Janam XP series Manuel utilisateur
XP Series
Quick Start Guide
™
062411XPCom4
Technology at Work
.®
XP Series Quick Start Guide
Janam│The right features. The right price.Page 1
Copyright 2011 Janam Technologies LLC. All rights reserved.
Janam Technologies LLC assumes no responsibility for any damage or loss resulting from the use of this guide.
Janam Technologies LLC assumes no responsibility for any loss or claims by third parties which may arise through
the use of this product. Janam Technologies LLC assumes no responsibility for any damage or loss caused by
deletion of data as a result of malfunction, dead battery or repairs. To protect against data loss, be sure to make
backup copies (on other media) of all important data.
Follow all usage, charging and maintenance guidelines in the Product User Guide. If you have questions, contact
Janam. For a copy of the Product User Guide, visit the Resource Center at www.janam.com
Important: Please read the End User Software License Agreement for this product before using the device or
accompanying software program(s). Using the device or any part of the software indicates that you accept the
terms of the End User License Agreement.
XP Series, Janam and the Janam logo are trademarks of Janam Technologies LLC. Other product and brand names
may be trademarks or registered trademarks of their respective owners.
Content and Additional Resources
To help you get started with your XP Series mobile computer, this guide features:
-Hardware Overview
-Installing and Charging the Battery
-Getting Started
-Regulatory Information
Contents of this guide are subject to change. For the most current version of this guide and additional
product details visit, www.janam.com.
For Palm OS®software updates and information, visit www.access-company.com.
XP Series Quick Start GuidePage 2
2
3
4
5
67
8
9
8
9
10
6
4
7
10
11
12
11
2
3
PDA Keypad Numeric Keypad
13
12 14
16
17
15
12
1. Power
2. Indicator LED
3. LCD
4. Connector
5. Scan Trigger
6. Right Trigger
7. Left Trigger
8. Navigation
9. Home
10. Enter
11. Brightness/Contrast
12. Programmable
13. Function
14. Backspace
15. Alpha/Numeric Shift
16. Space
17. Shift
Hardware Overview
Page 3 XP Series Quick Start Guide
Hardware Overview
1. Battery Door
2. Battery Screw
3. Reset
4. Microphone (XP30 Series)
5a. Speaker (XP30 Series)
5b. Buzzer (XP20 Series)
6. IrDA Window
7. Stylus
8. Stylus Slot
9. Lanyard Connector
10. Handstrap Screw Port
11. Handstrap Bar
12. MiniSD or MicroSD Card Slot*
Page 4
7
4
2
3
5a/5b6
8
9
1
Battery Compartment
10
11
12
*Check your XP product(s) and be
sure to use the correct card type.
Janam│The right features. The right price.
A. INSTALLING THE BATTERY
1. To access the battery compartment, turn the battery screw counterclockwise to open the latch and
remove battery cover.
2. Position the battery-lift strap, place the Lithium-ion battery and snap into place.
3. Replace the battery cover by positioning the top prongs first and sliding cover into place.
Tighten battery screw by turning clockwise.
B. CHARGING THE BATTERY
Important Note: The main battery charges the backup battery in the XP Series unit. Once the main battery is
fully charged, do not remove it from the unit for 24 hours. During this period the device cannot maintain any
user data if the battery is removed.
To charge the battery using the USB or Serial Cable Accessory:
a. Connect the power supply to the USB or Serial cable accessory.
b. Connect snap-on end of USB or Serial cable accessory to bottom of device making sure the word “TOP”
on the connector faces front.
c. Insert appropriate AC plug and plug in the power supply. Use only easily accessible wall outlets that are
easily reached with the length of supplied power cable.
To charge the battery using the Single-Slot or Four-Slot Cradle:
a. Connect the power supply to the cradle.
b. Connect the line cord to the power supply.
c. Insert appropriate AC plug and plug in the power supply. Use only easily accessible wall outlets that are
easily reached with the length of supplied power cable.
d. Place the XP device in cradle. The LED will illuminate to confirm connection (orange indicates charging,
green indicates fully charged and red indicates fault).
e. The battery is fully charged in approximately 2 hours.
f. Charge a spare battery by placing the battery in the spare battery well with label up and connectors lined up.
