Ives Offset Top Pivot 7215/15F Manuel utilisateur

7212, 7215/15F, 7222, 7226/26F, and 7227/27F

3/4” Offset Top Pivot

Improper pivot set installation can lead to personal injury or property damage. Follow

all instructions carefully. For questions contactTechnical Support at 1-888-371-7331.

CAUTION

1. Prepare and mortise top of door and head jamb to receive pivot set. Determine pivot location

using dimensions on reverse side. The pivots are non-handed.To determine hand of door

and proper pivot position, see diagrams above.

2. Locate, drill, and tap 1/4-20 mounting holes for metal door or metal frame. Locate and drill

pilot holes for #14 wood screws for wood door or wood frame. Install pivot leafs with 1/4-20 x 3/4”

FHMS or #14 FHWS screws provided.

3. Loosen set screw in pin leaf with 3/32” Allen wrench provided and remove pivot pin.

4. Use 5/32” Allen wrench to remove pivot cap from door leaf, allowing for pivot pin re-insertion.

5. With door in open position (about 90° to jamb), carefully fit door onto bottom pivot at a slight

angle.Tip door into vertical position, aligning top pivot leafs in door and jamb. With pivot

leafs aligned, insert pivot pin into pivot set. Vertically align groove in pivot pin with set

screw in pivot leaf. Tighten set screw securely with 3/32” Allen wrench. Re-install pivot cap.

6. To remove door from jamb: Remove pivot cap. Thread a 1/4-20 machine screw into end of

pivot pin. Pull pivot pin out of pivots. Door can now be removed from opening.

Right hand

installation

Lefthand

installation

Pin leaf

Bearing

leaf

Pivot

pin Pivot cap

5/32” Allen wrench

Bearing leaf

Set screw

3/32” Allen wrench

Pin leaf

1/4-20 tapped hole for

pin removal (both ends)

Installation Instructions

26672 Rev. 4

It is very important for installer to verify that center line of top pivot point lines up

with center line of bottom pivot point before final installation. Heel edge of door

must be beveled 1/8” in 2” as shown below. The bottom pivot set should be

mounted first in most installations.

NOTE

Mortise depth for pivot leafs is 1/4”.

NOTE

These dimensions apply to industry standard

1-3/4”doorina1-15/16”rabbetedframe.For

other frame conditions, locate frame leaf of

pivot identical to door leaf as shown below.

3/4”

19 mm 15/16”

24 mm 1/8”

3 mm

typ

1/16”

2 mm

typ

Frame Leaf

7/8”

22 mm

11/16”

17 mm

Door Leaf

Bevel heel edge of

door 1/8” in 2” with

3/16” rad, typ

26672-00

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Ives Porte

Ives

Ives Magnetic Catch 326 Manuel utilisateur

Ives

Ives Pull Plate 8311 Manuel utilisateur

Ives

Ives Utility Pull 26 Manuel utilisateur

Ives

Ives SRT Manuel utilisateur

Ives

Ives 112HD Series Manuel utilisateur

Ives

Ives 495 Manuel utilisateur

Ives

Ives Mail Slot Sleeve C600 Manuel utilisateur

Ives

Ives 55 Manuel utilisateur

Ives

Ives Pocket Pivot 91105F Manuel utilisateur

Ives

Ives Offset Top Pivot 7244F Manuel utilisateur

Ives

Ives Flush Knob Pull 428 Manuel utilisateur

Ives

Ives 671 Manuel utilisateur

Ives

Ives Bottom Center Pivot 7255J Manuel utilisateur

Ives

Ives 660 Manuel utilisateur

Ives

Ives Security Surface Bolt 454 Manuel utilisateur

Ives

Ives Casement Operator 394 Manuel utilisateur

Ives

Ives 481 Manuel utilisateur

Ives

Ives Offset Top Pivot 7245F Manuel utilisateur

Ives

Ives Surface Bolt 353 Manuel utilisateur

Ives

Ives 780 Manuel utilisateur

Ives

Ives Surface Bolt 144 Manuel utilisateur

Ives

Ives Top Center Pivot 7253 Manuel utilisateur

Ives

Ives Flush Pull 22 Manuel utilisateur

Ives

Ives Surface Bolt 43 Manuel utilisateur

Manuels Porte populaires d'autres marques

ENFORCER

ENFORCER Enforcer SK-990A Manuel utilisateur

Electri-Chef

Electri-Chef TR18 Manuel du propriétaire

BEA

BEA PBR45x Manuel utilisateur

GE 19298 Manuel utilisateur

Sterling Plumbing

Sterling Plumbing Frameless Bypass Shower Door SP5465-45 Manuel utilisateur

GE 19214 Manuel utilisateur

Algoma Hardwoods

Algoma Hardwoods STC 39 Manuel utilisateur

Therma-Tru

Therma-Tru Double-door Manuel utilisateur

Erreka

Erreka PREMIS 200 Manuel utilisateur

Lennox Hearth Products

Lennox Hearth Products MPB-35 Manuel utilisateur

KitchenAid

KitchenAid KBAU181V Manuel

American Standard

American Standard Acrylux 6000Y1.BE5 Manuel utilisateur

Albany

Albany RCA L Manuel utilisateur

RYTEC

RYTEC Pharma-Roll Manuel utilisateur

BEA

BEA 80.0068.03 Manuel utilisateur

Open House

Open House H580 Manuel utilisateur

NuTone

NuTone C905 Manuel utilisateur

American Standard

American Standard Pivot 3232.STE2 Manuel utilisateur