Intellinet 521529 Manuel utilisateur

CONTENTS

1. PRODUCT GENERAL INFORMATION..……………………………………………..….2

1.1. Product Description…………………………………………………………………………………….2

1.2. Special Features Highlights……………………………………………………………………………….2

1.3. Product Feature…………………………………………...……………………………………………2

1.4. Product Application………………………………………………………….……………………………..2

2. PRODUCT GENERAL………………………………………………………………….….3

2.1. General Specifications………………………….………………..…………………………..… 3

2.2. LED Indicator………………………………………………………..…………..….………………3

2.3. Interface………………………………………………………….…….………………………..…..3

3. PRODUCT HARDWARE SPECIFICATION……………………….………………….….3

3.1. RF Specification…………………………………………………….………….….…………………..….3

3.2. Hardware Specification………………………………………………………….………………….4

4. PRODUCT SOFTWARE SPECIFICATION………………………………….……...……4

4.1. General Function…………….……………………………...……………..……………………..…..4

4.2. Configuration Function…………..…………………………….………..………………………..….5

5. REGULATION COMPLIANCE…………………………………………………………….5

6. ENVIRONMENTAL REQUIREMENT.…………………………………………..……..5

6.1. Drop and Vibration Test………….……………………….……………………………...……….5

6.2. Operation Environment….……………………………………………………………...……….…6

7. INSTALLATION AND CONFIGURATION……………………..………………..…….6

7.1. Access Point Utility Installation and Configuration………….……………………………...………6

7.2. Access Point Web Configuration…………………………………………………………...………10

WIRELESS ACCESS POINT

1. Product General Information

1.1. Product Description

The Access Point is fully compatible with the IEEE 802.11b wireless standard and based on the Direct

Sequence Spread Spectrum Technology, additional with the Modulation Method Packet Binary

Convolutional Code (PBCC) to provide a data rate up to 22Mbps. It supports IEEE 802.3 10BaseT and 100

BaseTX port for easy interfacing to Ethernet backbone. Web page based configuration utility combined with

excellent level of security to provide robustness and roaming features required for personal, SOHO and

enterprise solution. It is a key component for building up a wireless network that connects the wired

networks.

1.2 Special Features Highlights:

 High-Speed wireless connection up to 22 Mbps

 WEP Encryption function ,up to 256 Bits

 Power Saving operation mode

 DHCP Server (Option)

 DHCP Client

 3 operating mode available: Access Point, AP Client and Bridge (Point-to-Point,

Point-to-Multi-point)

1.3 Product Feature

●IEEE 802.11b Direct Sequence high data rate compatible

●Extra modulation type, Packet Binary Convolutional Code (PBCC)

●High-Speed wireless connection, up to 22Mbps format

●Advanced Power Management supports power saving mode for workstations

●Auto fallback data rate in the environment of interference

●WEP Encryption function (64/128/256 Bits hardware supported)

●External two fixed dipole antennas for diversity function

●Plug-and-Play installation

1.4 Product Application

●Home networking for device sharing, Wireless Multimedia

●Wireless office for extension Ethernet range

●Wireless building to building data communication

●Build system in Infrastructure mode

●Suitable in application for

- difficult-to-wired environments

- temporary LANs for special projects or peak time like in trade exhibition, meeting...etc.

- frequently changing environments

- SOHO (Small Office and Home Office)

- remote access to corporate network infrastructure

2. PRODUCT GENERAL

2.1. General Specifications

Standards: IEEE802.11b Compliant

Data Rate: 1/2/5.5/11/22 Mbps

Security: Wired Equivalent Privacy (WEP) 64/128/256 Bits

Dimension 140 x 90 x 40 mm

2.2. LED Indicators

Symbol Functions

---------------------------------------------------------------------------------------------------

Power/Status Red for power on

Wireless Green

Ethernet Green

2.3. Interface

RJ-45 10-100 Base-T

Power Jack 2.5 mm

3. PRODUCT HARDWARE SPECIFICATIONS

3.1. RF Specification

3.1.1 General

Emission Type Direct Sequence Spread Spectrum (DSSS)

RF Frequency 2400MHz – 2497 MHz – Japan Band

2400MHz – 2472MHz – North America

2400MHz – 2483.5MHz – Europe

2446.5MHz – 2483.5MHz – France

Operating Channel 11 Channels (US, Canada)

13 Channels (Europe)

14 Channels (Japan)

Radio Chipset: RFMD

Media Access Protocol CSMA/CA (Collision Avoidance) with ACK

3.1.2 Transmitter

RF Output Power 16 ~ 18 dBm (40~63 mW)

Frequency Stability Within + 25 ppm

Data modulation type BPSK (1Mbps) / QPSK (2Mpbs) / CCK (5.5/11Mbps) / PBCC

(5.5/11/22 Mbps)

3.1.3 Receiver

Sensitivity 22MHz PBCC - 80 dBm (Typically @25℃+5℃)

11MHz PBCC - 85 dBm (Typically @25℃+5℃)

11MHz CCK -82dBm(Typically@25℃+5℃)

3.1.4 Antenna Type

Antenna Type Dual Dipole Antenna with Diversity

Antenna Gain 2 dBi (Typically).

3.1.5. Power Consumption

Operation max. 1.2 A

Standby 600mA + 50mA

3.2. Hardware Specification

3.2.1. CPU

Processor SAMSUNG ARM7 CPU

3.2.2. Memory

SDRAM 8 MBytes

Flash 1 MBytes

3.2.2 Power Adapter

Power Voltage DC 5 Volt + 5%, AC Adapter AC 100V-240V

4. PRODUCT SOFTWARE SPECIFICATION

4.1. General Function

a) Standard : IEEE 802.11b/IEEE 802.3

b) RTS/CTS Handshake

c) Duplicate detection and recovery

d) Wired Equivalent Privacy Algorithm (WEP) 64/128/256 Bits

e) Distributed Coordination Function: CSMA/CA, Back of Procedure, ACK Procedure, Retransmission

of unacknowledged frames

f) Authentication Algorithm

g) Fragment / De-fragment

h) Preamble Long / Short

i) Roaming Function

j) Power Saving Management

k) Beacon Generation

l) Access Control

m) HTTPD/DHCP Client

n) Filtering function

o) Bridge Mode for Building to Building Transmission

p) AP Client Mode

q) DHCP Server (Option)

r) DHCP Client

s) Finger print security feature (Option)

4.2. Configuration Function

4.2.1. Interface

a) Web Configuration

b) Windows Configuration Utility

5. REGULATION COMPLIANCE

Compliant with

FCC Part 15 Class B, Sec. 15.247 and 15.109

ETS 300 328, ETS 300 826, EN60950 and CE-Mark

Telec (Japan), VCCI (Option)

WiFiCompliant

6. ENVIRONMENTAL REQUIREMENT

6.1. Drop and Vibration

6.1.1. Anti-Static Voltage

Static voltage tests by 4kV in body should not cause system fail.

6.1.2. Vibration Test

The vibration test is under the Frequency and amplitude 10~25 1mm in vertical and horizontal

direction by 30 minutes that should not cause any damage on product.

6.1.3. Package Drop Test

Dropping the package from the height of 50cm for each of the six(6) faces onto the hard-wood

floor will not cause any product damage.

6.2. Usage Condition

6.2.1. Temperature Range

Operating: -0℃- +55℃(Except RF output power and sensitivity)

Storage: -20℃- +70℃

6.2.2. Temperature Shock

The one cycle of reliability test is keeping -30℃for 2 hours, switching temperature up to +60℃

within one hour, and testing at +60℃by 2 hours, and switching temperature to -30℃within one

hour. Three cycle should be tested and without any product fail.

6.2.3. Humidity

Operating: 0% to 70%

Storage 0% to 95% Non-condensing

7. INSTALLATION AND CONFIGURATION

7.1 Access Point Utility Installation and Configuration

7.1.1 Utility Installation

1. Start the computer

2. Insert the CD into CD-ROM

3. Windows will automatically start Installshield Wizard or run “E:\22M.exe” then following screen

will appear.