Installing and Charging the Battery
Page 5 Janam│The right features. The right price.
Getting Started
A. CALIBRATING THE SCREEN
The first time the device is turned on, the Welcome Utility appears. To set up the device, follow the on-
screen instructions using the stylus to tap the exact center of each target
Note: If your XP Series device came pre-loaded with a custom software application, the Welcome Utility may
not appear.
B. ATTACHING THE HANDSTRAP
To attach the handstrap, first align the two holes in the metal handstrap anchor at the two handstrap screw
ports. Then, for each side, place one of the screws provided into a lined up screw hole/screw port and turn
clockwise. Secure both sides before fully tightening down the screws.
Separate velcro to extend the handstrap and feed loose end through the handstrap bar. Fasten velcro together
to close the strap. Fit strap and secure device to user’s hand by adjusting velcro as needed.
XP Series Quick Start GuidePage 6
BARCODE SCANNING DEMONSTRATION SET-UP
1. Tap the home button, and tap the Janam icon.
2. Tap the barcode scanner demo (application menu) in the upper left corner of the screen to display the setup
options.
3. Three menus will appear (setup, OCR, options).
4. After starting the demo application, a variety of options become available:
» Beep sound: you can enable or disable the sound whenever a successful barcode or optional character
recognition (OCR) occurs.
Note: you can control the volume of the sound from the prefs application located in home or main menu. In
the upper right corner’s drop-down menu, click and select general to change the volume.
» Light mode: This menu presents several options. You can turn off the illumination and aimer; turn the aimer
only on; turn on the illumination only; or turn on both aimer and illumination.
» Bar type: Display only – shows the symbology of the barcode scanned.
» Bar data: Display only – shows the result of the decoded object.
5. Tap the hardware test option to review all the functions of the scanner and determine if everything is working
properly. Select each item individually (aimer on, illumination on, vibrator on, red LED on, green LED on, beeper
on, keypad backlight on) to verify that all hardware is working properly.
6. Tap OK to return to the main demo.
7. Tap options > symbology config.
8. Tap enable all to let the scanner decide the best method of decoding the barcode.
9. Tap OK to return to the main demonstration screen.
10. Point the scanner at a barcode, and press any of the three barcode scan buttons on the device (left/right trigger
or center scan button). The results will display after you achieve a successful scan.
Page 7 XP Series Quick Start Guide
XP Series Quick Start Guide
The CE Mark on the product indicates that the system has been tested to and conforms with the provisions
noted within the 89/336/EEC Electromagnetic Compatibility Directive.
For further information, please contact:
Janam Technologies LLC
100 Crossways Park West, Suite 105
Woodbury, NY 11797
Janam Technologies shall not be liable for use of our product with equipment (i.e., power supplies, personal
computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive.
FCC and Canadian Compliance
XP Series mobile computers meet or exceed all applicable standards and have been manufactured to the highest
level of quality. To see the specific labels associated with RF terminals configurations, visit www.janam.com.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user authority to operate the equipment.
XP Series Batch Terminal
Regulatory and Safety Approvals
Parameter Specification
U.S.A. FCC Part 15 Subpart B
Canada ICES-003 Issue 4
European Community EN55022:1998+A1: 2000+A2:2003
EN55024:1998+A1: 2000+A2:2003
Australia AS/NZS CISPR 22:2004
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Page 8
Getting Started
This Class B digital apparatus complies with the Canadian ICES-003.
Cet appareil numerique de la Class B est conforme a la norm NMB-003 du Canada.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
L’utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne doit pas produire de
brouillage, et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce
brouillage est susceptible de compromettre le fonctionnement du dispositif.
XP Series RF Terminals with WLAN and/or Bluetooth
RF, Regulatory and Safety Approvals
Parameter Specification
RF Approvals
U.S.A. FCC Part 15 Subpart C and Subpart B
Canada RSS 210 Issue 6
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 9 XP Series Quick Start Guide
Autres manuels pour XP series
2
Table des matières
