Intracom 525800 Manuel utilisateur
High-Power Ceiling Mount Wireless
300N PoE Access Point
User manual
300M High Power Wireless Ceiling AP
Version 1.0 | 7/15/2015
Table of Content
Chapter 1 Product Introduction ............................................................................1
1.1 Product Features...........................................................................................1
1.2 Package Contents.........................................................................................1
1.3 Hardware Description ...................................................................................2
Chapter 2 Hardware Installation Wizard.............................................................3
Chapter 3 Configuration Management................................................................4
3.1 Set Network Configuration...........................................................................4
3.2 Login Device Management Interface..........................................................6
Chapter 4 Function Deployment...........................................................................7
4.1 Status...............................................................................................................7
4.1.1 Overview................................................................................................................7
4.1.2 Firewall...................................................................................................................8
4.1.3 Routes....................................................................................................................8
4.1.4 System Log............................................................................................................8
4.1.5 Kernel Log.............................................................................................................9
4.1.6 Processes..............................................................................................................9
4.1.7 Realtime Graphs.................................................................................................10
4.1.7.1 Load ..........................................................................................................10
4.1.7.2 Traffic.........................................................................................................10
4.1.7.3 Wireless....................................................................................................11
4.1.7.4 Connections.............................................................................................11
4.2 System...........................................................................................................12
4.2.1 System.................................................................................................................12
4.2.2 Administration......................................................................................................13
4.2.3 Software...............................................................................................................15
4.2.4 Startup..................................................................................................................16
4.2.5 Scheduled Tasks.................................................................................................17
4.2.6 LED Configuration..............................................................................................18
4.2.7 Backup/Flash Firmware.....................................................................................18
4.2.8 Reboot..................................................................................................................20
4.3 Service...........................................................................................................20
4.3.1 Dynamic DNS......................................................................................................20
4.3.2 UPNP....................................................................................................................22
4.4 Network.........................................................................................................24
4.4.1 Interfaces.............................................................................................................24
300M High Power Wireless Ceiling AP
4.4.1.1 LAN............................................................................................................24
4.4.1.2 WAN..........................................................................................................26
4.4.2 Wifi........................................................................................................................30
4.4.2.1 Radio0: Master "OpenWrt".....................................................................32
4.4.3 DHCP and DNS..................................................................................................34
4.4.4 Hostnames ..........................................................................................................38
4.4.5 Static Routes.......................................................................................................38
4.4.6 Diagnostics..........................................................................................................39
4.4.7 Firewall.................................................................................................................40
4.4.7.1 General Settings......................................................................................40
4.4.7.2 Port Forwards ..........................................................................................43
4.4.7.3 Traffic Rules.............................................................................................45
4.4.7.4 Custom Rules..........................................................................................46
4.4.8 QoS.......................................................................................................................47
4.5 Logout............................................................................................................48
4.6FCCStatement..............................................49
300M High Power Wireless Ceiling AP
1
Chapter 1 Product Introduction
The 300M High Power Wireless Ceiling AP is based on 802.11n standard, using MIMO,
OFDM technology, provides a wireless data transmission rate up to 300Mbps; using high
power PA design of wireless power up to 400mW, long distance transmission and provide
greater coverage simultaneously has signal strong penetration force; by ceiling type
installation design that is very suitable enterprises, hotels, airports, schools and other
indoor or public places, to realize high-speed network coverage. At the same time the
product support Ethernet PoE power and external power adapter, support the
IEEE802.3af standard power supply, so that the AP can also be installed in places without
power supply, reduces the installation cost, also make the installation and use more
simple and convenient, flexible network layout and installation, improve the network layout.
This AP also provides very convenient comprehensive network management functions,
support a variety of wireless data encryption, can guarantee the security of data in the
wireless network transmission, support for IP, for AP SSID, encryption, upgrade, reset and
restart management function.
1.1 Product Features
z1-Port 10/100Mbps RJ45 Ethernet interface, Supports standard 802.3af PoE by
electricity.
zBe consistent with 802.11b/g/n wireless protocol, providing up to 300Mbps wireless
rate.
zWireless high power up to 400mW meet the remote transmission and large area
coverage.
zSupport AP, WDS mode, can easily realize the wireless AP, wireless repeater, a
wireless point-to-point, point to multipoint wireless bridge bridge.
zSupport 64/128 bit WEP encryption, wpa/wpa2, wpa-psk/wpa2-psk encryption and
security mechanism.
zSupport Web interface management, which can be configured and management of
the rich AP.
zUsing ceiling type installation design, indoor decoration. With small size, simple
installation and stability.
1.2 Package Contents
zCeiling AP
zSet of installation accessories
zUser Manual
zWarranty Card
300M High Power Wireless Ceiling AP
2
1.3 Hardware Description
Ethernet Port: Ethernet port jack (RJ45). For wired Ethernet connection, and PoE
-powered devices to be powered by the port to the AP.
Power Interface: When the Ethernet does not support the PoE power supply, the port can
be connected to DC12V/1A power supply adapter.
Reset Button: If you need to restore the AP to the factory default settings, please use
sharp object to hold the reset button for about 6 seconds after release, AP will
automatically restore factory settings and restart.
300M High Power Wireless Ceiling AP
3
Chapter 2 Hardware Installation Wizard
1. The AP chassis are placed on the wall or the ceiling, with mark pen mark hole fixed
position, and then drilling.
2. AP chassis with screws is fixed on the wall or the ceiling.
3. Will support the PoE Ethernet cable to the AP has been configured Ethernet ports
(optional up or down), if you do not support PoE power supply, DC 12V/1Apower supply is
connected.
4. TheAP linked to the fixed good chassis.
Note: The default SSID for the AP: OpenWrt
The default wireless password: 12345678
300M High Power Wireless Ceiling AP
4
Chapter 3 Configuration Management
3.1 Set Network Configuration
1. On your computer desktop, right click "My Network Places" and select "Properties".
2. Right click "local Area Network Connection" and select "Properties".
3. Select "Internet Protocol(TCP/IP)" and click "Properties".
300M High Power Wireless Ceiling AP
5
4. Select "Use the following IP address(s)" and "Use the following DNS server
address". Click "OK".
IP address: 192.168.10.XXX: ( XXX is a number from 1~253)
Subnet mask: 255.255.255.0
Defaultgateway:192.168.10.254
PreferredDNSserver:192.168.10.254
Click"OK" to save the setting.
300M High Power Wireless Ceiling AP
6
Note: IP address set here is only for entering the AP management page to set specific IP
address setting, please refer to the actual use of the environment.
3.2 Login Device Management Interface
1. Connect to the AP through a wireless network or wired network.
2. Open IE browser, in the address bar enter http://192.168.10.254, press the Enter key to
enter the login screen.
3. The default user name is root, the password is blank, click on the "Login", the login
page as shown below.
4. After the above steps to successfully log AP management interface page. Click Home
at the top of the main menu bar to configure the corresponding function.
300M High Power Wireless Ceiling AP
7
Chapter 4 Function Deployment
4.1 Status
Click on "Status", you can see the Overview, Firewall, Routes, System Log, Kernel Log,
Processes, Realtime Graphs options.
4.1.1 Overview
Click on the "Status>Overview" option, you can see the following interface.
Through this interface, you can learn "System" information(AP Name, AP Model,
Firmware Version, Kernel Version, Local Time, Uptime, Load Average), "Memory"
information(Total Available, Free, Cached, Buffered), "Network" information(IPv4 WAN
Status), "DHCP Leases" information, "Wireless" information, "Associated Stations"
information, "Active UPnP Redirects" information.
Table des matières
Manuels Point d'accès sans fil populaires d'autres marques
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur
Ubiquiti
Ubiquiti NanoStation NSM2 Manuel utilisateur
Cisco
Cisco Aironet 1550 Series Manuel utilisateur
Aruba
Aruba IAP-335 Manuel utilisateur
Advantek Networks
Advantek Networks AWN-AP-54MR Manuel utilisateur
IP-COM
IP-COM AP355 Manuel utilisateur
