IPC Gansow 1250 P Manuel utilisateur

PLDC02161 1

1250-1280 P / D, Quick guide

This guide is intended for quick consultation only and does not replace the user and maintenance manual.

Before using the machine, read the user and maintenance manual contained in the machine’s packaging thoroughly and strictly

follow all the instructions.

PREPARATION & OPERATION

Pull the STARTER lever.

Move the engine speed control lever to

the maximum position on the right.

Move the lever to the “START” position

and hold it there.

Switch the machine on by turning the

ignition key to START, when the engine

starts release the key in the ON position

and release the lever that had previously

been held in the “START” position.

Lower the main brush.

Lower the side brushes.

Activate suction using the lever, adjusting

air ow to ensure suction of the dust Do

not use suction on wet surfaces.

Press the accelerator pedal to start

travel, pressing it to the right the machine

will move forwards, pressing it to the left

the machine will move backwards.

To collect voluminous objects, press the

front ap lift pedal

To stop the machine, press the brake

pedal, which also acts as parking brake,

using the special locking lever.

Emptying the bottom unloading debris

bin, model 1250:

• Release the bin lock.

• Pull out the rear bin by means of its

handle.

• Take the bin (which is tted with

wheels) to the rubbish collection

point and empty it.

Emptying the bottom unloading debris

bin, model 1280:

• Lift the bin to the desired height,

holding the enabling button and

moving the selector located on the

instrument panel.

• Pull the lever to rotate the bin and

empty its contents.

PLDC02161 2

DAILY MAINTENANCE

When you have nished cleaning, pro-

ceed as follows:

• Switch the machine off, after having

moved the engine speed lever to the

minimum position.

• Activate the parking brake.

• Raise the centre brush and the side

brushes, to prevent damage.

CLEANING THE DUST FILTER

Deactivate suction using the lever.

Activate the lter shaker for 10 seconds

using the corresponding button.

Empty the debris bin.

Check and remove any debris wrapped

around the side brushes and on the

centre brush.

WEEKLY MAINTENANCE

Check that the suction lter is tight and

clean.

REPLACING THE CENTRE BRUSH

• Unscrew the knob and open the door on the left of the machine.

• Unscrew the three knobs securing the brush compartment cover.

• Pull out the brush cover compartment.

• Remove the brush, holding it on the plastic core.

• Remove the adapter from the core of the old brush and t it to the

new brush, taking care to keep the bristles aligned in the same direc-

tion.

• Fit the new brush and make sure that the adapter is inserted on the

drive hub.

• Replace the brush compartment cover using the knobs, following the

dismantling operations in reverse order.

ADJUSTING CENTRE BRUSH PRESSURE

• Unscrew the knob indi-

cated.

• Turn the lever anti-

clockwise to increase

pressure, making sure to

align the knob fastening

hole.

• Screw the knob back on.

ADJUSTING SIDE BRUSH HEIGHT

• Move the side brushes to the working

position.

• Loosen the two adjustment screws

underneath the brush lifting knob.

• Manually move the brush to the re-

quired position.

• Tighten the adjustment screws.

FLOW

Ce manuel convient aux modèles suivants

Autres manuels IPC Gansow Machine de plancher

IPC Gansow

IPC Gansow CT40 C Manuel utilisateur

IPC Gansow

IPC Gansow CT 230 BT 85 Manuel d'utilisation

IPC Gansow

IPC Gansow Cleantime 60 Manuel utilisateur

IPC Gansow

IPC Gansow CT30 B Manuel utilisateur

IPC Gansow

IPC Gansow CT15 Series Manuel utilisateur

IPC Gansow

IPC Gansow 1010 E Manuel utilisateur

IPC Gansow

IPC Gansow CT15 ECS Series Manuel utilisateur

IPC Gansow

IPC Gansow 1010 S Manuel utilisateur

IPC Gansow

IPC Gansow CT40 BT Manuel utilisateur

IPC Gansow

IPC Gansow CT160 Manuel utilisateur

IPC Gansow

IPC Gansow CT100 BT Manuel utilisateur

IPC Gansow

IPC Gansow CT70 Rider Manuel utilisateur

IPC Gansow

IPC Gansow CT160 BT70 Manuel utilisateur

Manuels Machine de plancher populaires d'autres marques

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Manuel utilisateur

Numatic

Numatic ET 4045 Manuel utilisateur

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Manuel utilisateur

Mytee

Mytee 8070 Mytee-Lite Manuel utilisateur

Kärcher

Kärcher B 140 R Manuel utilisateur

Triple S

Triple S Ace 26T1 Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance SW 750 Manuel utilisateur

Tornado

Tornado Marathon 2000 98190 Manuel

Windsor

Windsor ADMIRAL Admiral 8 Manuel utilisateur

Numatic

Numatic TTB 1117/100 Manuel utilisateur

Tennant

Tennant 8210D Manuel utilisateur

Nobles

Nobles Frontier Manuel du produit

lavina

lavina 21-X Manuel utilisateur

KENT

KENT Edge 28B Manuel utilisateur

Tennant

Tennant 215 Manuel du produit

Windsor

Windsor BDP 51/2000C Manuel utilisateur

CleanFreak

CleanFreak DURA-18HD Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST Guide de l'administrateur