Itek ITMF27V075FHD Manuel utilisateur

2. Maintenance Guidelines

Product Overview

S a a it nd Inst llat on5.

ITMF27V075FHD User Manual

Table Of Contents

Connectivity Options

Basic Operation

Indicator Light

OSD

10.

Technical Specifications11.

Safety Precautions1.

Box Contents

Mount Installation

For more information please visit our web site or write us an email:

https://www.itekevo.com

info@itekevo.com

Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per iTek GWF 27

ITMF27V075FHD o cerca il tuo prodotto tra le migliori offerte di Monitor

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United

States and other countries.

Eng-1

1. Safety Precautions

WARNING:Safety Instructions

Do not place the monitor in rain,humid environment or open the monitor case to

avoid any shock, electrical hazards,and/or mechanical hazards.

Oper ation

• Keep the monitor out of direct sunlight and away from stoves or any other heat

source.

• Keep the monitor out of water source.

• Remove any object that could fall into ventilation holes or prevent proper

cooling of the monitor’s electronics.

• Do not block the ventilation holes.

• Do not knock or drop the monitor during operation or transportation.

• To clean your screen, slightly dampen a soft, clean cloth with water, If possible,

use a special screen-cleaning tissue or solution. Do not use benzene, thinner,

ammonia, abrasive cleaners, or compressed air.

• Use a slightly dampened, warm cloth to clean the frame. Avoid using detergent

of any kind as some detergents might leave a milky film on the plastics.

• Unplug the monitor if you are not going to use it for an extended period of time.

• To avoid the risk of shock or permanent damage to the set, do not expose the

monitor to dust, rain, water, or excessive moisture environment. If your monitor

gets wet, wipe it with dry cloth as soon as possible.

Caring For Your Monitor

Before cleaning the monitor, unplug the monitor power cable from the electrical

outlet.

CAUTION

2. Maintenance Guidelines

Monitor x 1 Stand Stem x 1 Stand Base x 1

Screws x 7

User Manual x 1Power Adapter x 1

HDMI Cable x 1Mount adapter

(For Wall Mounting)

3. Box Contents

Eng-2

2. Maintena nce Gu idel ines

Product Overview

S a a it n d Inst llaton5.

ITMF24V075FHD User Manual

Table Of Contents

Connectivity Opt ions

Basic Operation

Indicator Light

OSD

10.

ECO Modes and Gameplus Switching

11.

Safety P reca ution s1.

12.

Box Contents

Technical Specifications

Mount Installation

For mor e inf orma tio n ple ase visit o ur web site o r wr ite u s an e mail:

http s://www. itekevo. com

info@it ekevo.com

7 8

4. Product Overview

4.1 – Monitor Buttons

Rocker switch button: Press to turn on or turn off the monitor.

Left rocker button: Push the rocker left to exit OSD menu.

Down rocker button: Push the rocker down to move down in menus.

Right rocker button: Push the rocker right to enter sub-menus/ quickly enter the main menu.

Up rocker button: Push the rocker up to move up in menus.

HDMI Connectors: Insert one end of the HDMI cable into the computer’s HDMI

output and connect the other end to the monitor’s HDMI port.

VGA Connectors: Insert one end of the VGA cable into the VGA output device

and connect the other end to the monitor's VGA port.

Audio Output: Insert one end of the Audio cable into the computer’s Audio output

to receive the Audio signals from your monitor.

Power Connector: Insert the power Cable to supply power to the monitor.

4.2 – Monitor Ports

Eng-3

5. Stand lnstallation

Eng-4

2. Remove the upper foam cover and put it aside, take out the monitor film bag and

put the monitor in the lower foam cover.

1. Open the package to take out foams and put them on a flat tabletop.

3. Take out the stand, install it on the rotary shaft of the monitor and tighten them with

2 screws.

Upper foam cover

Lower foam cover

Base

Stand stem

Screws

1. Open the package to take out foams and put them on a flat tabletop.

5. Grasp the bracket with your hands to stand up the machine.

During the process of erecting the machine, do not directly pinch the screen

with your hands to prevent the screen from breaking.

