Iqinvision Alliance-mini Series Manuel utilisateur

IQeye Alliance-mini Series

Installation and Operating Instructions

Contents

1 Service 3

2 Unpacking 3

3 Description 4

4 Installation 4

5 Mounting Options 4

6 Surface Wall Mount 5

7 Pendant Mount 7

8 PC Configuration 8

9 VLC for H.264 Stream 10

1 Service

If the unit needs repair service or parts, the customer should contact

IQinVision for authorization to return, as well as shipping instructions.

IQinVision

33122 Valle Road

San Juan Capistrano, CA 92675-4853

Phone: +1-949-369-8100 or 1-877-850-0805 (toll-free in U.S.)

Fax: +1-949-369-8105

2 Unpacking

The Alliance-mini should include the following:

Interior Vandal Camera Model

1. IQeye Alliance-mini camera with aluminum black trim ring

2. Additional aluminum trim ring in beige

3. IQeye Alliance-mini Installation and Operating Instructions

4. Mini-CD with IQeye PC Tools

5. Camera mounting hardware

6. Qty (2) spare tamper-proof trim cover screws

7. Torx T-10 security wrench

8. Microphone In/Line Out audio cable

If the optional Alliance-mini IQD4-PB (black) or IQD4-PG (beige) Pendant Mount

Adapter Multi-Pack is purchased, the package should include the following:

1. Qty (5) Pendant Mount Adapters

2. Qty (10) Screws - Two Per Pendant Mount

3. Installation & Operating Instructions

3 Description

The Alliance-mini is a compact high-resolution mini-dome camera

system that supports both H.264 and MJPEG video compression and

is suitable for indoor vandal resistant installations via wall- or ceiling-

mounting. Optional adapters allow the camera models to be surface,

single-gang box wall-mounted as well as pendant-mounted. The

Alliance-mini comes with a black aluminum trim ring installed, and also

includes an extra aluminum trim ring in beige so that the camera will

look attractive in any décor.

4 Installation

This manual describes how to install the Alliance-mini, including

installation with the optional wall mount, as well as the optional pendant

mount. Installations should be performed by qualified service personnel

only in accordance with local, state and national code(s).

5 Mounting Options

The Alliance-mini is designed to be used in one of the following

configurations:

1. Surface mounted to any interior durable surface wall.

2. Surface mounted to a plenum or other durable ceiling surface.

3. Used in conjunction with a ¾” NPT threaded pipe (not included) as part

of a pendant mount solution with the use of the Alliance-mini Pendant

Mount Adapter Multi-Pack (P/N IQD4-PB or IQD4-PG).

NOTE: The first section of this guide covers installation of an Alliance-mini without the

optional mounting adapters. The subsequent sections briefly discuss how to mount the dome

camera with the optional adapters.

6 Mounting on an Interior Durable Surface Wall

1. Remove the trim cover

Using the supplied Torx T-10 security wrench loosen the two tamper-

proof screws holding the dome cover to the camera assembly. Note

that these screws are not captively held to the dome cover. If lost, two

spare tamper-proof screws are provided. If using a PoE Ethernet cable

coming through the wall, be sure to run this cable through the cable

pass-through in the camera base plate and connect it to the Ethernet

port on the camera as shown in Image 6.1.

Note: The included internal microphone is disabled by default.

If an external microphone or powered loudspeaker (not supplied) will

be connected to the mini dome camera use the supplied audio cable.

Pass the audio cable through the camera base plate and connect it

to the audio connector on the camera as shown in Image 6.2. External

microphone and powered loudspeaker will connect to the 3.5 mm

plugs.

2. Mount the Alliance-mini camera base to the desired wall or ceiling

surface using the supplied or equivalent mounting hardware.

Image 6.1

Side 1 Side 2 Cover Removal Ethernet Pass-Through

Image 6.2

3. Remove the camera shroud by placing your

palm over the top of the shroud, then gently

squeeze the two tabs toward the front of the

shroud toward the center of the camera.

Pivot these tabs away from the camera, then

pull the shroud off the camera as shown in

Image 6.3.

4. Set the field-of-view using the camera’s

3-axis gimbal.

5. Focus the camera.

Varifocal Lens: Adjust the field-of-view

and focus rings to focus the lens. Be sure

to lock the lens ring thumbscrews when

desired focus is achieved as shown in

Image 6.4.

Fixed Focal Lens: Focus the lens by

twisting the lens clockwise or counter

clockwise to achieve the desired focus.

Then lock the lens in place by tightening the

locking ring as shown in Image 6.5.

6. Replace the camera shroud by first

positioning the shroud against the rear

shroud tab, then pivoting the shroud

down toward the front two mounting

tabs. Squeeze the shroud gently and

push it down to engage the front two

mounting tabs.

7. Replace the trim cover.

Position the dome cover so the dome

cover screws line up with the matching

receiving holes on the mounting plate

(Image 6.6). Tighten the dome cover to

the mounting plate using the supplied

Torx T-10 security wrench.

Note: The cover fits in only one orientation. Do not apply

excessive force, or damage to the trim cover may occur. If it

does not push down easily on to the camera, the cover may

be flipped 180° from the correct orientation. Remove the

cover, flip it 180° and try again. An easy way to identify the

correct orientation is to look for the “Activity LED” hole in

the trim ring and align that on the same side of the camera

as the Activity LED.

Image 6.3

Image 6.5

Image 6.6

Image 6.4

7 Alliance-mini Pendant Mount Installation

The Alliance-mini Pendant Mount adapter is designed to easily mount the

camera via a ¾” NPT conduit (not supplied).

1. Pull the PoE Ethernet cable through the top of the Pendant Mount

and attach the Pendant Mount to the conduit by threading the pendant

cover to the conduit as shown in Image 7.1.

2. Pull the PoE Ethernet cable through the cable pass-through in the

camera base plate and connect it to the camera’s Ethernet port.

3. Attach the camera base plate to the Pendant mount using the supplied

quantity. (2) machine screws.

4. Setup the camera as described in steps 3-6 in section 6.

Note: The Alliance-mini Pendant Mount does not provide a weather seal to the camera. The Alliance-

mini in all of its mounting configurations is still an interior camera.

Figure 7.1

8 PC Configuration of the Alliance-mini

1. Plug the camera into the network.

2. The Alliance-mini cameras are powered via the Ethernet using an IEEE

802.3af power source.

Power Source Warning

Note that the Alliance-mini camera can only be powered with a standard IEEE

802.3af PoE injector or PoE switch. It CANNOT BE POWERED with DC, AC or with

the IQinVision proprietary IQpoet™ injector.

3. Alliance-mini field-of-view and focus adjustment must be performed

using a browser to view the camera image.

A. Insert the IQtools CD into the CD drive of the PC. Once the CD

auto-starts, run IQfinder either from the CD by clicking “Scan for

IQeye cameras on my network” or by installing IQfinder on the

local machine by selecting “Install IQfinder”.

B. Click the “Scan for IQeye

cameras on my network” to find

IQeye cameras.

The detected cameras will be

displayed in the IQfinder window.

Select a camera from the list and

click the “Assign IP” to edit the

selected camera’s IP settings.

C. The “Assign IP” window allows

the IP Address, Subnet and

Gateway of the camera to be

changed, and alternatively

the camera to be configured

for DHCP operation. Click the

“Apply” button after making the

desired changes.

Note: Changing between a static IP address and

DHCP will require the camera to be rebooted.

D. To view a camera double-click

on a camera entry or highlight

a camera in the list and click

the “Web Page” button. The

“Live” page will be displayed

through your default browser

(IE recommended). It is also

possible to open Internet

Explorer and enter the IP

address of the IQeye camera in

the address field of the browser.

4. Additional Configuration.

To perform further configuration

of the camera click on the “Setup”

tab.

Note: The default username is “root” and the

default password is “system”.

9 VLC for H.264 Stream

1. Using VLC for H.264 Stream

A. To prepare the camera to serve an

H.264 stream, install VLC Player

(Version 1.0.1 or higher) from

https://videolan.org/vlc/ and use

default installation parameters.

B. Launch VLC Player.

C. Click on “Media” and then “Open

Network Stream”.

D. On the “Network” tab choose

RTSP under the “Protocol” drop

down. Then enter the IP address

of the camera under the “Address”

field.

E. Click the down arrow next to the

“Play” button on the bottom right

to expand the list. From the menu

choose “Play”. The video player

will open with the live H.264 video

stream.

2. Additional Documentation

For additional information and

technical documents, including

detailed configuration of VLC, please

visit http://www.iqeye.com/support/

manuals.html

For product warranty, additional

documentation and technical

information, please visit

www.iqeye.com/support

H.264 Stream

RTSP Protocol

VLC Player

Open Network Stream

Autres manuels pour Alliance-mini Series

Table des matières

Autres manuels Iqinvision Caméra de sécurité

Iqinvision

Iqinvision 4K Sentinel series Manuel utilisateur

Iqinvision

Iqinvision IQA32NI-B5 Manuel utilisateur

Iqinvision

Iqinvision IQ702-V6 Manuel utilisateur

Iqinvision

Iqinvision IQeye Sentinel Series IQ811 Manuel utilisateur

Iqinvision

Iqinvision IQeye Alliance-mini series Manuel utilisateur

Iqinvision

Iqinvision IQeye Sentinel Series IQ802 Manuel utilisateur

Iqinvision

Iqinvision IQeye 040S Manuel utilisateur

Iqinvision

Iqinvision Alliance-mini Series Manuel utilisateur

Iqinvision

Iqinvision IQ510-V3 Manuel utilisateur

Iqinvision

Iqinvision IQM30NE-B5 Manuel utilisateur

Iqinvision

Iqinvision Sentinel Series Instructions d'utilisation et de sécurité

Iqinvision

Iqinvision IQeye Alliance Series IQA10 Manuel

Iqinvision

Iqinvision IQeye700 Manuel utilisateur

Iqinvision

Iqinvision IQeye Alliance-mini IQD30SV-F1 Manuel utilisateur

Iqinvision

Iqinvision IQeye Manuel utilisateur

Iqinvision

Iqinvision IQ540SI-V9 Manuel utilisateur

Iqinvision

Iqinvision IQeye501 Manuel utilisateur

Iqinvision

Iqinvision IQeye501 Guide de référence

Iqinvision

Iqinvision IQeye 4 Series Manuel

Iqinvision

Iqinvision IQeye Sentinel Series Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur