Jarv 10000MAH Manuel utilisateur
USERS GUIDE
10000mAh Banco de energía con almohadilla
de carga inalámbrica
10000mAh
10000MAH
Thank you for purchasing our 10000mAh Power Bank
with Wireless Charging Pad.
Included in this document are technical specifications
of the Powerbank and instructions for use.
Before using this product please read the manual
carefully
1
FEATURE S
• Wireless & Wired Charging in 1 device
• Compact and Portable power bank
• Built-in high powered 10000mAh battery,
providing up to 5 charges to your smartphones and
tablets.
• Micro USB and Type-C Inputs for charging
• Bi-Directional Charging – Wirelessly Charge your
device and Recharge your Powerbank wirelessly
• Built-in safety system to protect your devices
against excessive current, overheating, and
overcharging.
• Compatible with any Qi-enabled and USB Powered
smartphones and mobile devices
Our products are compliant with FCC certifications
2
SPECIFICATION:
PACKAGE CONTENTS:
1X Jarv 10000mAh Power Bank with Wireless
Charging Pad
1X Charging Cable
1X Users Guide
Capacity: 10,000 mAh
Wireless Charger: Charging Input/Output:
5V / 1A
Powerbank: Charging Input/Output:
5V / 2000 mA (max)
Dimensions: 5.3 x 2.8 x 0.6 inches
Weight: 7 oz (bulk)
Battery Type: Polymer battery
Compatibility: Qi enabled devices,
USB enabled devices.
3
Wireless
Charger Receiver
Power Button
LED Indicator
Display USB output
Type C
Input
Micro USB
Input
Wireless
Charging
Pad
WIRELESS CHARGING PAD
OVERVIEW:
4
LED INDICATOR GUIDE:
INDICATOR
Red LED indicator light
Green LED indicator light
Blue LED indicator light
STATUS
Wired+ Wireless
Charging Mode
Wireless Charging in use
Battery Level
5
GETTING STARTED:
Powering On and Powering Off the Powerbank
1. Press the Power button briefly to POWER ON the
Powerbank. The Blue LEDs will flash to display battery
capacity.
2. Press and hold to Power button for 3 seconds to
POWER OFF the Powerbank, all LED indicator lights
will turn off.
Power ON / OFF
6
CHARGING THE POWERBANK:
1. Connect your Powerbank using the included Micro
USB cable or your Type-C Cable to a PC USB port or AC
power adaptor (Max. support 2A). This Powerbank can
also be charged wirelessly by placing it on a wireless
charging base (not included). When connected correctly,
the power bank will automatically start charging.
2. When charging, the LED indicator will turn Blue and
the corresponding battery capacity will blink.
3. When fully charged, the 4 Blue LED indicator lights
will be displayed as full and will stop blinking.
4. When the power bank is fully charged, disconnect
the USB cable from the Powerbank.
Blue LED Indicator Power Capacity
1 LED 0-25%
2 LED 25-50%
3 LED 50-75%
4 LED 75-100%
7
CHARGING USB POWERED
DEVICES:
This powerbank is able to charge most USB powered
devices
1. Plug your USB cable into the Powerbank USB
Output port.
2. Plug the other end of the cable in your device
3. When connected correctly, the connected device
will automatically start charging.
4. Once charging is complete, simply unplug your
device and disconnect the cable from the power bank
5. If no device is being charged, the Powerbank will
turn off automatically after 20 seconds.
8
WIRELESS CHARGING OF QI
ENABLED DEVICES:
This Powerbank works with most Qi enabled devices Or
Qi internal devices with built-in wireless receivers
1. Place your Qi-enabled device on the wireless
charging pad. Make sure the center of the device is
aligned over the center of the charging base. Charging
will begin on contact.
2. The LED indicator will turn green to indicate a
wireless device is being charged. If the Green LED light
does not turn on, please make sure your device is
properly aligned to the wireless charging pad.
3. If no charging load is placed on the device, the
Powerbank will turn off automatically after 20 seconds.
DO NOT PUT ANY METAL OR MAGNETS BETWEEN
THE POWER BANK AND CHARGING DEVICE WHILE
CHARGING WIRELESSLY
0/
Table des matières
Autres manuels Jarv Accessoires
