Intergraph TDZ 2000/ExtremeZ Manuel utilisateur

TDZ 2000/ExtremeZ

Late-Breaking News

April 1999

DHA024181

and trademark law. This document may not, in whole or in part, be reproduced in any form or by any means, or be used to make any

derivative work, without written consent from Intergraph Computer Systems.

Use, duplication, or disclosure by the United States Government is subject to restrictions as set forth in subdivision (c)(1)(ii) of the

rights in technical data and computer software clause at DFARS 252.227-7013. Unpublished rights are reserved under the copyright

laws of the United States.

Intergraph Computer Systems, Huntsville AL 35894-0001

Notice

Information in this document is subject to change without notice and should not be considered a commitment by Intergraph Computer

Systems. Intergraph Computer Systems shall not be liable for technical or editorial errors in, or omissions from, this document.

Intergraph Computer Systems shall not be liable for incidental or consequential damages resulting from the furnishing or use of this

document.

All warranties given by Intergraph Computer Systems about equipment or software are set forth in your purchase contract. Nothing

stated in, or implied by, this document or its contents shall be considered or deemed a modification or amendment of such

warrantites.

Trademarks

Intergraph Computer Systems and the Intergraph Computer Systems logo are registered trademarks of Intergraph Computer Systems.

TDZ and TowerMate are trademarks of Intergraph Computer Systems.

Other brands and product names are trademarks of their respective owners.

General

Powering Down the System

If you use the “Power down the computer” option in the Automatic Shutdown Utility, you must

press the Standby button to turn off system power.

Matrox Millennium G200 AGP Graphics

If your system was delivered with an installed Matrox Millennium G200 AGP video display

adapter, you can combine G200 with Matrox Millennium II PCI video display adapters for multi-

screen configurations. If you must reinstall G200 driver software, use the MILL2DRVNT or

MILL2DRVW95 driver software, as appropriate. For more information, see the Matrox document

delivered with the system.

Microsoft IntelliMouse

If a Microsoft IntelliMouse shipped with your system, it will function as a standard two-button

mouse until you install the IntelliPoint software. This software (MSMOUSEDRV) is delivered with

the system in InterSite Version Manager or on a backup diskette. See theREADME.TXT file

delivered with this software for more information.

Operating System Support for USB Peripherals

Your system includes Universal Serial Bus (USB) ports to which you can connect USB

peripherals. Windows NT 4.0 does not currently support USB peripherals. Microsoft will add

support for USB peripherals to a future Windows NT release.

Default Disk Drive Formatting and Partitioning

Your system’s primary system disk drive and any additional disk drives were formatted and

partitioned before shipment. In Explorer or My Computer, you can right-click a disk drive and

click Properties to display the drive’s partition size and file system format. To view partition and

format information for all disk drives, you can use Disk Administrator. See the operating system

documentation and Help for more information on these tools.

System BIOS

Please note the following items related to the system BIOS:

♦The troubleshooting information in the System Setup document contains a list of beep codes

and associated error messages. You can disregard these codes and messages, as they are not

used by the TDZ 2000. If your system powers on but does not display any video, check for

proper installation of the memory modules and the video display adapter.

♦The BIOS Setup options Floppy Access Control and IDE Hard Disk Access Control (used to

write-protect these devices) have no effect under Windows NT. Windows NT does not use

the BIOS for peripheral device access.

♦Immediately after installing a Symbios SCSI adapter card, you must run the Symbios SCSI

Configuration Utility (PCI_CFG.EXE) to disable SCAM on the SCSI adapter card, and to

change the Adapter Boot Order to include the SCSI adapter card. The correct boot order is as

follows:

Boot Order Bus / Device Description

0 0 / 60 Internal SCSI channel

1 0 / 61 External SCSI channel

2 Varies / Varies Symbios SCSI adapter card

The bus and device numbers for the card depend on the slot in which the card is installed.

Your System Setup document may not have information on BIOS power management options.

Select Power Management in the BIOS Setup main menu to display these options.

Option Notes

Power Management/APM Set this option to Enabled to enable the chipset power

management and APM (Advanced Power Management)

features. The settings are Enabled or Disabled. The Fail-Safe

and Optimal settings are Disabled. Do not enable this

parameter unless you fully understand the function of each of

the following parameters.

Green PC Monitor Power State This option specifies the power state that the green PC-

compliant video monitor enters when the BIOS places it in a

power saving state after the specified period of display

inactivity has expired. The settings are Off, Standby, Suspend,

or Disabled. The Optimal and Fail-Safe settings are Standby.

Video Power Down Mode This option specifies the power state that the video subsystem

enters when the BIOS places it in a power saving state after the

specified period of display inactivity has expired. The settings

are Standby, Suspend or Disabled. The Optimal and Fail-Safe

settings are Disabled.

Option Notes

Hard Disk Power Down Mode This option specifies the power conserving state that the hard

disk drive enters after the specified period of hard drive

inactivity has expired. The settings are Disabled, Standby, or

Suspend. The Optimal and Fail-Safe settings are Disabled.

Hard Disk Time Out This option specifies the length of a period of hard disk drive

inactivity. When this length of time expires, the system enters

power-conserving state specified in the Hard Disk Power

Down Mode option. The settings are Disabled, 1 min.

(minute), 2 min, 3 min., 4 min., 5 min., 6 min, 7 min., 8 min., 9

min., 10 min., 11 min., 12 min., 13 min., 14 min, and 15 min.

The Optimal and Fail-Safe settings are Disabled.

Standby Time Out This option specifies the length of a period of system inactivity

while in the Full On power state. When this length of time

expires, the system enters the Standby power state. The

settings are Disabled, 4 msec, 8 msec, 12 msec, 16 msec, up to

508 msec, in increments of 4 msec. The Optimal and Fail-Safe

settings are Disabled.

Suspend Time Out This option specifies the length of a period of system inactivity

while in the Standby power state. When this length of time

expires, the system enters the Suspend power state. The

settings are Disabled, 4 msec, 8 msec, 12 msec, 16 msec, up to

508 msec, in increments of 4 msec. The Optimal and Fail-Safe

settings are Disabled.

Chassis Fans

The System Reference may contain incorrect information on Chassis Fan 1 and Chassis Fan 2.

Please note the correct information:

Chassis Fan Location System Board Connector

Chassis Fan 1 Bottom front J54

Chassis Fan 2 Top rear J5

Disk Drive Delayed Start

Hard disk drives draw an extra amount of power when the system is first powered on. The power

supply can support up to two hard disk drives powering on (spinning up) at once. If you use more

than two hard disk drives in a system, you must activate the delayed start feature on the additional

hard disk drives. Doing this forces these drives to pause before spinning up, allowing the power

supply to finish starting the first drives. See the disk drive documentation or the disk drive label

for information on activating delayed start.

Windows NT 4.0

Ethernet Network Setup and Configuration

On a system equipped with an Ethernet network adapter, note the following:

♦Network adapter driver software is preinstalled. Operating system Setup no longer prompts

you to install networking.

♦Core network software and the NetBEUI network protocol are preinstalled. If you want to

connect the system to another type of network (such as TCP/IP), you must add the appropriate

network protocol using the Network applet in the Control Panel. Reinstall the appropriate

Windows NT 4.0 Service Pack software after making such changes, as recommended by

Microsoft.

Enabling PC Card Hard Disk Operation

Intergraph Computer Systems has found a resource conflict that keeps a PC Card hard disk (ATA

or AT type) from being configured by Windows NT. To work around this conflict and enable

operation of a PC Card hard disk in a PC Card adapter, you must edit the Windows NT Registry.

WARNING Be careful when making changes in the Registry. Any mistakes or incorrect

changes may cause serious operating system problems, and you may have to

reinstall the operating system. If the system becomes unusable after you have

modified the Registry, restart the system and try to use the Last Known Good

configuration option to undo the damage. See Windows NT documentation for

more information on the Last Known Good configuration option.

To enable PC Card hard disk operation:

1. Start the Registry Editor (REGEDT32.EXE) to open the Registry.

2. Open the following subkey in the Registry:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Pcmcia

3. From the Edit menu, select Add Value.

4. In the Value Name box, type InterruptMask.

5. In the Data Type box, select REG_DWORD; then select OK.

6. In the Data box, type F347.

7. Under Radix, select Hex; then select OK.

8. Exit from the Registry Editor.

9. Restart the system.

Installing the Adaptec SCSI Controller Driver

If you reinstall Windows NT 4.0 on a system with an optional Adaptec SCSI controller, be sure to

reinstall the driver for the SCSI controller (2940SCSIDRV) from backup diskette during Setup.

To install the 2940SCSIDRV driver during Setup:

1. When prompted, press Sto bypass detection of mass storage devices.

2. When prompted, press Sto specify a mass storage device other than those listed.

3. When prompted, select Other from the list of devices presented.

4. Follow the prompts to install the driver from the 2940SCSIDRV backup diskette. When

presented with a list of Adaptec SCSI controllers, select the entry for Windows NT 4.0.

Windows 95

CAUTION Intergraph Computer Systems does not fully certify Windows 95 on the TDZ 2000,

and does not ship Windows 95 installed on the TDZ 2000. The following basic

information is provided as a courtesy for customers who attempt to install Windows

95 on a TDZ 2000. Intergraph Computer Systems provides no further support for

such installations, and customers assume full responsibility for supporting such

installations.

Installing Windows 95

During installation of Windows 95, after all files have been copied from the Windows 95 CD-

ROM, the system restarts. After this, Setup may prompt you to load various device drivers. If this

happens, cancel the loading of these drivers

After completing Setup, install these system software products in the order given:

♦W95SR2.1, a supplement of Windows 95 Service Release 2.1 that includes support for

Universal Serial Bus (USB).

♦PIIX4W95, a software patch that enables Windows 95 to recognize the PIIX4 controller on the

TDZ 2000 system board. You must install PIIX4W95 to enable Windows 95 to detect the

system’s primary and secondary IDE controllers, and to use the system’s CD-ROM drive.

NOTE If you do not have backup diskettes containing these products, you can get them

from the Support pages on the World Wide Web(http://www.intergraph.com/ics) or

from the Intergraph Bulletin Board Service (1-205-730-8786).

After installing PIIX4W95, the system restarts several times. During these restarts, Windows 95

detects various hardware devices in the system. If you are prompted to load any device drivers,

load only the PCI Standard Host CPU Bridge and the Intel 82371AB PCI Bus Master IDE

Controller. Cancel the loading of any other drivers. These other drivers require files that are on

the Windows 95 CD-ROM, which cannot be accessed at this time.

Once Windows 95 has detected the system’s primary and secondary IDE controllers, you should

no longer cancel the loading of any other drivers, and let Windows 95 search the CD-ROM for any

needed files.

Using the CD-ROM Drive in MS-DOS Mode

Intergraph Computer Systems has discovered a problem you may encounter if you try to install

Windows 95 on a TDZ 2000. If the system has a Panasonic CD-ROM drive, you cannot use the

CD-ROM drive by default when the system is in MS-DOS mode. This occurs because of the way

Windows 95 handles real-mode and protected-mode drivers as it starts.

This problem does not occur in a TDZ 2000 that has a Sony CDU611 CD-ROM drive. To identify

the installed CD-ROM drive, go to Start/Settings/Control Panel/System/Device Manager/

CD-ROM. Device Manager identifies the Panasonic CD-ROM drive as a Matshita CR-585

CD-ROM drive.

To enable MS-DOS mode access to the Panasonic CD-ROM drive:

1. Edit the system’s CONFIG.SYS file, adding these two lines at the beginning of the file:

DEVICE=C:\ATAPIMGR.SYS

DEVICE=C:\SR_ASPI.SYS /D:CDIDE001 /Q

2. Edit the system’s AUTOEXEC.BAT file, adding this line at the beginning of the file:

MSCDEX.EXE /D:CDIDE001 /M:10

3. Copy the following files from the BOOTSYM95 diskette (delivered with the system) to the root

directory of the system drive (usually C:\ ):

ATAPIMGR.SYS

SR_ASPI.SYS

4. Restart the system to make the changes take effect.

Be sure to remove or comment out these changes if you no longer want to run the system in

MS-DOS mode.

Using a PC Card Adapter

Intergraph Computer Systems has discovered a problem you may encounter if you try to install

Windows 95 on a TDZ 2000. If you want to use a PC Card adapter on a system running Windows

95, you must disable the use of Hardware Monitor on the system. To do this, run the BIOS Setup

program, and set the H/W Monitor, Primary I/O Port parameter in the Chipset menu to Disabled.

See the System Setup document for information on running the BIOS Setup program and changing

BIOS settings.

Conflicting Device Messages in Device Manager

On a TDZ 2000 equipped with the Advanced Graphics Port (AGP) version of Millennium II

graphics, you may see messages in Device Manager about conflicting devices. In the Matrox

Millennium II AGP entry, under Resources, error messages related to memory ranges used by the

PCI Standard PCI-to-PCI Bridge may display. This does not affect operation of AGP Millennium

II graphics.

Table des matières

Autres manuels Intergraph Ordinateur de bureau

Intergraph

Intergraph TDZ-400 Deskside Manuel d'utilisation

Intergraph

Intergraph TDZ 2000 GL2 Workstation Guide de l'utilisateur

Intergraph

Intergraph TDZ 2000 GX1 Manuel utilisateur

Intergraph

Intergraph TDZ 2000 GL2 Workstation Manuel utilisateur

Intergraph

Intergraph TDZ 2000 GL1 Manuel utilisateur

Intergraph

Intergraph TD-x20 Setup Manuel utilisateur

Intergraph

Intergraph TD-x20 Setup Guide de l'utilisateur

Intergraph

Intergraph TDZ-300 Manuel d'utilisation

Intergraph

Intergraph TDZ 2000 GL2 Workstation Manuel utilisateur

Intergraph

Intergraph TDZ 2000 GL1 Manuel utilisateur

Intergraph

Intergraph TD-260 Manuel de la liste des pièces

Intergraph

Intergraph TD-300 Manuel d'utilisation

Intergraph

Intergraph TD-2x Manuel utilisateur

Intergraph

Intergraph TD-x10 Setup Guide de l'utilisateur

Intergraph

Intergraph TDZ 2000 Manuel utilisateur

Intergraph

Intergraph Zx1 ViZual Workstation Manuel de la liste des pièces

Intergraph

Intergraph TDZ 2000 GT1 Manuel utilisateur

Intergraph

Intergraph TDZ 2000 GL2 Workstation Manuel utilisateur

Intergraph

Intergraph Zx10 6U Manuel de la liste des pièces

Intergraph

Intergraph TD-300 Manuel d'utilisation

Intergraph

Intergraph Zx10 Ultra-Tower Manuel utilisateur

Intergraph

Intergraph TDZ 2000 GL1 Guide de l'utilisateur

Intergraph

Intergraph ExtremeZ SAN Mode d’emploi

Intergraph

Intergraph TD-325 Targa 2000 Manuel utilisateur

Manuels Ordinateur de bureau populaires d'autres marques

HP m9060n - Pavilion - Elite Fiche technique

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

HP Presario SV7000 - Desktop PC Manuel utilisateur

HP ProDesk 400 G5 Manuel

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur