Invengo XC2907-A Manuel utilisateur
User’s Manual
XC2907-A Portable Reader
Invengo Information Technology Co., Ltd.
Thank you for using Invengo’s RFID products!
We are very glad that you chose this XC2907-A portable reader. We hope
that the equipment can facilitate your work. The picture is for reference
only and the physical product shall be subject to.
Foreword
This manual applies to the following model:
XC2907-A portable reader.
This manual provides information on the use, maintenance and other
features of the product for the product users and maintenance personnel.
or trademark belongs to Invengo.
All instructions and descriptions of product features and functions
in this manual, as well as other information, are up-to-date and valid
information. All information is accurate when printed. INVENGO
reserves the right to correct or change the information and instructions
in this manual without prior notice or any liability.
Because of your special needs, some features of the product will vary
depending on the conguration.
Safety Instructions
Warning sign
If operate improperly, it may result in damage to your equipment(s).
Attention
If ignored, it may result in unsuccessful operation
If ignored, it may cause undesirable eect
1. Product overview ........................................................................1
1.1 Product prole .................................................................................................. 1
1.2 Main usage and application scope ................................................................. 1
1.3 Working environment and conditions ............................................................ 1
1.4 Safety and protective measures ..................................................................... 2
2. Performance parameters ...........................................................2
2.1 Main functions .................................................................................................. 2
2.2 Technical parameters ....................................................................................... 2
3. Dimensions and weight ............................................................. 5
3.1 Dimensions ....................................................................................................... 5
3.2 Weight ................................................................................................................ 6
4. Structural characteristics and operating principle ................. 6
4.1 Appearance description ................................................................................... 6
4.2 Installation and removal of battery ................................................................. 7
4.3 Shutdown / Standby / Restart .......................................................................... 7
5. Common functions and settings ...............................................8
5.1 Data synchronization between installing USB drive and PC ....................... 8
5.2 Backlight regulation ......................................................................................... 9
5.3 Volume and sound ............................................................................................ 9
5.4 Instructions for All-Netcom Network (data) ................................................. 10
5.5 Wi-Fi instructions ........................................................................................... 10
Content
5.6 Instructions for Bluetooth ..............................................................................11
5.7 Instructions for GPS ....................................................................................... 12
5.8 Instructions for barcode module .................................................................. 12
5.8.1 Technical specication and support format for barcode engine .......................... 12
5.8.2 Barcode reading of demo software ..................................................................... 13
5.9 Instructions for camera .................................................................................. 13
6. Introduction for RFID module ..................................................14
6.1 Description of RFID module .......................................................................... 14
6.1.1 Module instruction .............................................................................................. 14
6.1.2 Technical parameters of RFID module ............................................................... 14
6.2 Instructions for API interface program ......................................................... 15
6.3 Instructions for demo software ..................................................................... 15
6.3.1 Demo software application environment ............................................................ 15
6.3.2 Software installation and start-up ........................................................................ 15
6.3.3 Software running ................................................................................................. 16
6.4 Main operating instructions for demo software .......................................... 17
6.4.1 Scan Setting ......................................................................................................... 17
6.4.2 Power setting ....................................................................................................... 18
6.4.3 Tag lter conguration ........................................................................................ 19
6.4.4 Search the tag ...................................................................................................... 20
6.4.5 Session conguration .......................................................................................... 20
6.4.6 Q value conguration .......................................................................................... 21
7. Tag operation ............................................................................ 21
7.1 Writing EPC ..................................................................................................... 22
7.2 Read user eld data ....................................................................................... 23
7.3 Write user eld data ....................................................................................... 23
7.4 Writing BANK .................................................................................................. 24
7.5 Wiping BANK .................................................................................................. 24
7.6 Conguration password ................................................................................ 25
7.7 Congure lock status ..................................................................................... 26
7.9 EAS logo conguration .................................................................................. 27
7.10EAS Monitoring conguration ...................................................................... 28
7.11EPC lter ......................................................................................................... 28
8. Precautions ...............................................................................29
8.1 Description of use of power saving .............................................................. 29
8.2 Exception declaration .................................................................................... 29
8.3 The correct mode to replace the battery ...................................................... 30
9. Daily maintenance and troubleshooting ................................ 30
9.1 Routine maintenance ..................................................................................... 30
9.2 Analysis and troubleshooting of common problems ................................. 31
9.3 RF communication optimization ................................................................... 32
9.3.1 Signal interference problem ................................................................................ 33
9.3.2 Information attenuation / reection ..................................................................... 33
10. Transport and storage ............................................................ 35
10.1 Transport requirements ............................................................................... 35
10.2 Storage requirements .................................................................................. 35
11. Packing and unpacking inspection ....................................... 36
11.1 Packing descriptions .................................................................................... 36
11.2 Unpacking ..................................................................................................... 36
12. After-sales service method .................................................... 37
12.1 After-sales service ........................................................................................ 37
12.2 Other items .................................................................................................... 37
User Manual
XC2907-A Portable Reader 1
1. Product overview
1. Product overview
1.1 Product prole
Welcome to use XC2907-A portable reader. This portable reader is a new
portable reader developed by our company in combination with the needs of IOT
application scenarios. This product is an intelligent and multi-functional UHF-
RFID tag reader with fast processing speed, good portability and high functional
integration.
Figure 1-1 XC2907-A portable reader
1.2 Main usage and application scope
With abundant functions, XC2907-A portable reader can be widely applied
in multiple elds, such as: clothing retail, warehouse management, asset
management, textile washing, etc.
1.3 Working environment and conditions
XC2907-A portable reader has the following specic requirements for the
working environment:
Working temperature: -20℃ ~ 50℃
Storage temperature: -20℃ ~ 70℃
Working humidity: 5%-95% (non-condensing, +25℃)
User Manual
XC2907-A Portable Reader 2
2. Performance parameters
Storage humidity: 5%-95% (non-condensing, +25℃)
1.4 Safety and protective measures
When this reader works (radiated microwave), don't aim at people and animals
for a long time!
Before using, please refer to the contents in the precautions.
Any radio transmission equipment, including this equipment, may interfere with
the work of medical equipment without proper protection. If there is a problem,
consult the manufacturer of the medical equipment concerned. The work of the
equipment may interfere with other electronic equipment.
2. Performance parameters
2.1 Main functions
●Support EPC Global UHF Class 1 Gen 2/ISO18000-6C and ISO1800-6B
protocols;
●Support the wireless transmission of data information via 4G network (data),
Wi-Fi, Bluetooth, etc.;
●Support GPS positioning;
● Support the identication and reading of mainstream 1D and 2D barcodes
●Support the camera
●Users can easily master the usage with a simple operating interface
●Support touch screen and Chinese character/data input
●Provide Java SDK and standard environment for secondary development
2.2 Technical parameters
The performance parameters are shown as Table 2:
Table 2 Performance parameters
User Manual
XC2907-A Portable Reader 3
2. Performance parameters
Processor 8-core 64-bit processor
Memory System memory: RAM: 4GB+ROM: 64GB (Standard
conguration)
Operating system Android 10.0
Power supply
Main battery: Polymer lithium ion 3.7V 4900mAh/9000mAh
Adapter: AC input: 100V~240V/50Hz~60Hz
DC output: DC5V/2A
Battery life: More than 14 hours for normal use, more than
200 hours for standby mode
Working state: Real-time monitoring of battery voltage,
residual power and charging status
Development environment
Operating environment: Android 10.0
SDK: INVENGO software development kit
Development language: Java
Development tool: Eclipse/Android Studio
Application software
RFID Demo barcode demo software
Barcode demo software
UHF-RFID module
Support protocol: EPC Global UHF Class 1 Gen 2/
ISO18000-6C/ISO1800-6B
Working frequency: 920-925MHz
Output power: 0dBm ~ 30dBm (stepping 1dB)
Debug mode: PR-ASK
Read-write distance: 0~10.0m for reading tags, 0~5m for
writing tags (specic tag and environment)
Maximum tag capacity:
●EPC area supports 62 bytes at most
●TID area supports 16 bytes at most
● User data eld supports 8K bytes at most
WWAN (China) All-Netcom
4G TDD: B38/B39/B40/B41
FDD: B1/B3/B5/B7
3G WCDMA: B1/B5/B8
2G GSM/GPRS/Edge
(850/900/1800/1900MHz)
User Manual
XC2907-A Portable Reader 4
2. Performance parameters
Wi-Fi Function
Support protocol: IEEE802.11a/b/g/n
Communication rate: 2.4GHz and 5GHz dual-band
Transmission distance:
●Indoor 20m (No obstacles)
●Outdoor 50m (No obstacles)
Bluetooth function
Bluetooth V4.2
• If the distance is less than 10m (no obstacles), play music
without noise with Bluetooth headset; If the distance is less
than 8m, talk with Bluetooth headset without noise;
• If the distance is less than 4m (no obstacles), the les can
be normally transmitted and received through the Bluetooth
function.
GPS positioning
GPS/Beidou (optional)
Error ±5m
Barcode engine
Support code system:
• 1D code system: Code39, Code93, Code128, Codebar,
EAN-13, EAN-8, UPC-A, UPC-E, ITF14, UCC/EAN-128,
ITF25, Matrix25, EAN-128, ISBN, etc.
• 2D code system: PDF417, MicroPDF417, Composite,
RSS, TLC-39, Datamatrix, QRcode, MicroQRcode, Aztec,
MaxiCode, PostalCodes, USPostNet, USPlanet, UKPostal,
AustralianPostal, JapanPostal, DutchPostal, etc.
Camera module Front 500W camera and rear 1300W camera, with ashlight
and automatic focusing functions
User interface
LCD screen:
• Bright white backlight can adjust brightness of backlight
manually
• 720×1440 resolution, 5.5-cun IPS HD screen
Touch screen: Capacitive touch screen
Speaker and indicator:
●Built-in monaural speaker
●Charge indicator (red light)
●Network indicator
Table des matières
Autres manuels Invengo Système RFID
