Ivation IVAPPW50 Manuel utilisateur
Portable High Pressure Washer
SKU: IVAPPW50
User Guide
®
INTRODUCTION
2
INTRODUCTION
Thank you for purchasing the Ivation® Portable High
Pressure Washer. This User Guide is intended to
provide you with guidelines to ensure that operation
of this product is safe and does not pose risk to the
user. Any use that does not conform to the guidelines
described in this User Guide may void the limited
warranty.
Please read all directions before using the product
and retain this guide for reference. This product is
intended for household use only. It is not intended for
commercial use.
This product is covered by a limited one-year
warranty. Coverage is subject to limits and exclusions.
See warranty for details.
3
TABLEOF CONTENTS
INTRODUCTION
TABLE OF CONTENTS
SAFETY PRECAUTIONS
PACKAGE CONTENTS
PRODUCT OVERVIEW
ASSEMBLY INSTRUCTIONS
TABLE OF CONTENTS
OPERATING INSTRUCTIONS
CARE & MAINTENANCE
TROUBLESHOOTING
WARRANTY
GET IN TOUCH!
2
3
4
5
5
6
9
10
11
12
14
15
SPECIFICATIONS
4
SAFETY PRECAUTIONS
WARNING! Please read and understand all safety precautions and
operating instructions before operating this appliance. Improper
usage of the product can result in damage to the product or
serious injury to the user.
Battery Pack Safety
•WARNING: CHOKING HAZARD – Small parts. This product contains
small parts and is not suitable for children under 3 years old.
•Properly dispose of all packing materials immediately after unpacking
product, as the bags used for packaging could present a suocation or
choking hazard.
•This unit is not a toy. Keep it out of reach of children.
•Use only accessories and replacement parts recommended by the
manufacturer.
•Do not use chlorine-based cleaners or detergents.
•Do not use the product if parts are damaged or missing.
•Do not attempt to disassemble or alter the product.
•Always store product indoors.
•Do not point the washer towards people or pets.
•Keep the nozzle of the washer free from obstruction. Do not use
washer when nozzle is clogged.
•Do not freeze the device. Freezing the washer may damage the
pump or water lines.
•Using improper voltage may result in damage to the motor and/or
possible injury to the user. Proper voltage is listed on the battery’s plate.
•Use water at temperatures between 32 °F – 104 °F (0 °C – 40 °C) only.
•Do not operate the product when under the influence of alcohol or drugs.
•Do not use the washer when the battery pack or hose is damaged.
•Do not store the battery at high temperature for an extended
period of time.
•Do not store the battery around sharp, fine metal wires or pins. These
materials may touch both terminals of the battery and cause it to short
circuit which could lead to a burnout or explosion.
•Store the battery in a dry, cool, and well-ventilated place that is
protected from direct sunlight.
•If not regularly used, be sure to charge the battery at least every
three (3) months.
SAFETY PRECAUTIONS
5
PACKAGE CONTENTS
Motor base
Adjustable nozzle
Extension spray rod
Suction hose
Detachable battery pack
Battery charger
Flashlight attachment
Flashlight holder
Washer case
User guide
PRODUCT OVERVIEW/ PACKAGE CONTENTS
PRODUCT OVERVIEW
A
B
C
D
E
F
G
H
I
J
A
B
CD
E
F
G
H
J
I
ASSEMBLY INSTRUCTIONS
6
ASSEMBLY INSTRUCTIONS
1. Connect the adjustable nozzle to the motor base.
2. Tighten the adjustable nozzle to lock it in place.
To attach the adjustable nozzle:
1. Connect the extension spray rod to the motor base.
2. Tighten the extension spray rod to lock it in place.
3. Then, connect the adjustable nozzle to the extension spray rod
and tighten nozzle in place.
To attach the extension spray rod:
Connecting the Adjustable Nozzle or Extension Spray Rod
7
ASSEMBLY INSTRUCTIONS
1. Locate the flashlight holder and slide it on top of the washer
until it snaps in place.
2. Open the casing of the flashlight attachment to reveal the
battery compartment.
3. Place three (3) AAA batteries (not included) into the compartment.
Then, close the casing.
4. Mount the flashlight attachment onto the holder.
5. Next, slide the battery pack onto the bottom of the motor device
until it clicks in place.
NOTE: To remove the battery pack, hold the washer firmly with one hand and use
the other hand to push up on the battery then slide it off.
Connecting the Flashlight, Battery Pack, and Hose
ASSEMBLY INSTRUCTIONS
8
ASSEMBLY INSTRUCTIONS
6. Push down on the connector cover to reveal tabs on connector. Then, attach
hose connector to the bottom of the motor base until it clicks in place.
7. Put the other end of the suction hose in any full water tank or reservoir.
NOTE: This washer is commonly used with water, but can be used with other
cleaning fluids that are not corrosive or caustic. Harsh and corrosive cleaners and
detergents should not be used with this device.
ASSEMBLY INSTRUCTIONS
OPERATING INSTRUCTIONS
9
OPERATING INSTRUCTIONS
1. Hold the washer firmly with one hand. Use the other hand to press and hold
the UNLOCK/LOCK button. While the button is held, slowly squeeze down on the
trigger to use the washer.
2. Turn the dial on the adjustable nozzle counterclockwise to get a straight stream
spray. Turn the dial clockwise to get a fine mist fan.
3. Slowly release the trigger to stop spray. The UNLOCK/LOCK button will
automatically push out and lock washer when trigger is released.
Operating the Washer
CARE & MAINTENANCE
10
CARE & MAINTENANCE
1. While the UNLOCK/LOCK button is held, slowly squeeze down on the
trigger to use the washer. Then, take suction hose out of the water.
2. Continue to squeeze trigger to relieve pressure from nozzle. After a few
seconds, release the trigger.
3. Detach the nozzle from the washer then unlock and squeeze the
trigger again. Squeeze the trigger for a few seconds to let remaining
water come out.
4. Detach suction hose from the washer. Then, allow remaining water to
drain out of the hose.
Draining Water from Washer
1. Pour about 0.8 gal (3 L) of antifreeze into a water tank.
2. Attach the battery pack, nozzle, and suction hose to the washer.
3. Unlock the trigger and squeeze it until a steady stream of antifreeze comes out.
4. Release and lock the trigger when finished.
Adding Antifreeze
1. Detach battery pack from the washer.
2. Connect the battery pack to the battery charger. Then, connect the charger
to a power outlet.
NOTE: Battery will charge for about 3.5 - 4 hours to reach full charge. Make sure
to charge the battery before and after using the spray gun for the best performance.
Charging the Battery
1. Follow steps in the “Draining Water from Washer” section.
2. Then, run fresh water through the washer before using.
To Remove Antifreeze:
Table des matières
Autres manuels Ivation Nettoyeur haute pression
