Inventec 2509 Manuel utilisateur
Confidential Information. All Rights reserved by Inventec Multimedia & Telecom Corp.
Confidential Information. All Rights reserved by Inventec Multimedia & Telecom Corp.
C A T A L O G
Chapter I Product Information
1-1 Package Contents
1-2 Features & System Requirements
1-3 Basic Setup
Chapter II System Setup and Basic Operating
2-X Network Setup (Static IP Address)
2-X Network Setup (DHCP / Auto IP Address)
2-X Network Setup (PPPoE Client)
2-2 Network Setup (Web Configuration)
2-3 SIP Server Information Setup
2-4 SIP Server Information Setup (Web
Configuration)
2-5 Accepting and Making Phone Calls
2-6 Calling History
2-7 Call Rejection (DND)
2-8 Using Speakerphone and Headset
Chapter III Advanced Functions and Configurations
3-1 Speed Dial & Advanced Phone Configuration
3-2 Phone Book Management
3-3 Browse System Information
3-4 Change Display Language
3-5 Change Ringer Type
3-6 Adjust the Contrast of LCD Screen
3-7 Select DTMF Modes
3-8 Reboot the IP Phone
Confidential Information. All Rights reserved by Inventec Multimedia & Telecom Corp.
3-9 Factory Reset
Chapter IV Appendix
4-1 Troubleshooting
4-2 Specification
4-3 Firmware Update
4-4 Recover from Unsuccessful Firmware
Update
4-5 Change the Administration Password for
Web Config
4-6 FCC Statements
Confidential Information. All Rights reserved by Inventec Multimedia & Telecom Corp.
1-1 Package Contents
Thank you for purchasing this IP Phone! Before you continue,
here is a list of all contents in your IP Phone package. Please
contact your dealer if any of them is not in your IP Phone
package.
IP Phone (Main Body) 1 pcs
Handset 1 pcs
Handset Cable 1 pcs
A/C Power Adapter 1 pcs
Network Cable 1 pcs
Phone Stand 1 pcs
Confidential Information. All Rights reserved by Inventec Multimedia & Telecom Corp.
1-2 Features & System Requirements
Thanks again for choosing this IP Phone. This IP Phone is a
sophisticated, state-of-the-art internet phone system. Instead of
using conventional PSTN (land line) phone line, it uses IP data
stream to deliver and receive voice calls through internet, you
can make free* calls to other IP Phone, or making / accepting
calls to / from regular land line phone / mobile phone, and the
cost is much cheaper.
*
Depending on your service provider. In most cases making
phone call to another IP phone via internet is free.
For additional features of this IP Phone, please refer to
following list:
1. Multi-protocol support: This IP phone supports multiple
network protocols for communication and management:
TFTP, FTP, RTP, SNTP, HTTP, SIP, DHCP, PPPoE, and
Telnet.
2. QoS Support: Maximizes network performance.
3. Supports all major network connecting methods.
4. Supports headset and speakerphone for hands-free
operation.
5. Standard CCITT numeric keypad (0-9, * and #) providing
fully phone dialing support, with built-in DTMF tone
generator (You can use numeric keypad to access on-line
banking service, dial extension number…etc.).
6. Large, clear LCD display for information and phone status.
7. Comfortable handset, best for long time operation.
8. 5 speed-dial keys.
9. Access all advanced settings by web browser of your
Confidential Information. All Rights reserved by Inventec Multimedia & Telecom Corp.
computer. You can also access this IP Phone’s advanced
configuration menu by telnet.
10.Built-in Ethernet switch: One for internet, and one for your
computer.
11.Silence suppression, acoustic echo cancellation, and
dynamic jitter buffer technology for better voice quality.
12.Call-ID display
2
.
13.The ability of upgrading internal firmware: You can enjoy
new functions of this IP Phone when new firmware is
available.
14.<OPTIONAL> Supports IEEE 802.3af Power-over-Ethernet,
this IP phone can get required electrical power by ethernet
cable, therefore no A/C power adapter is required
1
1
This IP Phone must connect to a switch or hub that supports
Power-over-Ethernet, and proper ethernet cable is required.
2
Depending on service provider.
To use this IP Phone, following items are required:
1. One electrical power outlet, or network hub / switch with
Power-over-Ethernet function.
2. Network Configuration Table, provided by your service
provider.
Confidential Information. All Rights reserved by Inventec Multimedia & Telecom Corp.
1-3 Basic Setup
Before you can use this IP Phone, there’re few steps required.
Please follow the following instructions to setup the IP Phone,
and make it ready to use.
1. Unpack the package, and check if any item is missing.
2. Insert the Ethernet cable (which is connecting to the router
in your network environment. If you use this IP Phone in
your home, in most cases, the router is your ADSL or cable
modem device provided by your ISP; If you use this IP
phone in office, please connect to a network socket near
you, or ask your network administrator).
3. Install the phone stand as described in following picture.
Confidential Information. All Rights reserved by Inventec Multimedia & Telecom Corp.
4. Insert one end of handset cable to handset, as shown below.
5. Insert another end of handset cable to the handset socket
on the phone, as shown below:
Confidential Information. All Rights reserved by Inventec Multimedia & Telecom Corp.
6. Insert the A/C power adapter to the power socket.
7. Insert the power jack of A/C power adapter to this IP Phone,
as shown below.
Confidential Information. All Rights reserved by Inventec Multimedia & Telecom Corp.
8. You should see some text on the LCD screen of IP phone
now. If not, please redo step 5 to 6 until you can see some
text on the LCD screen.
03:12 09/09 0123456
VoIP SIP Phone
Redial
Table des matières
