Iseo V364 Manuel utilisateur
V364 Demo Kit
User Manual - Manuale Utente
EN - IT 02
2
ENGLISH
• Introduction ....................................... 4
• Quick Start ........................................ 5
• System’s description .......................... 8
• Router and Atlas configurations........... 12
ITALIANO
• Introduzione....................................... 14
• Per iniziare ........................................ 15
• Descrizione del sistema...................... 18
• Configurazione Router e Atlas.............. 22
3
V364 Demo Kit
User Manual
4
Introduction
V364 Demo Kit is born to show and explain the V364 System from the end-user point of
view. The system is rapresented by a real installation scenario, that offers the opportunity to
interact with all the elements belonging to the system: software, credentials, online reader/
writer units (also called validators), and the ofine devices.
There are 2 type of products available:
•V364 Demo Kit F9000
•V364 Demo Kit RFID
The V364 Demo Kit F9000 shows a plant with mechatronic technology (F9000 system), with
mechatronic keys as credentials and mechatronic cylinders as ofine devices installed into
the door.
The V364 Demo Kit RFID shows a plant with RFID technology, that works by RFID cards as
credentials and Libra electronic cylinders as ofine devices installed into the doors.
The use of the V364 Demo Kit and the correct understanding of this guide, needs a
basic knowledge of the V364 System. For the complete system’s instructions refer to
the V364 F9000 System Administrator Manual and V364 RFID System Administrator
Manual, both available at site: https://app.iseo.com.
5
If the wireless network is not visible, re-check point 1. Take in consideration that
system takes approximately 1 minute to start, after the switch on.
Quick Start
1. Connect the main plug to an electrical outlet (220Vac).
2. Switch on your PC and connect to the wireless network:
•V364 DEMO F9000 in case of demo F9000.
•V364 DEMO RFID in case of demo RFID.
It is not necessary any access password.
6
5. Insert login credentials:
•Login ID = admin
•Password = admin
3. Open a V364 system compatible browser: Google Chrome, Microsoft Edge or Apple Safari.
6. If the clock of the Atlas controller is not synchronized to the clock of your
system (PC or iPad), the V364 interface will automatically advise you by a warning
message, showing how to synchronize the Atlas clock to the System clock.
7. Click on Synchronize V364 with your system.
8. The system is now ready to be used.
4. Write IP address: 192.168.0.184 to connect to Atlas Master. The next screen will be
shown.
7
2. Click on Main Controller bar.
To correctly switch off the system, at the end of the use, follow the next procedure.
1. In the cascade menu click on System Configuration then enter Network Configuration.
3. Click then Switch Off, then follow the instruction on the screen
8
System’s description
V364 Demo Kit F9000
Opening the F9000 Demo Kit, like in the picture below, you can see on the right side a F9000
plant example. While on the left side you can nd a general scheme, showing the system’s
principle of working.
On the right side, in the bottom, it is available a box that can be opened by a door, where you
can store the mechatronic keys and the USB stick provided with the kit. The USB stick con-
tains the Atlas licence le, the system back-up, the import doors le and the V364 system
manuals in electronic format, in the available languages, including this guide.
USB stick
Mechatronic keys
9
The plant is represented by 2 sites:
•Main site
•Remote site (Gas Renery)
The main site is composed by three F9000 mechatronic cylinders and one F9 pure mechanic
cylinder (ARCHIVE). Cylinders represent the doors inside the building and they are identied
by the department name to which they give access. The F9 mechanic cylinder is installed in a
low security door, on which access control is not needed, to show the full compatibility with the
F9000 mechatronic system. The building main entrance (SOUTH MAIN DOOR) is represented
by the online reader/writer unit (F9000 Wall Mount Reader), and a light, installed into the main
entrance door. The light goes ON when access is granted, to indicate the door opening, that in a
real context can be done by means of an electric lock or electric strike.
The remote site is composed by one F9000 mechatronic cylinder (GAS REFINERY) and represen-
ts a remote and unmanned site, far away from the main building, where it is needed to provide
access authorizations to a Mobile Workforce of technicians that is always on the move. This
scenario is therefore used to show the Iseo V364 Mobile App and the mobile validation concept.
10
Desktop RFID reader/writer
(not included in the demo kit)
RFID cards
USB stick
V364 Demo Kit RFID
Opening the RFID Demo Kit, like in the picture below, you can see on the left side a RFID
plant example. While on the rigth side you can nd a general scheme, showing the system’s
principle of working.
On the right side, in the bottom, it is available a box that can be opened by a door, where you
can store the RFID cards, the desktop RFID reader/writer unit, and the USB stick provided
with the kit. The USB stick contains the Atlas licence le, the system back-up, the import doors
le and the V364 system manuals in electronic format, in the available languages, including
this guide.
The Desktop RFID reader/writer unit is not included in the V364 Demo Kit, but needs
to be purchased separately. Please refer to the V364 catalogue for the part code.
Autres manuels pour V364
1
Table des matières
Langues :
