Javad TRIUMPH-1 Guide rapide

All contents in this manual are copyrighted by JAVAD GNSS.

stored, displayed, sold, modified, published, or distributed, or otherwise reproduced without express

written consent from JAVAD GNSS.

GSM Base and Rover

Configuration Example

for TRIUMPH-1, SIGMA, and GISmore Receivers

Version 1.1

Last Revised August 18, 2009

www.javad.com

3www.javad.com

GSM BASE & ROVER

CONFIGURATION EXAMPLE

Base Station Configuration

1. Start ModemVU.

2. Select TRIUMPH-1X Internal Radio1and click OK (Figure 2-1).

Figure 2-1. ModemVU. Options window

1. For SIGMA receiver select SIGMA; for GISmore select GISmore

GSM Base & Rover Configuration Example

Base Station Configuration

4www.javad.com

3. Select the port receiver is connected to and click Connect (Figure 2-2).

Figure 2-2. ModemVU. Connection

4. Set the Radio and GSM parameters to OFF and click Apply.

5. Click Connect GSM button (Figure 2-3).

Figure 2-3. ModemVU ALPHA Internal Radio selection

6. In the Master/Slave tab set the following parameters, and click Apply (Figure 2-4):

Figure 2-4. Master/Slave tab settings

• Dial number: empty

•SendTimeOut:2

• Receive Time Out: 5

GSM Base & Rover Configuration Example

Base Station Configuration

5www.javad.com

7. In the General tab insert your SIM card PIN code (if needed), then set the mode to Slave,

and click Apply.

Figure 2-5. General tab settings

8. Wait until the modem will establish connection with net. The Modem status will be

ready (at first detecting, registration, than ready).

Figure 2-6. Modem status “ready”

9. Quit ModemVU by clicking Exit button.

GSM Base & Rover Configuration Example

Base Station Configuration

6www.javad.com

10. Start TriVU. Select port the receiver is connected to and click OK (Figure 2-7).

Figure 2-7. TriVU. Selecting port

11. Click ConfigurationReceiver.

12. In the Base tab click the Get from receiver button. Reference geodetic coordinates appear.

Click Apply (Figure 2-8).

Figure 2-8. Base tab

GSM Base & Rover Configuration Example

Base Station Configuration

7www.javad.com

13. In the Ports tab Serial subtab set the Port B Output mode to RTK CMR, and click Apply,

then OK (Figure 2-9).

Figure 2-9. Rover tab

14. Quit TriVU.

GSM Base & Rover Configuration Example

Rover Configuration

8www.javad.com

Rover Configuration

1. Start ModemVU.

2. Select Triumph 1X Internal Radio1and click OK (Figure 2-10).

Figure 2-10. ModemVU. Options window

3. Select the port receiver is connected to and click Connect (Figure 2-11).

Figure 2-11. ModemVU. Connection

4. Set the Radio and GSM parameters to OFF and click Apply.

1. For SIGMA receiver select SIGMA; for GISmore select GISmore

GSM Base & Rover Configuration Example

Rover Configuration

9www.javad.com

5. Click Connect GSM button (Figure 2-12).

Figure 2-12. ModemVU TRIUMPH Internal Radio selection

6. In the Master/Slave tab set the following parameters, and click Apply (Figure 2-4):

Figure 2-13. Master/Slave tab settings

• Dial number: phone number of the Base station’s SIM card.

• Send Time Out: 2

• Receive Time Out: 5

GSM Base & Rover Configuration Example

Rover Configuration

10 www.javad.com

7. In the General tab insert your SIM card PIN code (if needed), then set the mode to

Master, and click Apply;

Figure 2-14. General tab settings

8. Wait until the modem will establish connection with net: the Modem status will be at first

detecting, than registration. Wait until the connection with the Base will be

established: the Modem status will be at first dialing, than connected with the

connection baud rate value.

Figure 2-15. Modem status “connected”

9. Quit ModemVU by clicking Exit button.

Autres manuels pour TRIUMPH-1

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Javad Récepteur

Javad

Javad TRIUMPH-2 Mode d’emploi

Javad

Javad GISmore Manuel utilisateur

Javad

Javad TRIUMPH-LS Manuel utilisateur

Javad

Javad TRIUMPH-LS Manuel utilisateur

Javad

Javad TRIUMPH-2 Manuel utilisateur

Javad

Javad DELTA-3 Manuel utilisateur

Javad

Javad TRIUMPH-1 Guide rapide

Javad

Javad DELTAGNSS Receiver Manuel utilisateur

Javad

Javad TRIUMPH-1M Manuel utilisateur

Javad

Javad TRIUMPH-3 Manuel utilisateur

Javad

Javad TRIUMPH-1M Manuel utilisateur

Javad

Javad TRIUMPH-3 Mode d’emploi

Javad

Javad OMEGA Manuel utilisateur

Javad

Javad TRIUMPH-VS Manuel utilisateur

Javad

Javad TRIUMPH-VS Manuel utilisateur

Javad

Javad UHFSSRx Manuel utilisateur

Javad

Javad TRIUMPH-1M Manuel utilisateur

Javad

Javad ALPHA Manuel utilisateur

Javad

Javad DELTA-3N Manuel utilisateur

Javad

Javad TRIUMPH-VS Manuel utilisateur

Javad

Javad TRIUMPH-3NR Manuel utilisateur

Javad

Javad TriPad Manuel utilisateur

Javad

Javad TRIUMPH-1 Manuel utilisateur

Javad

Javad DELTA Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur