Intelligent Home Cronus Manuel utilisateur
Cronus Video Door System
2-wire Series
-1-
www.intelligenthomeonline.com
Installation and User Manual
Digital Touch Screen 7 inch Monitor
1
2
3
4
PRECAUTIONS
• Read this manual through before using the product
• Slots and openings in the back of the monitor, are provided for ventilation and to ensure
reliable operation of the video monitor or equipment and to protect it from overheating.
These openings must not be blocked or covered. The monitor should never be placed near
or over a radiator or heat register and should not be placed in a built-in installation such as a
bookcase unless proper ventilation is provided
• All parts should be protected from violent vibration. Prevent impacts, knocking and dropping
• Clean the LCD monitor with Plastic Protection cleaner only
• Imagedistortionmayoccurifthevideodoorphoneismountedtooclosetomagneticelde. g.
Microwaves, TV, computer etc.
• Please keep away the video door monitor from wet, high temperature, dust, and caustic and
oxidation gas in order to avoid any unpredictable damage
• Do NOT open the device in any condition, call the administrator for help if there is any
problem or malfunction happens
CONTENTS
Monitor Parts and Functions................................................................................................ 1-2
Mounting.................................................................................................................................. 3
Screen ..................................................................................................................................... 4
Answering a call ...................................................................................................................... 5
Adjusting screen&volume........................................................................................................ 5
Door Release. ....................................................................................................................... 7
Intercom Function.................................................................................................................. 7
Manual Monitoring. ................................................................................................................ 8
Operating Staircase Light...................................................................................................... 9
Call Divert.............................................................................................................................. 9
Monitor settings ..................................................................................................................... 10
Ring tone settings .................................................................................................................. 11
Language . ............................................................................................................................. 11
Restoring to default settings.................................................................................................. 12
Entering Installer setup. ........................................................................................................ 12
Screen calibration.................................................................................................................. 16
.......................................................................................................................... 16
-1-
Monitor Parts and Functions
1
7
9
2
3
4
5
6
8
10
NO. Item Description
1 Digital LCD touch screen • Display visitors' image
2 Power indicator ON when monitor powered
3 Message indicator ON when monitor has missed call
4 Unlock button Press to Unlock door or gate
5 Talk/Mon button • Press to communicate hands free with visitor
• Press to view outside in standby mode
6 MENU button Press to open Mainmenu
7 Microphone Transmitsthe audio from door station
8 Mounting hook Use to hang the monitor
9 Speaker Visitors voice coming from speakers
10 Connection port Bus connection terminal
1
2
3
4
SW+
SW-
RING
GND
NC
1 2 3 4 5 6
ON
DIPS
L1
L2
-2-
Monitor Terminals
SW+
SW-
RING
GND
NC
1 2 3 4 5 6
ON
DIPS
L1
L2
SW+
SW-
RING
GND
NC
1 2 3 4 5 6
ON
DIPS
L1
L2
L1,L2: Bus line terminal
SW+,SW-: ExternalCallbutton
connection port
Ring,GND: External Ringer
connection port
NC: Not in use
DIP switches:
• DIP1~DIP5: User Code setting
• DIP6: End of line setting. Set ON
if the monitor is at the end of the
line or if connected with DBC4
Additional Call Button
Additional call button can be connected to a monitor via terminals SW+ White and SW- Green
wires
Please note: There will be no video on the monitor when somebody rings this call button
Additional External Ringer
Additional external ringer can be connected to a monitors via terminals RNG - Red wire to a
Positive and GND - Black wire to a Negative. One Ringer per monitor. Locate a ringer in a
position where you are unlikely to hear the ringing of the monitors; like a garage, shed, or
carport
1. Use the screws to fix the mounting bracket on the wall
2. Hang the Monitor on themounting bracket firmly
Monitor Mounting
Mounting screws
Monitor
Mounting bracket
2 wire cable
145~160 cm
-3-
LOGO
Touch to view info
about software version
and User Code
Screen
The Main menu is your starting point for using all the applications on your monitor
Touch screen anywhere and Main menu will appear as following:
CLOSE
Touch to switch off the screen
SETTINGS
Touch to enter
setup page
DIVERT
Touch to setup calldivert
function (if Telephone/GSM
Interfaces are connected)
Displays which door station
is calling
Displays talking time
LIGHT
Touch to operate the
staircase light (with
add. RLC Interface)
INNER CALL
Touch to start Intercom to all
rooms
MONITOR
Touch to view
outdoor
NAMELIST
Touch to start Intercom to
a specific room
CALL GUARD UNIT
Touch to call Guard Unit
Monitor
Main Menu- Home Page
Icons Visible During Talking
00:10 DS-1
-4-
Answering a Door Call
1
2
3
4
Here you can adjust your monitor properties such as Contrast, Brightness and Colour.
Following adjustments can be performed in ‘Manual Monitoring’ mode with video from Door
Station on a screen
Adjusting Colour,Brightness and Talk Volume
00:10 DS-1 00:10 DS-1
Normal
00:10 DS-1
BASIC OPERATIONS
• When Door Station is rung, the monitor comes On with video
• To start conversation touch TALK/MON
TALK/MON
icon on the button or Talk icon on the screen
•To end conversation touch icon on the button once again or touch icon
on the screen. Monitor will shut down automatically after 40 seconds
-5-
Here you can choose screen ratio 4:3 or 16:9
00:10 DS-1 00:10 DS-1
Normal
00:10 DS-1
5
5
5
5
Here you can adjust Speaker volume. The range are 0 (Mute) ~ 9
Touch - or + to set desired levels
4 scene modes are available to select: Normal, Bright, Soft and User
Screen Contrast. The range is 0~9. Touch -or +to set desired levels
Screen Brightness. The range is 0~9. Touch -or +to set desired levels
Screen Colour. The range is 0~9. Touch -or +to set desired levels
-6-
Autres manuels pour Cronus
1
Table des matières
Manuels Écran tactile populaires d'autres marques
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manuel utilisateur
YASKAWA
YASKAWA TP 610C Manuel utilisateur
B&R
B&R Power Panel C Series Manuel utilisateur
Beijer Electronics
Beijer Electronics X2 control Manuel utilisateur
AXIOMTEK
AXIOMTEK GOT321W-521 Manuel utilisateur
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manuel utilisateur