Mount Installation

Eng-5

4. Take out the base, align it with the bottom of the stand and tighten them with 2 screws.

Screws

Upper foam cover

Lower foam cover

Base

Stand stem

Connect the included power adapter to the power connector, and then plug the other

end into an wall outlet.

3. Do not pinch the screen directly with your hands during the process of hanging the

product to prevent the screen from breaking.

Wall bracket

Wall adapter

7. Connectivity Options

7.1

–

Connecting the Power Cable

Eng-6

Do not place or hang any object on the mount, and the using height of the mount should be less than 2 meters.

2. Remove the upper foam cover and put it aside, take out the monitor film bag, and

put the monitor in the lower foam cover. Take out the mount adapter and 2 screws

and tighten the mount adapter with 2 screws.

Screws

mount adapter

Monitor

In order for the monitor to receive VGA signals from the computer, use the VGA cable

to connect the monitor to the computer.

7.3 – VGA Connectivity

VGA Cable (Not Included)

VGA OUTPUT

In order for the monitor to receive HDMI signals from the computer, use the HDMI

cable to connect the monitor to the computer.

7.4 – HDMI Connectivity

HDMI OUTPUT

HDMI Cable(Included)

Eng-7

7.2 – Connecting Your Earphones

Plug in your earphones to receive audio signals from your monitor. If your earphones

are connected to the monitor and audio devices are connected to your computer at the

same time, the audio devices will not produce sound. Earphones and other audio

devices not included.

Earphones(Not included)

8. Basic Operation

Adaptive-Sync

This feature is off by default. To activate, you must have hardware with Adaptive-Sync capa-

bility, a DP or HDMI cable, and the latest graphic drivers. After connecting your computer and

monitor with a DP or HDMI cable, you may receive a prompt to enable the feature on your

computer. If you do not, you may need to enable the function in your graphics card menu.

See your graphics card manufacturer’s documentation for instructions.

1. Insert one end of the HDMI cable into your PC's graphics card. A VGA cable may

also be used.

2. Connect the other end of the cable to the corresponding connector on your monitor.

3. Connect the power cable to your monitor then connect the other end to your power

source. It is recommended that you use a surge protector with adequate voltage if

a wall outlet cannot be reached directly.

4. Locate the power button on the monitor and press it to turn on the monitor.

Audio OutputHDMI Connector

VGA Connector

Steady blue light indicates the power is on and the monitor runs normally. Red light indicates no

video source and no horizontal or vertical signal detected or low voltage. Please make sure that

your computer is turned on and all video cables are fully plugged in and/or connected.

9. Indicator Light

Indicator Light

Eng-8

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Itek Moniteur

Itek

Itek ITMF27I104QHD Manuel utilisateur

Itek

Itek GGC Series Manuel utilisateur

Itek

Itek ITMF40I141WQHD Manuel utilisateur

Itek

Itek ITMF24/105FHD Manuel utilisateur

Itek

Itek ITMC27V241QHD Manuel utilisateur

Itek

Itek ITMC27V161QHD Manuel utilisateur

Itek

Itek ITMC34V141WQHD Manuel utilisateur

Itek

Itek ITMF27I105QHD Manuel utilisateur

Itek

Itek ITMF24I281FHD Manuel utilisateur

Itek

Itek ITMC27V241FHD Manuel utilisateur

Itek

Itek GGF Series Manuel utilisateur

Itek

Itek ITMF44A121DFHD Manuel utilisateur

Itek

Itek ITMF28I141UHD Manuel utilisateur

Itek

Itek ITMF30V104FHD Manuel utilisateur

Itek

Itek ITMF22V075FHD Manuel utilisateur

Itek

Itek ITMF24I361FHD Manuel utilisateur

Itek

Itek ITMF24T061FHD Manuel utilisateur

Itek

Itek GGC 34 Manuel utilisateur

Itek

Itek ITMF28I065UHDC Manuel utilisateur

Itek

Itek ITMC32V241FHD Manuel utilisateur

Itek

Itek ITMF24T161FHD Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation