ITL RLC-200-UNI Manuel utilisateur
Toll Free: +1 (866) 624-8309 www.itl-llc.com
Installation
and
Operation
Manual
RLC-0200-UNI
Universal
LED & Incandescent
A-0 Controller
RLC-200
DOC-RLC200-MNL Rev8.doc (6/13/2017) Copyright 1999-2017 ITL, LLC Page 2 of 15
Front Matter
Copyright & Trademarks
Copyright © 1999-2017 by ITL, LLC. All rights reserved. This document contains
proprietary information, photographs, graphics, and other material (collectively, "the
Content") protected by copyright, and this manual and all accompanying hardware,
software and documentation are copyrighted. No part of this document may be
photocopied or reproduced by mechanical, electronic, or other means in any form without
written consent of ITL, LLC.
ITL, LLC and the ITL logo are trademarks of ITL, LLC. All other trademarks and brand
names are the property of their respective proprietors.
Limited Warranty and Disclaimer
ITL, LLC guarantees that every RLC-200 series controller is free from physical defects of
material and workmanship under normal use for one (1) year from the date of purchase.
If the product proves defective during this warranty period, please contact ITL, LLC in
order to obtain a Return Authorization Number, RMA.
In no event shall ITL, LLC’s liability exceed the price paid for the product from direct,
indirect, special, incidental, or consequential damages resulting from the use of the
product, its accompanying software, or its documentation. ITL, LLC makes no warranty
or representation, expressed, implied, or statutory, with respect to its products or the
contents or use of this documentation and all accompanying software, and specifically
disclaims its quality, performance, merchantability, or fitness for any particular purpose
unless otherwise stated.
The technical documentation is being delivered to you AS-IS. ITL, LLC makes no
warranty as to its accuracy or use. Any use of the technical documentation or the
information contained therein is at the risk of the user. Documentation may include
technical or other inaccuracies or typographical errors. ITL, LLC reserves the right to
revise or update its products, software, or documentation without obligation to notify any
individual or entity.
Please send any comments regarding the manual to [email protected].
RLC-200
DOC-RLC200-MNL Rev8.doc (6/13/2017) Copyright 1999-2017 ITL, LLC Page 3 of 15
Safety Warning
This equipment uses lethal voltages which can cause serious injury and/or death. Do not
attempt to service this equipment with line power applied.
Do not rely on interlock switches to remove lethal voltages from the system. Measure for
voltages using a voltmeter to ensure that power is off and has been completely removed.
Do not wear any jewelry. Gold and silver are excellent conductors of electricity.
RLC-200
DOC-RLC200-MNL Rev8.doc (6/13/2017) Copyright 1999-2017 ITL, LLC Page 4 of 15
Table of Contents
Front Matter ....................................................................................................................... 2
Copyright & Trademarks ................................................................................................ 2
Limited Warranty and Disclaimer ................................................................................... 2
Safety Warning .............................................................................................................. 3
Introduction ........................................................................................................................ 5
Product Description ........................................................................................................... 5
Specifications .................................................................................................................... 6
Environment ................................................................................................................... 6
Obstruction Lights .......................................................................................................... 6
Mechanical ..................................................................................................................... 6
Electrical ........................................................................................................................ 6
Installation ......................................................................................................................... 7
Unpacking your RLC-200 Controller .............................................................................. 7
Quick Installation Guide ................................................................................................. 7
RLC-200 Controller Mounting ........................................................................................ 8
Electrical Connections ................................................................................................... 9
Connector Descriptions ................................................................................................ 10
Setup and Operation ....................................................................................................... 11
Configuration Jumpers ................................................................................................. 12
Configuration Switches ................................................................................................ 12
Marker Alarm Setting ................................................................................................... 13
Manual Mode Select Switch ......................................................................................... 13
Indicator Lights............................................................................................................. 13
Spare Parts & Replacement Parts ................................................................................... 14
Technical Support and Contact Info ................................................................................ 15
Contact Info ................................................................................................................. 15
RMA ............................................................................................................................. 15
RLC-200
DOC-RLC200-MNL Rev8.doc (6/13/2017) Copyright 1999-2017 ITL, LLC Page 5 of 15
Introduction
Congratulations! You have purchased one of the most advanced control solutions for red
LED and incandescent obstruction lighting systems available today. This product is the
result of many years of engineering with extensive input from field service personnel.
Please take the time to read and familiarize yourself with this manual. It contains the
information necessary to install, test and troubleshoot the RLC-200.
Product Description
The RLC-200 is capable of controlling up to five FAA type L-810(L) red LED or FAA type
L-810 incandescent markers. Individual alarm relays are provided for indication of marker
alarm, and system mode. Virtually all information necessary for installation and operation
of the RLC-200 is available on the “quick info” card located in the door of the enclosure.
.
RLC-200-UNI
RLC-200
DOC-RLC200-MNL Rev8.doc (6/13/2017) Copyright 1999-2017 ITL, LLC Page 6 of 15
Specifications
Designed to comply with AC 150/5345-43 and ICAO Annex14
Environment
Temperature -40ºC to +55ºC
Humidity less than 95% relative humidity (non-condensing)
Obstruction Lights
Side Lights Up to Five Incandescent
116W, 120 Vac or
100W, 230 Vac
Up to Five LED
ITL MKR-LTE1-000, MKR-LTE1-0IR or
Other 7W LED markers lights
Mechanical
Dimension Height: 12.00” (305mm)
Width: 8.81” (224mm)
Depth: 7.00” (178mm)
Weight 8 lbs (3.6Kg)
Electrical
Input Power 120/230 VAC at 50/60Hz, 6VA
Alarm Relays: 120/230 VAC, 1 Amp
PEC: 120/230 Vac, 50/60 Hz, 1 VA
Suppression 320 Joule, 275V, Input Power,
Side Lights & PEC
23 Joule, 275V, All alarm relays
RLC-200
DOC-RLC200-MNL Rev8.doc (6/13/2017) Copyright 1999-2017 ITL, LLC Page 7 of 15
Installation
The following section describes how to install the RLC-200 controller. The Obstruction
Lights (markers) should be installed according to the manufacturer’s instructions.
Unpacking your RLC-200 Controller
Please examine the shipping containers and their content thoroughly upon receipt and
report any potential shipping damage to the carrier.
Quick Installation Guide
The quick start guide shows how to install the RLC-200 controller.
Remove RLC-200 controller from packaging material.
Mount the RLC-200 enclosure.
Install FAA type L-810 incandescent or FAA type L-810(L) LED obstruction lights
per manufacturer’s instruction and FAA requirements.
Install cable from RLC-200 to L-810 obstruction lights (markers) per
manufacturer’s instructions.
Install Photoelectric Cell and socket (ITL P/N: PEC-1800-120, PEC-SOCK-000).
Install 120Vac line power to the RLC-200 Controller.
RLC-200
DOC-RLC200-MNL Rev8.doc (6/13/2017) Copyright 1999-2017 ITL, LLC Page 8 of 15
RLC-200 Controller Mounting
RLC-200
DOC-RLC200-MNL Rev8.doc (6/13/2017) Copyright 1999-2017 ITL, LLC Page 9 of 15
Electrical Connections
All electrical control connections are made on P1, P2 and P4 located at the bottom of the
controller. Connections for alarm relays are made on P5 and P6 located on the right side
of the controller. Typical connections for a 120VAC system are shown below.
It is the responsibility of the installer to comply with all applicable local,
state, and federal regulations for installation and operation of this device.
RLC-200
DOC-RLC200-MNL Rev8.doc (6/13/2017) Copyright 1999-2017 ITL, LLC Page 10 of 15
Connector Descriptions
Connector Descriptions
Connector Terminals Function
P1 L1
N
Input Power Line Voltage
Input Power Neutral
P2 PRI
N
SEC
Primary Obstruction Lights
Power Supply Neutral
Secondary (backup) Obstruction Lights
P4 BLK
WHT
RED
Photoelectric Cell Line Power
Photoelectric Cell Neutral
Photoelectric Cell Signal (120Vac=Night, 0Vac=Day).
Table des matières
Autres manuels ITL Contrôleurs
