INVENTOR DRVI32-09WF Manuel utilisateur

MODELS:

DRVI32-09WF

DRVI32-12WF

DRVI32-18WF

DRVI32-24WF

REMOTE CONTROLLER

AIR CONDITIONING SYSTEMS

• USER’S MANUAL

• MANUAL UTILIZATORULUI

WARNING:

·If the supply cord is damaged, it must be replaced by the manufacturer,its service agent or

similarly qualified persons in order to avoid a hazard.

·This appliance can be used by children aged 8 years and above and persons with reduced

physical, sensory or mentao capabilities or lack of experience and knowledge if they have

been given superivision or instruction concering use of the appliance in a safe way and

understand the hazards involved. Children shall not play with the appliance. Cleaning and

·The wiring method should be in line with the local wiring standard.

user maintenance shall not be made by children without supervision.

All the cables shall have got the European authentication certificate. During installation, when the

·connecting cables break off, it must be assured that the grouding wire is the last one to be broken off.

The explosion-proof breaker of the air conditioner should be all-pole switch. Distance between its two

contacts should not be no less than 3mm. Such means for disconnection must be incorporated in the

·Make sure installation is done according to local wiring regulation by professional persons.

·A leakage explosion-proof breaker must be installed.

Make sure ground connection is correct and reliable.

Read the precautions in this manual

carefully before operating the unit. This appliance is filled with R32.

Do not use means to accelerate the defrosting process or to clean, other than those

recommended by the manufacturer.

Keep thismanualwhere the user can easily nd it.

The appliance must be stored in a room without continuously operating ignition sources (for

example: open flames, an operating gas appliance or an operating electric heater).

Do not pierce or burn.

·Be aware that refrigerants may not contain an odour.

·The appliance must be installed, operated and stored in a room with a floor area larger than

3 .

·Do not use a refrigerant other than the one indicated on the outdoor unit(R32) when installing,

moving or repairing. Using other refrigerants may cause trouble or damage to the unit, and

personal injury.

wiring.

Please read this operation manual before using the air conditioner.

Keep this operation manual for future reference

This appliance is filled with R32.

001

Contents

PARTS AND FUNCTIONS

OPERATION

INDOOR UNIT INSTALLATION

MAINTENANCE

CAUTIONS

TROUBLE SHOOTING

Parts and Functions

Indoor Unit Remote controller

Outer side of the controller

89status

711

TIMER

611. FAN SPEED display

SWING display

Swing up/down display

swing left/right display

TIMER ON display

TIMER OFF display

CLOCK display

12.

413.

Display board 12

316

1Signal receiver hole

Ambient temp.display

When receiving the remote

4614. FAN button

2SMART 17

24HEAT display

1POWER

control signal, display the set

temperature.

5HEALTH display

3COOL display 6DRY display

1. POWER button

2. DRY button

Used to set DRY operation.

COOL button

Used to set COOL operation.

TEMP button

used to change setting

temperature

Actual inlet grille may vary from the one shown in the

manual according to the product purchased 3.

Outdoor Unit

NOTE:

OUTLET CONNECTING PIPING

AND ELECTRICAL WIRING

DRAIN HOSEINLET

5. ON / OFF button

6. Display of each function

7. Operation mode display

8. WIFI and CLOCK display

9. TEMP display

10. Humidity display

15. QUIET button

16. HEAT button

17. SMART button

Used to set SMART

operation. (This function

is unavailable on some

models.)

a. Humidity display is unavailable on some models

b. If the model you buy has a WIFI function, press the“ON/OFF”

button for 5s to emit the WIFI binding signal. Once in the

binding mode, the APP will show how to bind.

Outlet

Display board

Horizontal flap

(adjust up and down air flow

Don't adjust it manually)

(adjust left and

ow)

Vertical blade

Emergency

Switch

right air fl

Inlet

Air Purifying Filter

(inside)

Inlet grille

Anion generator

(inside)

Operation

18. TIMER button

19. CLOCK button

10 ºC button

special heating set

function: 10 degree

heating maintaining

(valuable for RS)

Clock set

20. 1Press CLOCK button,

2Press “+” or “-” to set

correct time.

Each press will increase or

decrease 1min. If the button is

kept pressed, time will change

quickly.

23 24

22 25 3

21 26 FAN MODE

20 27

19 28

18 29 press APPLY, “AM” and

starts working.

Note: Note:

The distance between the signal transmission head and

the receiver hole should be within 7m without any obstacle

change-over wireless telephone is installed in the type

in receiving the signals, so the distance to the indoor unit

should be shorter.

Full display or unclear display during operation indicates the

batteries have been used up. Please change batteries.

If the remote controller can’t run normally during operation,

please remove the batteries and reload several minutes later

Hint:

Remove the batteries in case unit won’t be in usage for

a long period.

21. HEALTH button

22. FAN MODE button

23. SWING up/down button

24. SWING left/right button

25. SLEEP button

26. HEALTH AIRFLOW button

27. LIGHT button

Control the lightening and

extinguishing of the indoor

LED display board.

28. CODE button

A-b yard

29. APPLY button

30. °F/°C button

FAN MODE

Press “HEALTH”+“HEALTH AIRFLOW” simultaneously can

set and cancel the “LOCK” function ( )

nnooiittaarreeppOO

QUIET OperationQUIET Operation nnooiittaarreeppOOYYRRDDddnnaaTTAEH, AEH,LOOC LOOC

1Unit start.

2Select operation mode.

Press the COOL button on

the remote control.

SMART QUIET Operation SMART

POWER POWER

TTEEIIUUQQ

Press the HEAT button on the remote control.

You can use this function when silence is needed for rest or

reading.

For each press, is displayed Air conditioner starts

QUIET function operation. In QUIET operation mode, fan

speed automatically takes low speed of AUTO fan mode.

Press QUIET button again, disappears, the operation

stops.

Press the DRY button on the remote control.

1. In DRY mode, when room temperature becomes

lower than temp. setting +2 ºC, unit will run

intermittently ai LOW speed regardless of FAN

setting.

2. Remote controller can memorize each operation

status. When starting it next time, just press ON/

OFF button and unit will run in previous status.

Operation

1button.

pressed, temp. setting

increases ºC.

pressed, temp. setting

decreases ºC.

Unit will start running to reach the

temp. setting on LCD.

SMART

POWER

2AN Operation

changes as follows:

Unit will run at selected fan speed.

SMART Operation

(This function is unavailable on

some models)

One key can give you a

comfortable room!

The air conditioning unit can

judge the indoor temperature and

humidity, and make the adjustment

accordingly.

SMART

SMART start

Press ON/OFF button, unit starts.

Press SMART button “ ” is

displayed on the remote controller.

SMART

POWER

Operation

HEALTH AIRFLOW Operation FAN MODE Operation

The setting of

function

FAN

MODE

Fan mode: default low fan speed,fan

mode , the setting temperature will

not display, the temperature of indoor

display is 24℃

appears on the display. Avoid

the body.

TIMER

again, appears on the display.

direct to the body.

FAN MODE

The cancel of

function

and outlet grills of the air conditioner are opened, and

the unit goes on working under the condition before the

grille will close automatically.

Notice:

Cannot pull direct the outlet grille by hand. Otherwise, the

grille will run incorrectly. If the grille is not run correctly,

stop for a minute and then start, adjusting by remote

controller.

Remote controller can memorize each operation status.

when starting it next time, just press ON/OFF button and

unit will run in previous status.

Note:

mode.

2. In heating, it is better to select the

3. In cooling, it is better to select the

4. In cooling and dry, using the air conditioner for a

long time under the high air humidity, a phenomenon

falling drips of water occurs at the outlet grille.

5. Select the appropriate fan direction according to the

actual conditions.

When humidity is high, condensate water might occur

at air outlet if all vertical louvers are adjusted to left or

right.

position for a long time in COOL or DRY mode,

otherwise, condensate water might occur.

better air circulation

Operation

SWING Operation TIMER Operation

Set Clock correctly before starting Timer operation. You can

let unit start or stop automatically a following times: Before

you wake up in the morning, or get back from outside or

after you fall asleep at night.

1Select your desired operation

mode.

For each press of “ ” button, air Select your desired

TIMER ON.

displays as follows according to

different operation modes: Remote controller: “

TIMER ON

”

TIMER

COOL/DRY: Select your desired

TIMER OFF.

FAN MODE HEAT: Remote controller: “

TIMER OFF

”

FAN MODE

SMART: 2Time setting.

Initial state

2Every time the button is pressed,

time setting increases or decreases

1 min, if kept depressed, it will increase rapidly. It can be

adjusted within 24 hours.

For each press of “

displays as follows:

remote controller:

” button, remote controller

APPLY

“

” or “

OFF

”

Initial state

To cancel TIMER mode

Just press TIMER button several times until TIMER

dispiay disappear.

Operation

Comfortable SLEEP

3 hours then stops. Temp. is lower than temp. setting

so that room temperature won’t be too high for your

sleep.

Before going to bed, you can simply press the SLEEP

button and unit will operate in SLEEP mode and bring you

a sound sleep.

Press SLEEP

button. Temp. setting Unit stop

1 hr Decreases 2 ºC

Operation Mode

1. In COOL, DRY mode

1 hours after SLEEP mode

starts, temp. will become 1 ºC

higher than temp. setting. After

another 1 hours, temp. rises by

1 ºC further. The unit will run for

further 6 hours thenstops Temp.

is higher than temp. setting so

that room temperature won’t be

too low for your sleep.

