ionmax VIENNE Manuel utilisateur
ION630
VIENNE
DESICCANT DEHUMIDIFIER
Thank you for purchasing the Ionmax Vienne ION630 Desiccant Dehumidier. The Ionmax Vienne
can help to monitor the humidity and remove extra moisture from the air. This helps protect your home
from the formation of mould, spots and corrosion.
Please read this manual carefully before use to ensure proper usage and save these instructions for
future reference.
This package includes:
●Ionmax Vienne ION630 Desiccant Dehumidier
●User Manual
Please Note: The user manual may be altered at any time to assist in quality improvement.
The design and product development may be upgraded without public notice.
SAFETY INSTRUCTIONS 3
FEATURES & SPECIFICATIONS 4
PRODUCT DIAGRAM 5
CONTROL PANEL 5
UNIT SETUP 6
TO OPERATE SAFELY 6
OPERATING INSTRUCTIONS 7
EMPTYING THE WATER TANK 10
CONTINUOUS DRAINAGE OPTION 10
MAINTENANCE 11
TROUBLESHOOTING GUIDE 12
WARRANTY DETAILS 14
WARRANTY REGISTRATION 15
DEAR CUSTOMER SAFETY INSTRUCTIONS
CONTENTS
SAFETY INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE
OPERATING
WARNING - This appliance is intended for use in a domestic environment only. Any other use is not
recommended by the manufacturer and may cause re, electrical shocks or other injury to person or
property.
When using electrical appliances, basic safety precautions should always be followed:
1. Do not operate the unit with a damaged cord or plug, after it malfunctions or has been dropped or
damaged in any way. Return to an authorised service facility for examination and repair.
2. This unit should always be kept in an upright position to avoid any damage. Position the unit on a
at stable surface.
3. Check the household voltage to ensure it matches the unit’s rated specication before operating.
4. Operate this unit in an ambient temperature between 1°C and 40°C.
5. Ensure that the air inlets and outlets are not blocked or covered.
6. Do not place the unit too close to curtains or other objects - refer to Unit Setup instructions.
7. When using the “LAUNDRY MODE” to speed up the drying of wet clothes in the room, please
keep the clothing at a safe distance from the unit to prevent water from dropping onto the unit.
8. Never place anything on top of the unit and do not cover with any kind of material while in use.
9. This product is intended for domestic and light ofce use ONLY and not for commercial, industrial
or outdoor use.
10. To protect against electrical shocks, do not immerse unit, plug or cord in water, or spray with
liquids.
11. Never unplug the power cord without pressing the “ON/OFF” button to off rst, as this could
damage the unit.
12. Always unplug the unit when not in use or moving location. To disconnect from the power supply,
grip the plug and pull from the power socket. Never pull by the cord.
13. Always empty the water tank before storing the unit away.
14. Close supervision is necessary when any appliance is used by or near children and pets.
15. Do not run power cord under carpeting, or cover with rugs or runners. Arrange the cord away from
areas where it may be tripped over.
16. Never operate or store the unit in direct sunlight.
17. To repair the unit, take it to a qualied service engineer. Repairs carried out by unqualied people
may cause damage to the unit or injury to persons or property and void the warranty.
18. Where possible, avoid the use of an extension cable as they may overheat and cause a risk of re.
Only use an extension cord after ensuring it is in perfect condition.
19. Do not use the unit without the air lter.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for their
safety. Children should be supervised to ensure that they do not play with the appliance.
SAVE AND READ THESE IMPORTANT SAFETY INSTRUCTIONS
3
FEATURES PRODUCT DIAGRAM
Compressorless dehumidier - uses desiccant rotor technology
Environmentally friendly - emits no harmful gases & quiet in operation
Moisture removal - 10 litres/day (20°C, 60%RH )
Water tank capacity - 4.2 litres
Automatic dehumidication - according to power level (H/L) and humidity settings
Digital humidity display - for easy viewing
Timer up to 12 hours - for added convenience
Temperature range for use - 1°C - 40°C
Auto restart after power cut - Once the power is restored after a power failure, the appliance will
continue to operate at the selected settings prior to the power failure.
Light and portable with carry handle
Removable water tank with handle
Ioniser for cleaner air
Model Ionmax ION630
Voltage 220-240V ~ 50Hz
Power consumption 420-740W
Weight 7.5kg
Dimensions 379 (W) x 239 (D) x 520 (H) mm
SPECIFICATIONS
4
PRODUCT DIAGRAM
Control panel
Water tank
Air outlet
Water level
indicator
Air inlet
Air filter
Handle
CONTROL PANEL
FULL
CHECK
RELATIVE
HUMIDITY
POWER
LEVEL
ON/OFF
TIMERION
HIGH
LAUNDRY
LOW
AUTO
12H
8H
4H
2HION ◄SET
◄ROOM
%RH
40 50 60
Ion Button
Power Level
Indicators
Negative Ions
Indicator
Digital Display
Water Full Indicator
Displays the room Relative Humidity level
and the humidity setting conditions temporarily.
Indicator lights up when the water tank
is full or incorrectly installed.
Indicator lights up when the unit
malfunctions or overheats. Relative Humidity
Indicators
Relative Humidity Button
Button
Button Button
5
UNIT SETUP
TO OPERATE SAFELY
1. Place the unit in an upright position on a stable, level
surface. (Please ensure unit is not sitting on its own
cable).
2. Please ensure the unit is a safe distance away from
walls and furniture (see image on the left).
3. Please keep clothes at a safe distance of 30cm from air
outlet of the unit to prevent water dripping into the unit.
4. For best results, position the dehumidier somewhere
central like a landing or a hallway. As long as the
internal doors are open, the excess moisture from all
of the rooms in the house will migrate naturally towards
the dehumidier and be processed.
min 30cm away
from outlet
Air inlet
Air outlet
Top
min 60cm
min 20cm
min 20cm
min 30cm
min 20cm
CAUTION: Do not place the dehumidier in a
broom cupboard, boiler room, small unventilated
rooms etc. Avoid placing the dehumidier in small
conned areas or in close proximity to a radiator
or heat source such as tumble driers and cookers
to prevent the dehumidier from overheating.
Do not use this dehumidier in dusty or industrial environments where
particles can get into the dehumidier. This will cause a malfunction and
void your warranty.
Ensure the water tank is tted
correctly. If the tank is full
or not in place, the “FULL”
indicator will light up and the
machine will stop operating.
Maintain safe clearance
space as shown in Unit Setup.
Do not attempt to remove
the water tank while unit is
in operation to avoid water
leakage.
Do not insert small
objects into the unit as
this will damage it and
cause a hazard.
6
OPERATING INSTRUCTIONS
ON AND OFF
●Connect the power plug to the appropriate electrical socket outlet.
●Press the ON/OFF button to turn the appliance ON.
Note: The appliance will start to run on the previously used settings for humidity and fan.
●Press the ON/OFF button again to turn the appliance OFF.
In the event of a power failure
●Once the power is restored after a power failure, the appliance will continue to operate at the
selected settings prior to the power failure.
●This includes the power level, relative humidity and time remaining in timer mode.
After turning the appliance OFF
●After turning the appliance OFF using the ON/OFF button, the fan will continue to run for
a two minute period. This is a normal procedure and helps to cool and protect the internal
components.
●During these two minutes, DO NOT remove the power plug from the electrical socket outlet;
wait for the fan to stop running.
FULL
CHECK
RELATIVE
HUMIDITY
POWER
LEVEL
ON/OFF
TIMERION
HIGH
LAUNDRY
LOW
AUTO
12H
8H
4H
2HION ◄SET
◄ROOM
%RH
40 50 60
ION
●Press the “ION” button to turn the ioniser on and off.
●When the ioniser is on, the unit releases negative ions from the air outlet to help purify the air.
TIMER
●Press the “TIMER” button to select your desired running time (2, 4, 8, or 12 hours). The unit will
automatically switch off at the end of the selected time period.
●When no “TIMER” is set (the LED is off), the unit will run continuously, or until the water tank
becomes full.
2H 4H 8H 12H
OFF
(LED OFF)
7
MODE DESCRIPTION
60%
Maintain the room at a comfortable indoor humidity level.
Note: Use this mode for maximum energy saving and quiet
operation.
50%
Inhibit mould and bacteria growth
Note: Use this mode for daily normal household use to maintain
humidity at a healthy level of 55%RH (Bacteria and mould will not
breed at this level).
40%
Super dry mode to prevent condensation
Note: Use this to control a very damp room in the rst couple of days
and then switch to 50% or 60% to save energy.
Note:
●RH indicated has a ±10% RH tolerance and may vary depending on room temperature.
●When the unit’s humidity level has been set, the heater and fan will operate at the specied power
level until the room humidity level reaches the set humidity level, unless the ambient temperature
becomes too high.
●Once the desired humidity level is reached, the humidity setting indicators will ash and the unit will
pause dehumidication (the heater and fan will turn off) after 2 minutes of internal cooling. Every
15 minutes, the fan will run for 2 minutes to check the indoor humidity level. If the room humidity is
higher than 5% of the set desired humidity level, the appliance will restart dehumidication. If not,
the appliance will pause and check again after 15 minutes. During this time, the buttons can still be
used to change the settings while the fan is paused.
RELATIVE HUMIDITY
●Press the “RELATIVE HUMIDITY” button to select your desired relative humidity (RH) level.
●The selected RH level will show up on the digital display and the corresponding LED indicators will
light up.
●The RH setting will change at 5% increments with either one or two LEDs lit up. For example, when
the selected RH level is 45%, both 40% and 50% LED indicators will light up.
●The set RH level will remain on the digital display for 3 seconds before returning to show the room
humidity level again.
40 50 60 40 50 60
40%RH 45%RH
40 50 60
40 50 60
50%RH
55%RH
40 50 60
60%RH
8
POWER LEVEL DESCRIPTION
Auto
Convenient automatic operation
●Fan and heater settings will be automatically controlled
●Fan and heater will run on high when room humidity is 10%
above the desired setting
●Fan and heater will run on low when room humidity is less
than 5% above the desired setting
Low
Power saving, low noise and long term operation,
suitable for daily use
Fan and heater runs on low speed
High For rapid dehumidication
Fan and heater runs on high speed
Laundry
(Continuous)
Suitable in winter to dry clothes faster
●Provides heated air on high speed continuously, only
stopping when the water tank is full. Humidity setting will be
disabled (all humidity setting indicators will switch off)
●It can take between 2-8 hours to dry your laundry. You may
want to enable a timer setting when using Laundry mode to
avoid wasting energy.
●You may use this mode for extreme drying of very damp
rooms and then switch to Auto or Low after a few hours.
●To prevent excess energy consumption, avoid using
Laundry mode for normal daily use.
POWER LEVEL
●Press the “POWER LEVEL” button to select the desired level for the fan and heater.
●The digital display will show “CO” temporarily when Laundry is selected.
AUTO LOW HIGH LAUNDRY
DIGITAL DISPLAY
●The digital display will show the room RH level when the unit is in operation.
●When the Relative Humidity button is pressed, the digital display will show the selected RH
level. Once the desired RH level has been set, the digital display will show the set RH level for
3 seconds before returning to show the room RH level.
●When Laundry power level is selected, the digital display will show “CO” for 3 seconds before
returning to show the room RH level.
%RH
9
You may use a hose with an inner diameter of 12mm for continuous drainage:
●Remove the plug from the drain hole at the bottom of the water tank. Keep
the plug for future use.
●Fit the hose rmly on the drain connector. The hose must lead to an
appropriate drain at a downward slope with no sharp bends.
NOTE:
●Ensure the water tank is fully installed in position before inserting the hose
and before running the appliance.
●Before removing the water tank, ensure that the hose is disconnected.
EMPTYING THE WATER TANK MAINTENANCE
CONTINUOUS DRAINAGE OPTION
1. When the water tank is full, the “FULL” LED illuminates and the unit will stop running in a few
minutes.
2. Do not move the unit or remove the water tank if the unit is still operating, as water may leak,
damage the unit or cause an electric shock.
3. To remove the water tank, pull it out gently by gripping the bottom of the water tank and lift
carefully.
4. Remove the cover of water tank rst, then pour the water away, clean the water tank and restore
the cover and the water tank to the correct position.
Pull water tank out Lift by the handle Lift open a corner of
the water tank cover
Pour the water away Ret the cover and restore
the water tank into position
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels ionmax Déshumidificateur
ionmax
ionmax ECORPRO DRYFAN DB8 Manuel utilisateur
ionmax
ionmax Ion632 Manuel utilisateur
ionmax
ionmax ION681 Manuel utilisateur
ionmax
ionmax Ion632 Manuel utilisateur
ionmax
ionmax ion612 Manuel utilisateur
ionmax
ionmax DRYFAN DF8 Manuel utilisateur
ionmax
ionmax ion612 Manuel utilisateur
ionmax
ionmax Rhine ION650 Manuel utilisateur
ionmax
ionmax ION680 Manuel utilisateur
ionmax
ionmax Ion632 Manuel utilisateur