4. Select “Access Point”

6. Click “Install “ Button.

7. Click “Next” button.

8. Click “Finish” button to restart computer.

7.1.2 Utility Configuration

Please Click following icon in the screen.

Caution: If you select one or more Access points, then click Apply in following screens. One or

more user names and passwords prompt will appear. Type in “admin” as the user name and

“admin” as the password. Click Ok.

Link inf.

The Link inf. screen will appear. You can view the current status and settings. Then, click AP settings.

AP Settings

The AP setting screen will now appear. Enter a unique name access point for the Access Point and your wireless

network’s SSID, select the channel at which the network broadband its wireless signal. Then, click Advanced

Settings.

Advanced Setup

On this page, you can set the AP mode plus following settings:

Beacon Interval – By default, it is set to 100mps.

RTS Threshold – By default, it is set to 2432. The value should remain on its default setting 2432 bytes. If you

encounter any date flow, only minor modifications are recommended.

Fragmentation Threshold – By default, it is set to 2346. The value indicates how much of the network

resources devoted to recovering packet errors. The value should remain at its default setting of 2432 bytes. If

you have decreased this value and experience high packet error rates, you can increase it again, but will likely

decrease overall network performance.

DTIM Interval – shows the client how often the beacon contains a delivery traffic indication message. Input

range is from 1 to 65535. By default, it is set to 3.

TX Rates – You may select 1. 1-2mbps. 2. 1-2-5.5-11mbps. 3. 1-2-5.5-11-22mbps.

Preamble Type -- There is the “Long” or “Short” selection to ensure that systems receiving the information

correctly interpret when the data transmission starts. To select “Short” Preamble may be used to minimize

overhead and “Long” to maximize the network data throughput. The default value will be set for “Long”.

Authentication Type – You may select Open System or Shared Key. By default, it is set to Both.

Antenna Selection – Choices are 1.Left Antenna 2. Right Antenna 3. Diversity Antenna. By default, it is set to

Auto Select.

IP Setting

The IP Setting screen will appear. Unless your network has a DHCP server, you will want to turn on the bottom

of DHCP server. Enter an IP address and IP Mask appropriate to your network. Then, Click WEP Settings .

WEP Settings

You will set the Wired Equivalent Privacy (WEP) encryption for your wired network. Select a WEP

configuration method and a passphrase. Then, click Apply to finish WEP settings.

Table des matières

Autres manuels Intellinet Point d'accès sans fil

Intellinet

Intellinet 525404 Manuel utilisateur

Intellinet

Intellinet 500500 Manuel utilisateur

Intellinet

Intellinet 525794 Manuel utilisateur

Intellinet

Intellinet 503082 Manuel utilisateur

Intellinet

Intellinet 525251 Manuel utilisateur

Intellinet

Intellinet 522755 Manuel utilisateur

Intellinet

Intellinet 524704 Manuel utilisateur

Intellinet

Intellinet 525688 Manuel utilisateur

Intellinet

Intellinet 524711 Manuel utilisateur

Intellinet

Intellinet 503082 Manuel utilisateur

Intellinet

Intellinet GuestGate 523240 Manuel utilisateur

Intellinet

Intellinet 524728 Manuel utilisateur

Intellinet

Intellinet 525824 Manuel utilisateur

Intellinet

Intellinet 525800 Manuel utilisateur

Intellinet

Intellinet 522601 Manuel utilisateur

Intellinet

Intellinet GUESTGATE MK II Manuel utilisateur

Intellinet

Intellinet 525688 Manuel utilisateur

Intellinet

Intellinet 525824 Manuel utilisateur

Intellinet

Intellinet 522755 Manuel utilisateur

Intellinet

Intellinet 524735 Manuel utilisateur

Intellinet

Intellinet 524711 Manuel utilisateur

Intellinet

Intellinet 524704 Manuel utilisateur

Intellinet

Intellinet 525831 Manuel utilisateur

Intellinet

Intellinet 525824 Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur