Interacoustics Sera Manuel utilisateur

D-0118113-C –2019/03 Page 1of 2

Quick Guide

SeraTM Automated ABR

PREPARE THE EQUIPMENT

1. Turn on SeraTM by pressing the home/power button

2. Select a new or existing patient on the device or use the Quick Test option.

3. Select the ABR test protocol from the list.

4. Select the ear for testing

5. Pressing the Test button starts the test.

TEST ENVIRONMENT

The ideal test environment is a quiet room where lights and other electronic equipment are turned off.

PREPARE THE BABY

Patient state

The baby should be sleeping or in a quiet and relaxed state.

Sucking, blinking, crying or movement may affect testing.

Skin preparation

If the baby’s skin is oily or covered in vernix, the electrode placement sites

should be cleaned prior to placing the electrodes.

Use a conductive gel with the electrodes to improve impedances.

Place electrodes

Place surface electrodes using the specified test montage for the selected

protocol (mastoid or nape).

Connect cables

Connect the cables from the preamplifier to the respective surface electrodes.

PLACE TRANSDUCER

Place the probe or insert earphones in the baby’s ear/s or place the EarCups around the baby’s ears.

To reduce the chance of

electrical interference, ensure

that the electrode cables are

placed away from the insert

earphone or EarCup transducer

box.

D-0118113-C –2019/03 Page 2of 2

RUN TEST

Press the Test button

IMPEDANCE CHECK

RESULTS

PASS result

REFER result

INCOMPLETE result

When the pass criteria for the test

is reached, a is displayed in

green above the measurement,

indicating the test has PASSED.

When the pass criteria for the test

is not reached within the

measurement time, is displayed

in amber above the measurement,

indicating the test is a REFER.

If the test is stopped before a

PASS or REFER is generated by

the system, is displayed above

the measurement indicating that

the test is INCOMPLETE.

An impedance check will begin. Impedances are indicated by the green/amber dots on the montage picture

as well as in numerical format on the screen.

When a dot is amber, it means the impedance is poor (> 50kΩ) for the

indicated electrode. Check that the surface electrode and cables are

connected correctly. It may be necessary to re-clean the skin or use a

conductive gel with the surface electrodes to achieve an acceptable

impedance. Testing cannot begin until impedance indictors are green

(< 50kΩ).

Autres manuels pour Sera

Autres manuels Interacoustics Équipement médical

Interacoustics

Interacoustics OtoRead Manuel utilisateur

Interacoustics

Interacoustics VF405 Manuel utilisateur

Interacoustics

Interacoustics VRA201 Manuel utilisateur

Interacoustics

Interacoustics Micromedical Orion Manuel utilisateur

Interacoustics

Interacoustics VisualEyes 505 Manuel utilisateur

Interacoustics

Interacoustics Lyra Manuel utilisateur

Interacoustics

Interacoustics Titan ABRIS Manuel utilisateur

Interacoustics

Interacoustics Virtual SVV Manuel utilisateur

Interacoustics

Interacoustics Air Fx Manuel utilisateur

Interacoustics

Interacoustics EyeSeeCam Manuel utilisateur

Interacoustics

Interacoustics AT235 Manuel utilisateur

Interacoustics

Interacoustics AD528 Manuel utilisateur

Interacoustics

Interacoustics affinity 2.0 Manuel d'installation

Interacoustics

Interacoustics Sera Manuel utilisateur

Interacoustics

Interacoustics VRA Screen Manuel utilisateur

Interacoustics

Interacoustics Eclipse Manuel utilisateur

Interacoustics

Interacoustics EyeSeeCam vHIT Manuel utilisateur

Interacoustics

Interacoustics OtoRead Manuel utilisateur

Interacoustics

Interacoustics Titan Manuel utilisateur

Interacoustics

Interacoustics VRA Screen Manuel utilisateur

Interacoustics

Interacoustics Sera Manuel d'installation

Interacoustics

Interacoustics Orion Manuel utilisateur

Interacoustics

Interacoustics VN415 Manuel utilisateur

Interacoustics

Interacoustics ASSR Manuel utilisateur

Manuels Équipement médical populaires d'autres marques

TekTone

TekTone Tek-CARE160 Manuel utilisateur

NeuroMetrix

NeuroMetrix Quell 2.0 Manuel utilisateur

AMT

AMT XLR8 Manuel utilisateur

Medipost-Nutristoma

Medipost-Nutristoma MD300K2 Manuel utilisateur

EDAN

EDAN SONOTRAX Pro Manuel utilisateur

Restorative Therapies

Restorative Therapies RT300 Manuel utilisateur

Gendex

Gendex Expert DC Manuel utilisateur

Dexcowin

Dexcowin ADX4000W Manuel utilisateur

Libelium

Libelium MySignals Manuel utilisateur

Acelity

Acelity V.A.C.ULTA 4 Manuel utilisateur

Caputron

Caputron ActivaDose II tDCS Manuel utilisateur

FujiFilm

FujiFilm Sonart Manuel du propriétaire

Plinth 2000

Plinth 2000 93CDT Manuel utilisateur

GE SENOGRAPHE 800T Manuel utilisateur

GE Definium 5000 Manuel utilisateur

Kanmed

Kanmed GE-1380 Manuel utilisateur

Huntleigh

Huntleigh FD1 Manuel utilisateur

Stryker

Stryker SPR Plus Manuel utilisateur