4.3 Master volume control
To control the volume for a defined group of inputs (e.g. all microphones), the
„Master-Volume“ control could be used.
This group depends on your individual device setting.
Following inputs of your device are controlled by the „Master-Volume“ Control:
.................. .................. .................. .................. .................. ................
Turn the controller for volume adjustment
clockwise: : turn up the sound
counterclockwise: turn down the sound
Hint: Input channels which are muted by touch screen operation are displayed with
inverted naming labels. They are not affected by the master volume control. Only a
touch screen operation could release this input channel.
4.4 Start volumes
The start volumes for a specific configuration are predefined by programming a
specific configuration via PC software POWERDESIGN.
On the left side of each slider there is a little arrow which marks the start volume
setting. Thus the user can always see the start volume of the active configuration.
In some cases it could be necessary to modify this start volumes without a connected
PC. In the system menu of the device (see section 5.2) there is the entry “Save
Config” which allows to save the actual configuration permanent into the device.
Following approach is necessary to save the actual configuration settings:
-Choose the configuration to be modified (e.g. „Standard“).
-adjust the desired volume levels.
-Press the “Menu” button and press the symbol. Chose „System“ /
„Save Config“.
-To avoid an unauthorized or unintentionally access you have to input a
security code.
The code for your device is:
After correct input of the security code you can hear a beep. The modified
configuration is successfully saved and your device will start with this settings.
Fig. 7Master volume control