1 hr

Decreases 2 ºC

3 hrs

3 hrs Rises 1 ºC

SLEEP

operation starts

SLEEP

operation stops

In HEAT mode

FAN MODE

4. When quiet sleeping function is set to 8 hours the

quiet sleeping time can not be adjusted. When TIMER

function is set, the quiet sleeping function can’t be

set up. After the sleeping function is set up, if user

resets TIMER function, the sleeping function will be

cancelled; the machine will be in the state of timing-

on, if the two modes are set up at the same time, either

automatically, and the other mode will be cancelled.

Power Failure Resume Function

not start running unless 3 minutes have elapsed. When

the power resumes after power failure, the unit will run

automatically, and 3 minutes later the compressor starts

running.

Note to the power failure resume:

SLEEP

operation starts

SLEEP

operation stops

Approx. 6hrs

1 hr Rises 1 ºC

Temp. setting Unit stop

In COOL, DRY mode

enter function after hearing four sounds. And press the

this function after hearing two sounds.

2. In HEAT mode

1 hours after SLEEP mode starts, temp will become

2 ºC lower than temp. setting. After another 1 hours,

temp decrease by 2 ºC further. After more another

3 hours, temp. rises by 1 ºC further. The unit will run for

further

Autres manuels pour DRVI32-09WF

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels INVENTOR Climatiseur

INVENTOR

INVENTOR V2CI-12 Manuel utilisateur

INVENTOR

INVENTOR A2MVO-09 Manuel utilisateur

INVENTOR

INVENTOR AR1MVO-09 Manuel utilisateur

INVENTOR

INVENTOR V4MCI-24UR Manuel utilisateur

INVENTOR

INVENTOR L2VO-18 Manuel utilisateur

INVENTOR

INVENTOR L5VI32-09WFR Manuel utilisateur

INVENTOR

INVENTOR DRVI32-09WF/DRVO32-09 Manuel utilisateur

INVENTOR

INVENTOR LCAC Manuel utilisateur

INVENTOR

INVENTOR V4MVI-12WFR Manuel utilisateur

INVENTOR

INVENTOR V5MLO32-12 Manuel utilisateur

INVENTOR

INVENTOR GR1VI32-12WF Manuel utilisateur

INVENTOR

INVENTOR ICI-12 Manuel utilisateur

INVENTOR

INVENTOR DR2VO32-09 Mode d’emploi

INVENTOR

INVENTOR NUVI-09WF Manuel utilisateur

INVENTOR

INVENTOR V4MRFI-24 Manuel utilisateur

INVENTOR

INVENTOR LDVI-09WFI/LDVO-09 Mode d’emploi

INVENTOR

INVENTOR V4MDI-12 Manuel utilisateur

INVENTOR

INVENTOR C1VI-09 Manuel utilisateur

INVENTOR

INVENTOR DR2VI-09WFI Manuel utilisateur

INVENTOR

INVENTOR O3MVO32-09 Manuel utilisateur

INVENTOR

INVENTOR FSAI-SU-93AE3 Manuel utilisateur

INVENTOR

INVENTOR V1DI-09 Manuel utilisateur

INVENTOR

INVENTOR AUS-09H53R010L6 Manuel utilisateur

INVENTOR

INVENTOR C1VI-09 Manuel utilisateur

Manuels Climatiseur populaires d'autres marques

Spheros

Spheros CC 355 Manuel utilisateur

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manuel utilisateur

Panasonic

Panasonic CS-E12HKEW Manuel utilisateur

nedis

nedis ACMB1WT7 Manuel utilisateur

Samsung

Samsung AR KV Series Mode d’emploi

Daikin

Daikin FCFV50A Manuel utilisateur

Fujitsu

Fujitsu Inverter ASBA30JFC Manuel utilisateur

Toshiba

Toshiba RAS-M10SMUV-E Manuel utilisateur

Daikin

Daikin FXLQ20MAVE Manuel utilisateur

Hitachi

Hitachi RAS-E24CAK Manuel utilisateur

CIAT

CIAT Magister 2 Series Mode d’emploi

Bestron

Bestron AAC6000 Manuel utilisateur

Hisense

Hisense 7K Manuel technique

Frigidaire

Frigidaire FFRE0533S1E0 Manuel utilisateur

Samsung

Samsung AS09HM3N Manuel utilisateur

Frigidaire

Frigidaire CRA073PU11 Manuel du propriétaire

Soleus Air

Soleus Air GB-PAC-08E4 Manuel utilisateur

McQuay

McQuay MCK020A Manuel utilisateur