Introduction and safety
Safety notice
The Interspiro Respire face mask has been tested in accordance with EN 136
class 3. EU type examination (Regulation EU 2016/425) by DEKRA EXAM
GmbH, Dinnendahlstr. 9, 44809 Bochum, Germany.
The product must only be used with an approved filter.
If the face mask and/or the self contained breathing apparatus is to be used in
conjunction with other personal protective equipment it is important to ensure
that the additional personal protective equipment is compatible with the face
mask and does not impair the full protection of the respiratory protective
device.
Examples of dangers which may require the use of additional personal
protective equipment:
• Liquids, steam or gases which can damage the skin
• Pollutants absorptive by skin
• Thermal radiation
• Mechanical effects
• Explosive environments
The product must only be used by personnel in good health and trained in the
use of respiratory protective equipment. Individuals with beards or large
sideburns may not obtain an adequate seal. The face mask must be
maintained, serviced and tested as described in this user manual, Interspiro
service manuals and Interspiro test instructions.
INTERSPIRO IS NOT RESPONSIBLE FOR:
combinations of products, unless put to market by Interspiro
changes or adaptations made to the product by a third party
Changes to this document – necessitated by typographical errors, inaccuracies
of current information or improvements and changes of equipment – may be
Respire N filter mask
5
ENGLISH
