Ipevo IS-01 Manuel utilisateur
User Manual
for IS-01 Interactive Whiteboard System
Table of Contents
What’s in the Box ................................................................................1
The Basics ...........................................................................................1
Two Ways to Use It...............................................................................2
How It Works........................................................................................3
Get to Know It......................................................................................4
Installing It......................................................................................5-11
Step 1: Software & Driver Installation................................ 5
Step 2: Positioning and Connecting the Sensor Cam.......5-6
Step 3: Securing the Sensor Cam...................................6-8
Step 4: Connecting to the Computer..................................9
Step 5: Readying the Interactive Pen.................................9
Step 6: Calibration...................................................... 10-11
Using It.............................................................................................. 12
Using IPEVO Annotator Software.....................................................13-15
FAQ....................................................................................................16
Troubleshooting..................................................................................17
1
What’s in the Box
The Basics
Congratulations on your purchase of the IS-01 Interactive Whiteboard System.
After a few simple steps, your system will be calibrated and ready to use.
Your package should contain the following:
• IS-01 Sensor Cam
• IS-01 Interactive Pen
• IS-01 Pen extension wand
• 2m USB cable
• Ceiling mount
• User Manual (this document)
• Software CD-ROM
• 2 AAA Batteries
The IPEVO Interactive Whiteboard System, or IS-01, turns your large projector
screen into an interactive touchscreen, giving you the ability to easily draw and
annotate for education and business. Plus, because IS-01 is compatible with
many different kinds of software, you’ll also be able to control your computer
(and what’s on the screen) at a distance. And this is all possible no matter
what make and model of projector you have.
Extension Wand
Sensor Cam User
Manual
CD-RomUSB Cable
Ceiling Mount AAA
Batteries
Interactive Pen
2
Two Ways to Use It
Use the Interactive Pen as a Computer Cursor
The Interactive Pen can behave like a mouse, transforming any surface
into a touchscreen. Use the Pen to intuitively perform the actions you’d
normally use your mouse to perform.
Note: The Interactive Pen can perform normal mouse actions including click, double click,
and drag. However, some actions are not executable with the Pen, such as hovering.
Annotate Your Text and Images
Using IPEVO Annotator, you can draw and write directly on your interactive
whiteboard. You can even draw on top of your document camera’s live
video feed. Engage your audience and clarify your material.
3
How It Works
Emits infrared signals on
contact or by pressing the
green button
Reads infrared signals and
sends them to your computer
INTERACTIVE PEN
SENSOR CAM
IS-01 is made up of two devices: the Sensor Cam and the Interactive Pen. The
Sensor Cam detects the physical location of the Pen and sends this information
to your computer, which then translates the Pen’s motion into cursor motion.
Wherever you move the Pen, the computer will move its cursor in real time.
You can also perform mouse clicks and drags with the Pen.
4
Get to Know It
Extension Wand
When using a larger or taller screen area, attach the Extension Wand to the
Interactive Pen to help reach all areas of the screen.
Contact Sensitive Tip
Send signals for left, right, and double mouse
clicks. Brief contact performs a left click while
pressing in and holding for 2 seconds or
longer performs a right click.
IPEVO button
This is another way to perform mouse clicks.
Press for a left click, or press and hold for 2
seconds or longer for a right click.
Battery cover
Open to reveal slots for 2 AAA batteries.
Power switch
Turn the unit on and off.
LED indicator
Lights up when powered
up and connected.
USB Port
Connect USB here.
Lens
Detects signals emitted by
the Interactive Pen.
Adjustment Knob
Change and secure sensor
angle by tightening knob.
5
Installing It
1. Software & Driver Installation
2. Positioning and Connecting the Sensor Cam
PC: Insert the CD-ROM into your computer and follow the onscreen prompts to
complete the installation.
Mac:
• Insert the CD-ROM into your computer.
• Double-click the “IS-01.DMG” le. A folder named “IPEVO IS-01” will appear.
• Drag the IPEVO IS-01 folder into the Application folder to complete
the installation.
Proper position of the Sensor Cam is important for optimum operation.
Follow these guidelines to place the Sensor Cam:
• For most projectors, a good position for the Sensor Cam will be the same
location as the projector. One exception to this is if you are using a short-
throw projector. In that case, you will need to place the Sensor Cam further
away from the screen than the projector.
• Minimal distance from your screen depends on screen size. Place the Sensor
Cam according to the recommended distances in the chart below:
• The Sensor Cam should face directly at the projection screen. Depending
on your screen’s height, you will have to adjust the Sensor Cam’s Head
to face upward or downward. Please refer to the steps below:
Loosen
Adjust Angle
Tighten
Screen Size 50” 60” 80” 100”
Minimal
Distance
5 ft
(155 cm)
5.5 ft
(170cm)
7.5 ft
(230 cm)
9.5 ft
(290 cm)
23
6
Once you’ve found the right position, it’s important to make sure your Sensor
Cam is steady and secure. There are three ways to secure your Sensor Cam,
depending on your setup:
3. Securing the Sensor Cam
• The Sensor Cam is best placed opposite the center of the screen at a
straight-on angle. However, a straight-on angle is not required for
acceptable operation, and the Sensor Cam may be placed at another
angle if necessary. Please refer to the diagram below for placement
zones according to accuracy quality:
As you can see:
• Accuracy is better when the Sensor Cam is closer to the center.
• Accuracy decreases as the angle increases.
• Larger screens require more distance between the screen and the
Sensor Cam.
Note: Please keep a clear path between the Sensor Cam and the projector screen to ensure
proper operation.
Sensor Cam Placement Zone
Installing It (cont’d)
7
A. Placing on the desktop
Use a flat, smooth desktop surface. Make sure nothing is blocking the Sensor
Cam’s path to the screen surface. Adjust the knob to angle the Sensor Cam
directly at the center of the screen surface.
B. Using an upside-down ceiling mount
IS-01 can be mounted upside-down onto the ceiling or ceiling-mounted
projector. To do so:
1. Twist the Sensor Cam base onto the screw on the ceiling mount until tight.
Turn the star-shaped knob near the base for additional angle adjustment.
2. Before afxing the mount to the ceiling, hold the Sensor Cam in an area
just below (by a few inches) where you intend to mount the projector.
Run the Sensor Cam Position Diagnosis (see Page 11) with the Sensor
Cam in this position to ensure maximum accuracy.
8
3. Ensure the mounting surface is clean and free of grit. Remove the sticker
from the bottom of the ceiling mount, and afx the ceiling mount rmly
onto the mounting surface.
Note: The sticker of Ceiling Mount is extremely adhesive and should only be applied once.
The Sensor Cam can be detached without removing the Ceiling Mount. Simply unscrew the
Sensor Cam from the Ceiling Mount.
C. Using a tripod
The Sensor Cam comes with a built-in tripod mount. Consider mounting the
Sensor Cam onto any standard tripod.
Installing It (cont’d)
Autres manuels pour IS-01
1
Table des matières
Autres manuels Ipevo Tableau blanc interactif
