Hydraulic Stripper
MASTER-MOBIL
1 RULES FOR SAVE OPERATION
OPERATING INSTRUCTIONS 5
1.2 Staff
The operator has to be instructed to the use of the machine before operating.
Non observance of the instruction manual before commissioning, adjustment or maintenance could
cause serious injury to personal or objects.
Read unexceptionally all security statements. Be sure that type plate, security symbols as
commandments, warnings, precautions and the directives are mounted / fixe to the machine.
Non observance of the directives inside this manual may cause serious injury or damage.
Always wear eye-protection, protective suit, dust-mouthguard / dust respirator and ear-protec-
tion during the usage of the machine. The noise that appears while removing flooring can be so
intense that at long term use it may cause injury of the auditory tube. Working without appropriate
security equipment, as for instance a protective suit, can injure eyes and body. Arising airborne dust
may be inhaled when wearing no mouthguard.
Keep arms, feet and clothes away from the operating machine parts.
Moving parts of the machine can cause serious injury or damage.
1.3 Usage
Fluid under pressure is dangerous and can cause serious injury.
Leaking hydraulic fluid is not only unsightly, it's hazardous. In addition to making workplace floors slippery and
dangerous, leaks also contaminate the environment. Our system runs at or below 83 bar. Never look for a leak
when unit is under pressure. Only check and service when not under pressure.
Fluids under pressure can cause serious injury. If fluid punctures the skin, even if no pain is felt, a serious emer-
gency exists. Obtain medical assistance immediately. Failure to do so can result in loss of the injured part or
death.
Escape of hydraulic fluid
Pinhole: It can be almost invisible escaping from a pinhole, and it can pierce the skin into the body. Do not touch
a pressurized hydraulic hose assembly with any part of your body. Leak: Keep hoses and fittings tight. Only
check and service when not under pressure.
Never check for leaks over hose or hydraulic connections with any part of your body. Instead, use a piece of
cardboard to locate a pressurized leak. For drips (low pressure leaks), use a rag to clean the area and determine
where the leak originates.
Flammability of hydraulic fluids
With the exception of those compromised primarily of water, all hydraulic fluids are flammable when
exposed to the proper conditions (including many "fire-resistant" hydraulic fluids). Leaking pressurized
hydraulic fluids may develop a mist or fine spray that can flash or explode upon contact with a cause
of ignition. These explosions can be very severe and could result in serious injury or death.
Precautions should be taken to eliminate all ignition sources from contact with escaping fluids, sprays
or mists resulting from hydraulic failures. Sources of ignition could be electrical discharges (sparks),
open flames, extremely high temperatures, sparks caused by metal-to-metal contact.
