Interlink electronics VP4750 Manuel du propriétaire
1
P4750 BLUETOOTH TOUCHPAD REMOTE – ADVANCED FEATURES SETUP
The VP4750 has several advanced features that can be turned on or off from the Advanced Setup Mode. To
access any of the features listed below, rst enter Advanced Setup Mode and then press and hold the specied
button(s) for that feature. The remote will then automatically exit Advanced Setup Mode.
To enter Advanced Setup Mode:
1. Turn OFF the remote.
2. Simultaneously, press and hold all three of these buttons:
Left Mouse button (i.e. click-trigger)▪
Right Arrow button▪
Blank Screen button▪
3. While holding these three buttons, slide the Power Switch to ON and release it.
4. The green LED will blink rapidly while in Advanced Setup Mode.
ADVANCED FEATURES
Touchpad Tapping:
This feature enables tapping on the Touchpad to generate Left Mouse button clicks. This feature is set to
Disabled in the factory default settings.
To Enable this feature:
1. Enter Advanced Setup Mode (see above)
2. Press and hold the following button for > 2 seconds:
Right Mouse button▪
To Disable this feature (i.e. to revert to factory default):
1. Enter Advanced Setup Mode (see above)
2. Press and hold the following button for > 2 seconds:
Blank Screen button▪
Scrolling:
This feature enables sliding your nger on the Scroll Strip to cause vertical scrolling in a document or web
page. This feature is set to Enabled in the factory default settings.
To Enable this feature (i.e. to revert to factory default):
1. Enter Advanced Setup Mode (see above)
2. Press and hold the following button for > 2 seconds:
Right Arrow button▪
2
To Disable this feature:
1. Enter Advanced Setup Mode (see above)
2. Press and hold the following button for > 2 seconds:
Left Arrow button▪
Changing Blank Screen button to send “.” Key code:
In the default mode (i.e. factory setting), the Blank Screen button transmits the code for the “b” key. In most
versions of PowerPoint, the “b” key causes the screen to blank during a presentation. In some versions of
PowerPoint (notably European), this function is invoked instead by the “.” key.
To change Blank Screen button to send the “.” key code instead:
1. Enter Advanced Setup Mode (see above)
2. Simultaneously, press and hold the following two buttons for > 2 seconds:
Blank Screen button▪
Left Arrow button▪
To change Blank Screen button to send the “b” key code (i.e. revert to factory default):
1. Enter Advanced Setup Mode (see above)
2. Simultaneously, press and hold the following two buttons for > 2 seconds:
Blank Screen button▪
Right Arrow Button▪
Swapping the key codes of the Left Arrow and Right Arrow buttons:
In the default mode (i.e. factory setting), the Right Arrow button sends the Next Slide code and the Left Arrow
button sends the Prev. Slide code. In some instances, it may be desirable to swap the meanings of the Left
Arrow and Right Arrow buttons, i.e. to have the Left Arrow button send the Next Slide key code and the Right
Arrow button send the Prev. Slide key code.
To Enable this feature (i.e. to swap the key codes):
1. Enter Advanced Setup Mode (see above)
2. Simultaneously, press and hold the following two buttons for > 2 seconds:
Left Mouse button (i.e. click-trigger)▪
Right Arrow button▪
To Disable this feature (i.e. to revert to factory default):
1. Enter Advanced Setup Mode (see above)
2. Simultaneously, press and hold the following two buttons for > 2 seconds:
Left Mouse button (i.e. click-trigger)▪
Left Arrow button▪
3
Swapping the key codes of the Left Mouse button (i.e. click-trigger) and the Right Mouse button:
In the default mode (i.e. factory setting), the click-trigger sends the Left Mouse button code and the Right
Mouse button sends the Right Mouse button code. In some instances, it may be desirable to swap these key
codes.
To Enable this feature (i.e. to swap the key codes):
1. Enter Advanced Setup Mode (see above)
2. Simultaneously, press and hold the following two buttons for > 2 seconds:
Left Mouse button (i.e. click-trigger)▪
Right Mouse button▪
To Disable this feature (i.e. to revert to factory default):
1. Enter Advanced Setup Mode (see above)
2. Simultaneously, press and hold the following two buttons for > 2 seconds:
Left Mouse button (i.e. click-trigger)▪
Blank Screen button▪
To reset all functions to their factory default key codes:
1. Enter Advanced Setup Mode (see above)
2. Simultaneously, press and hold the following two buttons for > 2 seconds:
Left Arrow button▪
Right Arrow button▪
To exit Advanced Setup Mode without making any changes:
1. Press and hold Left Mouse button (i.e. click-trigger) for > 2 seconds, OR
2. Don’t press any button > 10 seconds.
Table des matières
Autres manuels Interlink electronics Télécommande
Interlink electronics
Interlink electronics VP4350 Manuel utilisateur
Interlink electronics
Interlink electronics Jade VP4910 Manuel utilisateur
Interlink electronics
Interlink electronics ExpressCard Media Remote for Bluetooth Manuel utilisateur
Interlink electronics
Interlink electronics RemotePoint Onyx Manuel utilisateur
Interlink electronics
Interlink electronics VP4450 Manuel utilisateur
Interlink electronics
Interlink electronics VP6450 Manuel utilisateur
Manuels Télécommande populaires d'autres marques
Panasonic
Panasonic EUR7622KB0 Manuel utilisateur
Bang & Olufsen
Bang & Olufsen Beo4 Manuel utilisateur
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur
Multiplex
Multiplex PROFI TX 9 Manuel utilisateur
One Remote
One Remote RMB4 Manuel utilisateur
FUTABA
FUTABA 9ZAP - PART2 Manuel utilisateur
