iTOOLco CANNON 6K Manuel utilisateur
User’s Guide
1325 CARDEN FARM DR | CLINTON, TN 37716 | 865.483.2040 | ITOOLCO.COM
© 2020 PROPERTY OF ITOOLCO
ITOOLCO CANNON 6K USER’S GUIDE
2007C6KUG
Page | 2
BEFORE OPERATION OF THIS TOOL, READ AND
UNDERSTAND ALL OF THE INSTRUCTIONS AND
SAFETY INFORMATION IN THIS MANUAL
Contents
SAFETY FIRST ................................................................................................................................................ 3
SAFETY ALERT SYMBOLS ............................................................................................................................... 3
IMPORTANT SAFETY INFORMATION ............................................................................................................ 4
DESCRIPTION AND IDENTIFICATION ............................................................................................................. 6
SET UP AND OPERATION ............................................................................................................................ 10
Assembly ................................................................................................................................................ 10
Attaching Conduit Adapters ................................................................................................................... 11
Underground Wire Pull .......................................................................................................................... 12
Overhead Wire Pull ................................................................................................................................ 13
Receiver Hitch Wire Pulls ....................................................................................................................... 14
Maintenance .......................................................................................................................................... 15
LIMITED WARRANTY: ITOOLCO CANNON 6K ............................................................................................. 16
ITOOLCO CANNON 6K USER’S GUIDE
2007C6KUG
Page | 3
SAFETY FIRST
Safety is essential in the use and maintenance of this tool. This instruction manual and any
markings on the tool provide information for avoiding hazards an unsafe practices related to
the use of this tool. Observe all of the safety information provided.
SAFETY ALERT SYMBOLS
This symbol is used to call your attention to hazards or unsafe practices that could result in
injury or property damage. The three signal words, defined below, indicate the severity of the
hazard. The message after the signal word provides the information for preventing or avoiding
the hazard.
DANGER
Immediate hazards that, if not avoided, WILL result in severe
injury or death.
WARNING
Hazards that, if not avoided, COULD result in severe injury or
death.
CAUTION
Hazards or unsafe practices that, if not avoided, MAY result in
injury or property damage.
ITOOLCO CANNON 6K USER’S GUIDE
2007C6KUG
Page | 4
IMPORTANT SAFETY INFORMATION
WARNING
Read and understand all instructions and safety information in
this manual before operating or servicing this tool.
Also read the instruction manual supplied with your drill.
FAILURE TO OBSERVE THESE WARNINGS CAN RESULT IN SEVERE
INJURY OR DEATH
WARNING – PERSONAL SAFETY HAZARDS
Only qualified persons should use iTOOLco Cannon 6K.
Wear eye protection and hard hat when using this tool.
Do not use this tool while tired or under the influence of drugs,
alcohol, or medication.
Keep body parts and loose clothing away from moving parts.
Always follow operating procedures.
FAILURE TO OBSERVE THESE WARNINGS CAN RESULT IN SEVERE
INJURY OR DEATH.
WARNING – ELECTRICAL SHOCK HAZARDS
Do not expose power tools to rain or wet conditions. Water
entering a power tool can increase the risk of electric shock.
Plug into a (GFCI) ground fault interrupted circuit outlet only.
Use a 20 Amp 120 Volt extension cord no more than 100 feet in
length. Maintain proper care of power cords. Do not use the
cord to carry the tool or pull the plug from an outlet. Replace
damaged cords immediately. Damaged cords can increase the
risk of electrical shock. Do not use this tool near live circuits.
Shut off and lock out power when working near existing
circuits. FAILURE TO OBSERVE THESE WARNINGS CAN RESULT
IN SEVERE INJURY OR DEATH.
ITOOLCO CANNON 6K USER’S GUIDE
2007C6KUG
Page | 5
WARNING – ENTANGLEMENT HAZARD
Do not operate this tool while wearing loose-fitting clothing.
Retain long hair.
Keep hands away from pullers capstan. Rope at capstan can
pinch or crush a hand or body part.
FAILURE TO OBSERVE THESE WARNINGS CAN RESULT IN SEVERE
INJURY OR DEATH.
WARNING – TIPPING HAZARD
Use the same size adapter with conduit. Lock adapter under
conduit nut. Disassemble when not in use. FAILURE TO
OBSERVE THESE WARNINGS CAN RESULT IN SEVERE INJURY OR
DEATH.
WARNING – TOOL USE HAZARDS
Use this tool for manufacturer’s intended purpose only. Use
other than that which is described in this manual can result in
injury or property damage.
Do not use nylon or polypropylene rope. Extreme force can be
stored when rope stretches. Inspect all aspects of the wire pull
to ensure safety.
Inspect all aspects of the wire pull to ensure safety.
Only qualified personnel should use pulling equipment.
Do not use the cable puller as a hoist or winch. The cable puller
cannot lower a load. The load may fall and cause serious injury
or death.
FAILURE TO OBSERVE THESE WARNINGS CAN RESULT IN SEVERE
INJURY OR DEATH.
ITOOLCO CANNON 6K USER’S GUIDE
2007C6KUG
Page | 6
DESCRIPTION AND IDENTIFICATION
The IToolco Cannon 6K is a 6,000 lb. cable puller intended to pull small to medium wire through
conduit. It sets up in only minutes, and is a dual capstan, four-speed puller. The Cannon 6K can pull at
speeds from 8 to 70 feet per minute. It does not need to be anchored to the ground, and is easy for
one person to set up, transport, and operate.
ITOOLCO CANNON 6K USER’S GUIDE
2007C6KUG
Page | 7
ITOOLCO CANNON 6K USER’S GUIDE
2007C6KUG
Page | 8
ITOOLCO CANNON 6K USER’S GUIDE
2007C6KUG
Page | 9
ITOOLCO CANNON 6K USER’S GUIDE
2007C6KUG
Page | 10
SET UP AND OPERATION
Assembly
1. Always wear gloves, eye protection, and appropriate safety gear when working with wire pullers.
2. Remove iTOOLco Cannon 6K Puller from shipping crate.
3. iTOOLco Cannon 6K is designed to be used with a drill motor, Milwaukee #1680-20.
4. Plug in the foot switch to the 120 Volt power supply and the C6K puller.
5. Make sure the motor is set to forward. Test the C6K by stepping on the foot switch. For pulling the
capstans should rotate so that the rope starts over the top. (not under the bottom) and wraps are
added accordingly.
6. To start, set the speed switch (located on the motor) to low.
7. Use the low speed capstan to start the pull. Use 1 to 3 wraps of rope around the capstan. Use the
rope roller guide and always stand to the side of the puller.
8. Step on the foot switch and begin to take up the slack in the rope.
9. Once the wire head has entered the conduit you may determine at which speed to pull the wire.
10. If a higher speed is desired, switch speeds on the motor by releasing the foot switch. Once the puller
has stopped, rotate the speed switch to high, and /or move the rope to the high speed capstan.
11. Complete the wire pull.
Table des matières
Manuels Électricité industrielle populaires d'autres marques
Murata
Murata GJM0335C1E4R4BB01 Series Manuel utilisateur
Stahl
Stahl 8575/12 Manuel utilisateur
SI
SI Pegasus Manuel utilisateur
Murata
Murata GRM1555C1H2R7CA01 Seies Manuel utilisateur
Murata
Murata GRM0225C1E6R4BA03 Series Manuel utilisateur
Cooper Power Systems
Cooper Power Systems VXE15 Manuel utilisateur
S&C
S&C Vista SD Manuel utilisateur
Murata
Murata GRM0335C2A7R3CA01 Series Manuel utilisateur
Siemens
Siemens 3VA9988-0BM10 Manuel utilisateur
Siemens
Siemens SITRANS LVS100 Manuel utilisateur
Murata
Murata GRM32ER60G227ME05 Series Manuel utilisateur
Siemens
Siemens SENTRON SUPERSWITCH 3KL82 Series Manuel utilisateur