is in
progress. Press the button again to stop recording.
Note:
1. The cameras automatic coverage feature will overwrite any previously
recorded data when the memory card is full.
6
2. Motion Detection Mode:In standby, press the button on the
remote control to enter this mode
Motion Detection:
*Camera will start to record when objects are detected within 3m range
*If an object is not detected after 10 seconds, after motion detection is
triggered, then camera will enter standby.
*Recording will commence again, when the motion detection is triggered.
7
Note:
1. Motion detection state, no moving objects, it will automatically save the
data
2. Continuous video motion detection mode, video will be saved every 10
seconds
3. Press the button again to cancel the motion detection function.
8
Note
1. If recording process is not manually stopped and power to battery is
drained, video will not be saved.
2. In long recording mode, video will automatically be saved every 1
minute.
Photo Mode: In standby mode, Press the camera key to enter
Photo Mode.
Press the camera button, the blue light will flash once, indicating a
successful photo.
9
Clock function during video
The camera supports the process of inserting a video clock upon set up of
camera; please follow these steps to update the time.
* Changing Date/Time:
1. Create a text file and save name as - time.txt, as shown below:
10
2. Open time.txt file, fill in year/month/day hours/minutes/seconds, as
shown below:
Autres manuels Jaycar Electronics Caméra IP
