IPG Interpack USA 2324-OPF Manuel utilisateur
USA 2324-OPF
Serial Numbers TM187 or TM677 XX X XXX
UNIFORM SEMI-AUTOMATIC CASE SEALER
USER MANUAL
USA 2324-OPF
For Serial Numbers:
TM187 or TM677 XX X XXX
REV 2 10122022
REV 2 10122022
UDM187 USA2324-OPF Manual 2
UM 187TW / UM677TW
TABLE OF CONTENTS
OPERATION MANUAL..........................................................................................................2
TABLE OF CONTENTS..........................................................................................................2
REVISION CONTROL............................................................................................................3
TECHNICAL ASSISTANCE...................................................................................................4
Technical Support.................................................................................... 4
Replacement Parts ................................................................................... 4
WARRANTY.............................................................................................................................5
DESCRIPTION OF MACHINE..............................................................................................6
Description............................................................................................... 6
IMPORTANT SAFEGUARDS................................................................................................7
SPECIFICATIONS.................................................................................................................10
Machine Dimensions.............................................................................. 10
Machine Weight. .................................................................................... 10
Power Requirements.............................................................................. 11
Operating Speed..................................................................................... 11
Operating Conditions............................................................................. 12
Tape Specifications................................................................................ 12
Carton Specifications............................................................................. 13
SET-UP PROCEDURE ..........................................................................................................14
Receiving and Handling......................................................................... 14
Set-Up..................................................................................................... 14
OPERATING INSTRUCTIONS ...........................................................................................16
MAINTENANCE ....................................................................................................................17
TROUBLESHOOTING..........................................................................................................18
Recommended Spare Parts.................................................................... 19
OPTIONAL EQUIPMENT....................................................................................................20
PARTS LIST............................................................................................................................21
UDM187 USA2324-OPF Manual 3
UM 187TW / UM677TW
REVISION CONTROL
REVISION CONTROL
REV00 Initial Release
5(98SGDWHG:DUUDQW\
UDM187 USA2324-OPF Manual 4
UM 187TW / UM677TW
TECHNICAL ASSISTANCE
Technical Support
This is the Interpack Model USA 2324-OPF Uniform Top and Bottom Belt Case Sealer you
ordered. It has been set up and tested in our factory with Intertape manufactured pressure
sensitive tapes. If any problems occur when setting up or operating this equipment, please
contact the authorized distributor from where you purchased this item.
Should you need to contact Interpack Technical Support, please have the Case Sealer
model number and serial number available. This information can be found on the
nameplate of the side panel of the machine. Interpack Technical Support is available during
normal business hours (Eastern Time).
PHONE 813-621-8410 x101
If you have a technical question that does not require an immediate response, you may contact
Interpack by fax.
FAX 813-621-8449
Replacement Parts
Order parts by item number, part name and quantity required. Replacement parts are
available from your Authorized Interpack Distributor exclusively.
Should you require assistance selecting the correct part, you may call:
Intertape Polymer Group
Interpack Machinery
9940 Currie Davis Drive, Suite 23B
Tampa, FL, 33619
Tel: 1-800-474-8273 Option 3
Fax: 1-800-462-1293
MODEL:
SERIAL NUMBER:
DISTRIBUTOR PURCHASED FROM:
DATE OF PURCHASE:
WARRANTY
EQUIPMENT WARRANTY AND LIMITED REMEDY: The following warranty is made in lieu of all other
warranties, express or implied, including, but not limited to, the implied warranty of merchantability, the
implied warranty of fitness for a purpose, and any implied warranty arising out of a course of dealing, a
custom or usage of trade. Any modification of the Tape Heads, Case Tapers or Case Erectors shall make
this warranty null and void.
Intertape sells its Interpack Tape Heads, Case Tapers and Case Erectors with the following warranties:
1. The HSD 2000 Tape Heads' knife blades, springs and wipe down rollers will be free from all
defects for a period of ninety (90) days.
2. All other HSD 2000 Tape Head parts will be free from all defects for one (1) year after delivery.
3. Drive Belts will be free from defects for ninety (90) days after delivery.
4. The Gear Motors will be free from defects for one (1) year after delivery.
5. All other components for Case Tapers and Case Erectors will be free from defects for one (1)
year after delivery.
If any part is proven defective within its warranty period, then the exclusive remedy and Intertape’s and
the seller's sole obligation shall be, at Intertape’s option, to repair or replace the part, provided the
defective part is returned immediately to Intertape’s factory or an authorized service station designated
by Intertape.
A part will be presumed to have become defective after its warranty period unless the part is received or
Intertape is notified of the problem no later than five (5) calendar days after the warranty period.
If Intertape is unable to repair or replace the part within a reasonable time, then Intertape, at its option,
will replace the equipment or refund the purchase price. Intertape shall have no obligation to install the
repaired or replacement part.
Intertape shall have no obligation to provide or pay for the labor required to install the repaired or
replacement part. Intertape shall have no obligation to repair or replace (1) those parts failing due to:
operator misuse, carelessness, or due to any accidental cause other than equipment failure, or (2) parts
1. Failure or damage is due to misapplication, lack of proper maintenance, abuse, improper
installation or abnormal conditions such as temperature, moisture, dirt or corrosive
matter, etc.
2. Failure due to inadequate cleaning, improper operating environment, improper utilities
or operator error.
3. Failure due to operations above the rated capacities, or in any other improper manner,
either intentional or otherwise.
4. Failure is due to equipment, which has been altered by anyone other than an authorized
representative of Intertape Polymer Group.
5. Failure is due to an attempt by the purchaser to correct alleged defective equipment. In
this event the purchaser is responsible for all expenses incurred.
LIMITATION OF LIABILITY: Intertape and seller shall not be liable for direct, indirect, special, incidental
or consequential damages based upon breach of warranty, breach of contract, negligence, strict liability or
any other legal theory. Additionally, Intertape and seller disclaim all liability if the Tape Heads, Case
Tapers or Case Erectors are modified in any way.
The foregoing Equipment Warranty and Limited Remedy and Limitation of Liability may be changed only
by written agreement signed by authorized officers of Intertape and seller.
UDM187
USA2324-OPF Manual
UM 187TW / UM677TW
5
UDM187 USA2324-OPF Manual 6
UM 187TW / UM677TW
DESCRIPTION OF MACHINE
Figure1
Description
The Intertape USA 2324-OPF Top and Bottom Belt Drive Carton Sealing Machine with
HSD2000 ET II Tape Heads is designed to apply Intertape brand Pressure Sensitive carton
sealing tape to the top and bottom center seam of Regular Slotted Containers (RSC). The
USA 2324-OPF is manually adjustable to a wide range of carton sizes.
UDM187 USA2324-OPF Manual 7
UM 187TW / UM677TW
IMPORTANT SAFEGUARDS
There is a number of safety labels used on Intertape Carton Sealers.
The illustrated label shown in Figure 2 is
attached to the Knife Guard inside the
upper and lower HSD2000 ET II Tape
Head. The label warns operators and
service personnel of the very sharp knife
used to cut the tape at the end of the tape
application.
The HSD2000 ET II Tape Heads are
equipped with a Knife guard that covers the
blade. The Tape Heads should never be
operated with the blade guards removed.
Turn air and electrical supplies off before
servicing the tape heads.
Figure 2
The label shown in figure 3 is attached to
the control box next to the on/off switch.
The label warns the service personnel to
unplug the power supply before attempting
any service work on the carton sealer.
Figure 3
UDM187 USA2324-OPF Manual 8
UM 187TW / UM677TW
The illustrated label shown in Figure 4 is
located on the “Exit” end of the machine
bottom belts. The label warns the operators
and service personnel of the pinch point at
the exit end of the bottom belts.
Figure 4
The illustrated label shown in Figure 5 is
located on the “Exit” end of the machine
top belts. The label warns the operators and
service personnel of the pinch point at the
exit end of the top belts.
Figure 5
UDM187 USA2324-OPF Manual 9
UM 187TW / UM677TW
The illustrated label shown in Figure 6 is
located on the side of the column. This
label provides convenient safety instruction
for the operator and service personnel in
the operation of the Intertape Carton
Sealing Equipment.
Figure 6
Note: Should any of the safety labels placed on the Machine be damaged or
destroyed, replacements are available.
UDM187 USA2324-OPF Manual 10
UM 187TW / UM677TW
SPECIFICATIONS
Machine Dimensions
Figure 7
Machine Weight : 592 lbs. (269 kg)
Table des matières
