IOGear GUWAVKIT Manuel utilisateur

Installation

Installation Guide

Wireless Audio / Video Kit

GUWAVKIT

Table of Contents

System Requirements 4

Important Information 5

Package Contents 6

Device Overview 7

Preparing for Setup 10

Software Installation – Windows XP 13

Software Installation – Windows Vista 17

Install Wireless USB Transmitter 21

Install Wireless VGA Receiver 22

Installing Wireless Audio Receiver 28

Connecting the Audio Receiver to Speakers 31

Advanced Settings – Wireless USB Manager 33

Advanced Settings – Video Mode Conguration 35

Advanced Settings - Screen Resolution Conguration 38

Advanced Settings - Wireless USB Transmitter Settings 41

Advanced Settings - Wireless USB Transmitter Selection 43

Advanced Settings - Wireless USB Transmitter Reset 44

Advanced Settings - Wireless VGA Receiver in Wired Mode 45

Trouble Shooting Guide 46

Technical Specications 67

Appendix 68

Limited Warranty 70

Federal Communications Commission (FCC) Statement 71

Contact 72

System Requirements

Microsoft Windows® XP (SP2) or Vista (32- / 64-bit) with available USB 2.0 port•

1.6 GHz processor (CPU) with 1GB of system memory (RAM)•

Flat-panel (LCD / Plasma / DLP) TV display or Projector with VGA (RGB / D-sub•

15-pin / PC) or DVI port (Does NOT work with CRT tube TV and DVI-D connector)

TV or audio system with 3.5mm audio jack or RCA connectors•

Minimum system requirement to play online video clips in a “window” – 1.6 Ghz

Atom™ with 1GB RAM, 480p video in a “window” – 1.8 Ghz Pentium™ M with 1GB

RAM, 720p video in a “window” – 2.8 GHz Pentium™ M with 1 GB RAM, 720p

video in “full screen” – 2.8 GHz Core™ 2 Duo with 1GB RAM.

Important Information

Before you get started, please NOTE:

Do not place Wireless USB devices under direct sunlight or near high heat emitting devices;

Do not place Wireless USB devices near water or wet surfaces to avoid electric hazards;

Do not place Wireless USB devices on any moving or unstable surfaces.

Package Contents

LINK PWR

• 1 x Wireless Video

Receiver (for display)

• 1 x Wireless Audio

Receiver (for stereo)

• 1 x Wireless USB

Transmitter (for

computer)

• 1 x USB 2.0 A to mini-B cable (3 ft.)

• 1 x USB 2.0 extension cable (4 ft.)

• 1 x Gold Plated VGA cable (6 ft.)

• 1 x VGA (F) to

DVI-A adapter

• 1 x 3.5mm to 3.5mm cable

• 1 x 3.5mm to RCA cable • 1 x Hook-and-loop

fastener

• 1 x Power adapter for Audio Receiver

• 1 x Power adapter for Video Receiver

• 1 x User Manual

• 1 x Installation CD

• 1 x Warranty /

Registration Card

Device Overview

1. LINK: Data Transfer Activity Indicator

LED blinks when data is being transferred-

2. PWR: Power

LED is solid when powered by the PC-

3. USB Connector

Connect to any available USB 2.0 port on your computer-

LINK PWR

Wireless USB Transmitter

132

5 6 7 8 94

Wireless Video Receiver

1. VGA : VGA Activity Indicator

LED is solid when display cable is-

connected

LED is blinking when data is being-

transferred

2. PWR: Power Indicator

LED is solid when power is applied-

3. Status Indicator

Single* solid light: device is wirelessly-

connected to the selected Wireless USB

Transmitter

Single* slowly blinking light: device-

is searching for a Wireless USB

Transmitter

Single* quickly blinking light: device is-

trying to connect to a Wireless USB

Transmitter

Rapidly scrolling lights: device is used in-

wired mode.

Three Simultaneous Blinking Lights:-

Cable Association Mode

*Only one light at a time. The position

of the light indicates which Wireless

USB Transmitter the device is trying to

communicate with.

4. VGA Connector

Connects to one end of the included-

VGA cable, and the other end to the

VGA or DVI port on your display

5. Power Plug

Power adapter socket-

6. RESET Button

Association history can be erased by-

pressing and holding this button for 10

seconds. (Please visit P.44 for details)

7. HOST Button

This button is used to select a different-

Wireless USB Transmitter. (Please visit

P.43 for details)

8. Mini-B USB port

In wireless mode, this port is used-

for cable association. (Please visit

Appendix for details)

In wired mode, connect the VGA-

adapter with the USB cable via this port

for wired operation. (Please visit P.45

for details)

9. WIRELESS/WIRED switch

Choose from wired or wireless mode by-

using this switch - P.45

Wireless Audio Receiver

1. Power/Activity LED

LED is solid when connection is established-

LED is blinking when power is on and connection is not established-

2. 3.5mm Audio Socket

Connects to the 3.5mm audio connector of the included 3.5mm or RCA audio cable,-

and the other end to the available 3.5mm audio socket or RCA audio socket on your

display or stereo system

3. Mini-B USB Port

Connects to the mini-B end of the included USB cable, and the Type-A end to an-

available USB port on your computer to create association between your computer and

the audio receiver

4. Power plug

Power adapter socket-

Preparing for Setup

Before you begin, please make sure to properly remove all previously installed

Wireless USB Manager and DisplayLink drivers from your system to avoid driver

conict. To properly remove previously installed drivers, please follow below

instructions.

Go to Start -> Control Panel -> Add or Remove Programs1.

Select any previously installed DisplayLink software and click on2. Remove button to

properly uninstall the program.

For Windows XP users

After all DisplayLink software are uninstalled, please restart your system.3.

Repeat steps 1 and select any previously installed Wireless USB drivers and click on4.

Remove button to properly uninstall the program.

Autres manuels pour GUWAVKIT

Table des matières

Autres manuels IOGear Récepteur

IOGear

IOGear GUWAVKIT3 Manuel utilisateur

IOGear

IOGear GW3DHDKIT Manuel utilisateur

IOGear

IOGear GWMHDRX Manuel utilisateur

IOGear

IOGear GWHDRX01 Manuel utilisateur

IOGear

IOGear GW4K30GH60KIT Manuel utilisateur

IOGear

IOGear Bluetooth Audio Transport GBMH221W6 Manuel utilisateur

IOGear

IOGear GWSSKIT Instructions d'utilisation et d'entretien

IOGear

IOGear Share Pro USB-C GWHDKIT11C Manuel utilisateur

IOGear

IOGear GWHD11 Manuel utilisateur

IOGear

IOGear GUWAVKIT4B Manuel utilisateur

IOGear

IOGear Share Pro GWHD2DKIT Manuel utilisateur

IOGear

IOGear GWAV8141K Manuel utilisateur

IOGear

IOGear GUW101A Manuel utilisateur

IOGear

IOGear GWAVRC Manuel utilisateur

IOGear

IOGear GWAVRC Manuel utilisateur

IOGear

IOGear GUWAVKIT Manuel utilisateur

IOGear

IOGear GWHD11 Manuel utilisateur

IOGear

IOGear GUWAVKIT Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur