5www.intertest.com Operating Manual
Precaution
Operation is subject to the following
conditions;
•This device may not cause harmful interference.
•This device must accept any interference
received, including interference that may cause
undesired operation.
•A regulated DC 12V 500mA power supply is
recommended for use with this camera for the
best image and the most stable operation.
An unregulated power supply can cause
damage to the camera. When unregulated
power supply is applied, product warranty will
be out of subject.
•If it is used for CVBS application. It is
recommended that the camera is used with a
monitor that has a CCTV quality 75 Ohm video
impedance level. If your monitor is switched to
high impedance then please adjust accordingly.
•Do not attempt to disassemble the camera to
gain access to the internal components. Refer
servicing to tour dealer.
•Never face the camera towards the sun or any
bright or reflective light, which may cause
smear on the image and possible damage to the
CMOS.
•Do not remove the serial sticker for the warranty
service.
•Do not drop the thing or give a strong impact to
the product.
•Avoid the place where is so dusty, humid or
soot-covered. It may cause electric shock or fire.
•Do not expose to an intense light source such as
direct sunlight or spotlight. It may damage the
CMOS.
•If the camera operates more than 24 hours, It is
recommended that you execute the lens initial
action or reset the camera.
•Since the color representation differs depending
on the DVR, you have to select the type of DVR
to use in the menu.
•When outputting video with CVBS, DVR
selection must be set to CVBS. When outputting
images using AHD / TVI DVR, you must select
the appropriate DVR.
RECUTION
Information may be changed without notice
This document provides technical information for the user. KT&C reserves the right to modify the information in this
document as necessary. The customer should make sure that they have the most recent manual version.
5
Operation is subject to the following
conditions;
•This device may not cause harmful interference.
•This device must accept any interference
received, including interference that may cause
undesired operation.
•A regulated DC 12V 500mA power supply is
recommended for use with this camera for the
best image and the most stable operation.
An unregulated power supply can cause
damage to the camera. When unregulated
power supply is applied, product warranty will
be out of subject.
•If it is used for CVBS application. It is
recommended that the camera is used with a
monitor that has a CCTV quality 75 Ohm video
impedance level. If your monitor is switched to
high impedance then please adjust accordingly.
•Do not attempt to disassemble the camera to
gain access to the internal components. Refer
servicing to tour dealer.
•Never face the camera towards the sun or any
bright or reflective light, which may cause
smear on the image and possible damage to the
CMOS.
•Do not remove the serial sticker for the warranty
service.
•Do not drop the thing or give a strong impact to
the product.
•Avoid the place where is so dusty, humid or
soot-covered. It may cause electric shock or fire.
•Do not expose to an intense light source such as
direct sunlight or spotlight. It may damage the
CMOS.
•If the camera operates more than 24 hours, It is
recommended that you execute the lens initial
action or reset the camera.
•Since the color representation differs depending
on the DVR, you have to select the type of DVR
to use in the menu.
•When outputting video with CVBS, DVR
selection must be set to CVBS. When outputting
images using AHD / TVI DVR, you must select
the appropriate DVR.
Information may be changed without notice
This document provides technical information for the user. KT&C reserves the right to modify the information in this
document as necessary. The customer should make sure that they have the most recent manual version.
