ION Bright Max Manuel utilisateur

Bright MaxTM

User Guide English ( 2 – 7 )

Guía del usuario Español ( 8 – 13 )

Guide d’utilisation Français ( 14 – 19 )

Appendix English ( 20 )

User Guide (English)

Introduction

Thank you for purchasing the Bright MaxTM. At ION, your entertainment is as important to us as

it is to you. That’s why we design our products with one thing in mind—to make your life more

fun and more convenient.

Note: Before you first use the product, please fully charge the battery. Your unit was

purposely shipped with a reduced battery charge to ensure safe transit. For optimal charging,

power off the speaker while charging.

Use the included micro-USB cable to connect the unit to a power adapter connected to a

power outlet and let it charge for up to 5 hours. This helps ensure the longest life for your

battery.

Box Contents

Bright MaxTM

Micro-USB Cable (3 ft. / 100 cm)

Quickstart Guide

Support

For the latest information about this product (documentation, technical specifications, system

requirements, compatibility information, etc.) and product registration, visit ionaudio.com.

For additional product support, visit ionaudio.com/support.

Outdoor Use and Care

Though Bright MaxTM is water-resistant and able to tolerate splashing water, please review the

tips below to get the best performance from Bright MaxTM:

•Bright MaxTM must only be used outdoors with power outlets or extension cords that are

rated for outdoor use.

•Bring Bright MaxTM indoors during extreme weather.

•Please do not place Bright MaxTM in standing water.

•Please do not connect the power adapter to Bright MaxTM in a wet environment. Make sure

the power input, power adapter, and power outlet are all completely dry before making any

connections.

•WARNING: Keep any non-water-resistant devices (phones, music players, etc.) in a dry

place where they will not be affected by water and cause a risk of electric shock.

Features

Top Panel

Power Button: Press and hold to turn Bright MaxTM on and off.

Double-press to disable or enable voice prompts.

Note: Bright MaxTM will automatically power off after 15 minutes if no audio is playing.

Bluetooth Button: Press and hold to disconnect a Bluetooth device.

Double-press to enter Bright MaxTM Multi-SyncTM mode. See Bluetooth Connecting

with Bright MaxTM to learn how to connect via Bluetooth and sync multiple compatible

speakers.

mbient Sounds Button: Press this button to enter Ambient Sounds mode.

When enabled, press the Play/Pause button to play or pause the ambient sounds.

Press the </> buttons to cycle between ambient sounds.

To exit Ambient Sounds mode, either press this button again or press the Bluetooth

button to return to Bluetooth mode.

Lights Button: Press this button to cycle between light modes. Press and hold this

button to freeze on a color during color cycling mode.

– / +

olume Buttons: Press these buttons to decrease or increase the speaker volume.

< / > Track Buttons: Press these buttons to go to the previous/next track on a Bluetooth

connected device.

Play/Pause Button: Press this button to play or pause on a connected Bluetooth

device.

Rear Panel

•Aux In: This stereo 1/8” (3.5 mm) input can be used to connect a CD player, MP3 player,

or other audio source.

•Micro-USB Speaker Charging Port: For fastest charging, power off Bright MaxTM and use

the included micro-USB cable to connect the speaker to (A) a USB power adapter (DC 5V,

not included) connected to a power outlet, or (B) your computer (powered on).

A solid red LED will appear next to the power button to indicate that the speaker is

charging. When charging is complete, the red LED will turn off.

Operation

App Control

IMPORTANT: To ensure the best possible experience with the app, use the most current

Android OS or iOS on your device.

Follow these steps to download the free app on your device:

1. Open the Apple App Store or Google Play on your device. Then, search for the ION

Sound XPTM app.

2. Follow the on-screen instructions to download and install the app. Once downloaded,

the ION Sound XPTM app will appear on your device's home screen.

3. Connect your device to Bright MaxTM via Bluetooth. See the Bluetooth Connecting with

Bright MaxTM to learn how to do this.

4. Open the ION Sound XPTM app. If prompted, allow the app to access your device's

Bluetooth and Location Services.

5. Tap to select Add A Product on the screen. The app will scan and find Bright MaxTM.

If you are having issues connecting, tap Help with setting up? for additional tips.

6. Select the Bright MaxTM icon to go to the next screen, where you can use the app to

control various functions of the speaker such as:

•Volume: Adjust the speaker volume and microphone volume.

•Voice Prompts: Enable or disable the voice prompts.

•Lights: Change the light mode and colors.

•EQ: Change the speaker’s equalization.

•Support: Visit ionaudio.com, contact Technical Support, and view Warranty

information and Frequently Asked Questions.

Bluetooth Connecting with Bright MaxTM

Connecting to one Bright MaxTM Speaker:

1. Power on the Bright MaxTM by holding down the Power button for 2 seconds. Bright MaxTM

will automatically enter Bluetooth pairing mode.

2. Navigate to your device’s Bluetooth setup screen, find Bright Max, and connect. When

connected, the Bluetooth LED will be lit solid blue and you will hear “Connected”.

Note: Do not connect to Bright Max_BLE; this is reserved exclusively for connecting to

the ION Sound XPTM app. If you experience trouble in connecting, select “Forget this

Device” on your Bluetooth device and try to connect again.

3. To disconnect, turn off Bluetooth from your device’s Bluetooth settings, or press and hold

the Bluetooth button.

Syncing multiple Bright MaxTM Speakers:

1. Connect to one Bright MaxTM speaker using the steps above. This will be the "primary"

speaker.

2. Double-press the Bluetooth button on the primary speaker to enter Multi-SyncTM mode. The

Bluetooth LED will change from blue to solid white to indicate it is in Multi-SyncTM mode.

Note: Bright MaxTM speakers should be within 100’ (30 m) of each other to properly sync. The

closer the speakers are, the faster they will sync.

Note: To exit Multi-SyncTM mode, double-press the Bluetooth button again.

3. Power on any other speakers. Press and hold the Bluetooth button on the secondary

speakers to disconnect any currently connected Bluetooth sources.

4. Double-press the Bluetooth button to enter Multi-SyncTM Mode for the secondary speakers.

The Bluetooth LED will begin flashing green and the secondary speakers should

automatically sync to the primary speakers.

5. Once a successful sync is established, the Bluetooth LED on the secondary speaker will be

lit solid green, and you will hear “Synced” from the “secondary” speaker.

Note: The Bluetooth range will be determined by the distance that your Bluetooth device is to

the “primary” speaker. See Technical Specifications for Bluetooth and Multi-SyncTM ranges.

Tip: Bright MaxTM can sync audio with other Multi-SyncTM-compatible ION Audio speakers. To

find out more, visit ionaudio.com.

Ambient Sounds

Bright MaxTM includes 5 ambient sounds that may be used for relaxation, sleep, study, and

more.

To enter Ambient Sounds mode, press the Ambient Sounds button ( ).

When enabled, press the Play/Pause button to play or pause the ambient sounds.

Press the </> buttons to cycle between ambient sounds:

•Babbling Brook

•Ocean Waves

•Rain Forrest

•Rain

•White Noise

To exit Ambient Sounds mode, either press the Ambient Sounds button ( ) again or press

the Bluetooth button to return to Bluetooth mode.

Light Modes

To cycle between light modes, press the Lights button ( ):

•Candle Flicker

•Candle Color Solid, High

•Candle Color Solid, Medium

•Candle Color Solid, Low

•Color Cycling/Phasing: Slowly phases though multiple colors. While color cycling,

press and hold the Lights button to freeze on the current color. Press and hold the

Lights button again to return to color cycling.

•Color Cycling/Beat Sync: Slowly phases through multiple colors and reacts to the

beat of music being played.

•Off

Troubleshooting

If the unit is not charging: Make sure the micro-USB cable is properly connected to the

power input, the power adapter and the power outlet.

If the sound is distorted: Try lowering the volume control of your sound source.

If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower

the bass level. This will allow you to play the music louder before clipping (distortion) occurs.

If you cannot connect your audio device to Bright MaxTM via Bluetooth:

•Have your audio device (e.g., smartphone or tablet) and Bright MaxTM as close together as

possible while trying to connect. Make sure both the audio device and Bright MaxTM are

unobstructed by walls, furniture, etc.

•Reset the Bluetooth connection on Bright MaxTM to disconnect Bright MaxTM from any

other audio device and restart the search process. If this does not work right away,

power off Bright MaxTM and then power it back on. See Bluetooth Connecting with

Bright MaxTM for more information.

•Reset the Bluetooth connection on your audio device by turning Bluetooth off and back

on. You can find this under the Bluetooth menu in the Settings for your phone or other

audio device.

If this does not work, and you have connected to Bright MaxTM before, find Bright MaxTM in

the list of available or previously connected devices in your audio device's Bluetooth

menu, tap the "gear" or “i” icon located next to it and then select Unpair or Forget. Turn

Bright MaxTM off and back on and try pairing again once it reappears in your available

devices list.

Note: If Bright MaxTM has been paired to another audio device recently that is still within

range, you may need to repeat this process with that audio device to fully disconnect.

If you experience audio dropouts while playing music from a Bluetooth device, this may

be happening because your unit is trying to link to another speaker. This can occur if you

power off a speaker that was linked to your unit or if you have just turned on your unit and it is

in Multi-SyncTM mode. To stop the audio dropouts, exit Multi-SyncTM mode by double-pressing

the Link button. Alternatively, you can wait for your unit to link to another Bright MaxTM

speaker if there is one within range.

If you would like to stop your speaker from automatically linking when you power it on,

make sure you double-press the Bluetooth button to exit Multi-SyncTM mode before you

power it off.

Autres manuels pour Bright Max

Table des matières

Autres manuels ION Intervenants

ION

ION Solar Stone Multi Manuel utilisateur

ION

ION KEYSTONE Manuel utilisateur

ION

ION Insta Sound Manuel utilisateur

ION

ION Tailgater Flash Manuel utilisateur

ION

ION PROFILE FLASH Manuel utilisateur

ION

ION Clipster Manuel utilisateur

ION

ION TAILGATER GO Manuel utilisateur

ION

ION WATER ROCKER Manuel utilisateur

ION

ION SPORT iPA84A Manuel utilisateur

ION

ION IPA150X Manuel utilisateur

ION

ION Explorer XL Manuel utilisateur

ION

ION Total PA Pro Manuel utilisateur

ION

ION PARTY ROCKER Manuel utilisateur

ION

ION BLOCK ROCKER BLUETOOTH Manuel utilisateur

ION

ION Block Party Live Manuel utilisateur

ION

ION Rock Manuel utilisateur

ION

ION Block Rocker Series Manuel d'utilisation et d'entretien

ION

ION PROFILE LP Manuel utilisateur

ION

ION Clipster Active Manuel utilisateur

ION

ION Dunk Manuel utilisateur

ION

ION Stadium Manuel utilisateur

ION

ION PARTY ROCKER Manuel utilisateur

ION

ION Insta Party Manuel utilisateur

ION

ION Pickup Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur