Intempo Digital PG-01 Manuel utilisateur

PG-01 instruction manual

DIGITAL RADIO

www.intempodigital.com

fairbank house ashley road altrincham WA14 2DP united kingdom

t: +44 (0)161 924 0300

f: +44 (0)161 924 0319

e: sales@intempodigital.com

PG-01 User Manual

• Intempo Digital radio

• External power supply

• Telescopic aerial

• Warranty card

Accessories

Control panels

Inputs/Outputs

STAND BY USER PRESETS 1-4

VOLUME CONTROL

AERIAL INPUT

HEADPHONE SOCKET

DC POWER SOCKET

SELECT

DAB/FM

AUTO TUNE

DOWN

INFO

SLEEP

ALARMLCD DISPLAY

Aerial, headphone socket 3.5mm, & DC power socket.

Switching your Intempo-digital radio on for the first time

Connect the external power adapter to the radio

and plug the other end into mains outlet.

Extend the telescopic

aerial as far as it will go.

During scan mode the LCD will display a slide

bar that indicates the progress of the scan and

the amount of radio stations that have been

found so far.

PRESENT STATION

SCROLLING TEXT INFORMATION (DLS)

RADIO MODE (DAB OR FM)

DAB - unlike normal radio - Groups together

several radio stations and transmits them on one

frequency. These groups are referred to as

multiplexes and ensembles. Every time one of

these groups has been found the name of that

group will be displayed on the bottom half of the

display e.g. BBC National DAB.

Once the scan has finished the radio will select

the first alphanumerically found station.

If you can’t hear any sound then turn the volume

control clockwise until you reach a desired level.

To explore the stations that have been found you

need to press either the “Up” or “Down” keys.

Every time you press the up or down buttons you

will skip to the next found station. When you find

a station that you would like to listen to then

press the “Select key”. The radio will now switch

to that station and display the station name. If

you don’t press the select key the display will

revert back to the original station after 4 seconds.

Autotune

Full scan

Searching

1Xtra

Searching

DAB

As soon as the power is connected to the radio it

will automatically enter into auto tune mode.

Autoselect Display modes

DLS

Storing stations

Recalling a stored station

Instead of having to press the “Select” key after

you have found a station that you would like to

listen to you can set the radio so that as you

scroll through the stations you listen to each

one in turn. This is great for quickly checking

what’s on each station. To enable this feature

select a station in the normal manner but then

press and hold the “Select” key. The display will

show “Autoselect ON”, the next time you press

either the “Up” or “Down” key it will

automatically select the next station.

To turn the Autoselect off, press either the “Up”

or “Down” key, then quickly follow this by

pressing and holding the “Select” key until the

display shows “Autoselect OFF”.

The information is displayed on the lower

segment of the LCD display.

Dynamic label segment is a scrolling message

that the broadcaster may include with their

transmissions. This message usually includes

information such as programme details etc.

You can store up to 4 of your favourite stations to

the preset keys, this will enable you to get access

your favourite station at the touch of one button.

To store a preset you must first be listening to the

station that you would like to save, then press and

hold one of the presets labelled 1-4 for 2 seconds.

The LCD will then show “Preset # stored”.

Once you have saved a station to one of the

presets you can recall it by pressing and

releasing the corresponding preset key e.g. if you

saved Radio1 to Preset 2 then just press the

number 2 preset key. If you press a preset that

hasn’t been allocated a station then it will display

“preset # empty”.

Programme type

This describes the “style” of music that is being

broadcast e.g. “Rock” or “Classical”.

PRESET KEYS

1,2,3,& 4.

INFO KEY

Every time you press the “Info” key the display

will cycle through the following display modes:-

DLS (scrolling text)

Programme Type

Ensem le (group name)

Time and Date

Signal Strength

Ensemble/Multiplex (Group name) Advanced display modes

Auto tune modes

Secondary services

Signal strength

Time & date

A multiplex/ensemble is a collection of radio

stations that are bundled and transmitted on one

frequency. There are national and local

multiplexes, local ones contain stations that are

specific to that area e.g. MXR West Midlands.

To enter the advanced display mode you need to

press and hold the “Info” key for approximately

3 seconds then release it.

Software version

The first thing you will see is the software version

number. You may be asked which version you

have if you encounter any problems.

Audio mode

If you press the “Info” key again you will now

see the audio mode, this displays what type of

broadcast you are receiving e.g. mono or stereo

and what bit rate is being used.

By pressing the “Info” key again you will exit

from the advanced display mode and revert back

to DLS (scrolling text information).

There are two types of auto tune, one is quick

scan and the other is full scan. Quick scan

searches the UK DAB band III and full scan

searches all band III DAB channels.

To activate the quick scan press the “Auto tune”

key and for full scan press and hold the “Auto

tune” key.

On some occasions you will see a “>” symbol

directly after the name of the station, this

indicates that there are secondary services

available to that station. These secondary

services contain extra services that relate to the

primary station. E.g. a sports station may want to

add extra commentaries. The secondary services

are inserted directly after the primary station.

The slide bar indicates how strong the received

signals are, the stronger the signal the longer the

bar will be from left to right.

If the signal level drops below the fifth box

(minimum signal level) then you may experience

problems with the quality of the audio.

The broadcaster (radio station) provides clock

and date information automatically so there’s no

need to mess around manually setting the clock.

In the unlikely event that the broadcaster doesn’t

transmit any clock information then the display

will show <Time/date>.

Radio 1 DAB

Radio 1

09.05

DAB

21-07-2003

MINIMUM SIGNAL LEVEL

CLOCK DATE

Manual tuning FM Mode

Switching from DAB to FM

Autotune

As well as an auto tune function you can

manually tune the receiver, this can help you

when aligning your aerial or when adding

stations that were missed while auto tuning.

Press and hold the “Select” key for approximately

2 seconds, the LCD display will now show

“Manual tuning”. Now use the “Up” & “Down”

keys to move through the DAB channels which

are numbered from 5A to 13F.

Presets

When you have tuned to a station that you would

like to store as a preset then just press and hold

one of the preset keys (1-4) for 2 seconds. The

display will then show “Preset # stored”.

In order to recall one of your saved presets just

press and release the corresponding preset key.

If no station has allocated to a preset key then it

will display “Preset # empty”.

When the receiver locates an

ensemble/multiplex on one of the DAB channels

it will display this on the bottom line of the LCD.

Now press the “Select” key to enter the current

ensemble/multiplex, the top line will now display

the first station in the ensemble/multiplex.

To see what stations are present on the found

ensemble/multiplex just press either the “Up” or

“Down” key. When you’ve located a station that

you would like to listen to just press the “Select”

key.

Once you have reached the last station in the

found ensemble it will revert back to the first

station again. If you wish to exit the manual

tuning mode press the “Select” key.

DAB CHANNELS

5A 5B 13F

Switching to FM

97.40MHz FM

In order to switch the radio from DAB to FM mode

you need to press the “DAB/FM” key once. The

display will show “Switching to FM”, the radio will

then automatically tune to the nearest station.

On the top line of the display is the current

station name or frequency if the RDS (radio data

system) isn’t available.

To search for a FM station you need to press

and then release the “Autotune” key, this will

start scanning up the frequency band. To scan

down the frequency band press and hold the

“Autotune” key for around 1 second. Once a

station has been found the scanning will stop

automatically. If no station is found then the

tuning will stop once it’s cycled through the entire

FM band (87.5-108MHz).

Frequency

Audio Mode

Display modes Time and date

The broadcaster provides clock and date

information automatically so there’s no need to

mess around manually setting the clock. In the

unlikely event that the broadcaster doesn’t

transmit any clock information then the display

will show <Time/date>.

Frequency

This shows what the frequency is of the present

station e.g. 89.30MHZ.

Advanced display modes

To enter the advanced display mode you need to

press and hold the “Info” key for approximately

3 seconds then release it.

Software version

The first thing you will see is the software

version number.

PI (programme identification) code

If you press the “Info” key again you will now

see the PI code, this is just a code that is

associated with the transmitted station.

*Audio mode

When in FM mode the display will show if the

station being received is in mono or stereo.

* The receiver will automatically switch

between stereo and mono mode. You can

however override this function so that you

can manually switch between stereo and

mono mode, which is helpful if you’re

listening to a poor FM signal. To switch

between mono and stereo press and release

the “Select” key, you will see on the display

“auto” or “mono”. To toggle between each

mode just press and release the “Select” key.

Radiotext

As with DAB, the broadcaster can include

scrolling text that displays information about the

present programme. If there isn’t any Radiotext

information available then the display will show

<Radiotext>.

Programme type

This describes the “style” of music that is being

broadcast e.g. “Rock” or “Classical”.

Signal strength

The slide bar indicates how strong the signal is,

the stronger the signal the longer the bar will be.

Radiotext

Programme Type

Signal Strength

Time and Date

Every time you press the “Info” key the display

will cycle through the following display modes:-

Setting the alarm

Snooze function

*Please note that if the alarm is set to radio

and the wanted DAB station is not available

then the alarm will automatically default to

the beep mode.

When you have finally set the alarm time

and selected either BEEP or RADIO make

sure that the volume is at a sufficient level

for you to hear. To set the alarm press the

“Standby” key to put the radio into standby.

Next to the time you will see a “*” symbol,

this indicates that the alarm is now set. To

turn the alarm off, press the “Alarm” key

then press and release the “Select” key until

you see alarm status off. To exit either press

the “Alarm” key or don’t press any key for

about four seconds.

Silencing the alarm

After the alarm has triggered either in radio or

beep mode it will continue until you press the

“Standby” key. To switch the radio back on just

press the “Standby” key.

When the alarm has triggered press the “Sleep”

key if you wish to postpone the alarm for a

further 7 minutes.

After each key press you will see that the time

only steps up/down by one minute. To speed up

the clock setting just press and hold the “Up” or

“Down” keys. Once you have finished setting the

alarm time press the “Select key”. The display

will change to “Alarm status ON”. To exit, either

press the “Alarm” key or don’t press any key for

about 4 seconds and the display will return to

standard radio operation.

Alarm Type

BEEP

Alarm Time Set

00:01

Alarm Status

off

Alarm Status

on 00:00

Alarm Time Set

00:00

The radio can be used as a standard “radio alarm

clock”. You can either set the alarm in standby or

in power on mode. To set the alarm press and

release the “Alarm” key. The display will show

one of the states shown below. Every time you

press and release the “Select” key it will move

onto the next step in the cycle.

To set the alarm time press the “Alarm” key, then

press and release the “Select” key until you see

“Alarm Time Set”. You should now see the

present alarm time. To alter the time press and

release the “Up” or “Down” key.

DOWN

SELECT KEY

ALARM KEY

Alarm type

You can either set the alarm to activate the radio

or to produce a continuous beeping sound. To

change the alarm type press and release the

“Alarm” key, followed by pressing and releasing

the “Up” or “Down” key. If you push and release

the “Select” key you can now toggle between

“Radio” and “Beep” mode. Pick the one that

you would like to use and then don’t press any

key for approximately 4 seconds That mode is

now set.

Sleep Mode

Sleep Menu Cycle

Factory Reset

Now press the “Select” key until the “Sleep

Timer Set” is displayed. To alter the sleep time

press the “Up” or “Down” keys. When you have

finished setting the sleep time press the “Select

key”. The display will change to “Sleep status

ON”. To exit either press the “Sleep key” or

don’t press any key for about 4 seconds and the

display will return to standard radio operation.

The sleep time is now set.

Once the sleep time has expired the radio will go

into standby. To switch the radio back on press

the “Standby” key.

If you have set the sleep time but you wish to

cancel it press the “Sleep” key. You will see on

the display “Sleep Timer On.” If you now press

the “Select” key once it will display “Sleep

Status OFF.” Press either the “Sleep” key or

don’t press any key for about 4 seconds and the

display will return to standard radio operation.

Welcome

Intempo Digital

System reset

Sleep Status

off

Sleep Timer

on 30 min

Sleep Timer Set

30 min

PRESS AND

HOLD THE

SELECT KEY

This function allows you to programme the radio

to switch itself off after a set period of time. To

activate the sleep function press the “Sleep” key.

The display will show one of the states shown

below. Every time you press the “Select” key it

will move onto the next step in the cycle.

There may be times when you need to reset

your receiver back to its original factory settings

i.e. when you move the radio to another part of

the country so that you can pick up the local &

national DAB stations in that area. If you don’t do

this then when you select a station on the radio it

may no longer be available.

Reset procedure

Unplug the power lead from the rear of the radio,

then reconnect it. Once you see the “Welcome

Intempo Digital” logo press and hold the

“Select” key. When you see "System reset”

then release the “Select key”.

Please note that once the reset has taken place

you will lose all of your stored presets both DAB

& FM, and the internal DAB registry.

Table des matières

Manuels Radio populaires d'autres marques

EisSound

EisSound KBSound iSelect Manuel utilisateur

Midland

Midland 1001LWX Manuel utilisateur

Konig

Konig HAV-SR41 Manuel utilisateur

Roberts

Roberts exprssion Manuel utilisateur

VDigi

VDigi DD3.0 Manuel utilisateur

Radio Shack

Radio Shack 21-1863 Manuel utilisateur

Roberts

Roberts Stream 207 Manuel utilisateur

Sony

Sony Walkman SRF-M97 Manuel utilisateur

Stanley

Stanley FatMax FMC770 Manuel utilisateur

auna

auna DAB-Radio 10026947 Manuel utilisateur

SOUNDMASTER

SOUNDMASTER UR190 Manuel utilisateur

HYT

HYT TC-320 Manuel utilisateur

auna multimedia

auna multimedia Yellowstone 10026851 Manuel utilisateur

B-Tech

B-Tech GMRS-V2 Manuel utilisateur

Weierwei

Weierwei VEV-V8 Manuel utilisateur

SOUNDMASTER

SOUNDMASTER DAB750 Manuel utilisateur

Telefunken

Telefunken TF-1505 Manuel utilisateur

Makita

Makita LXRM03 Manuel utilisateur