SAFETY AND NOTE
Users must take care that motion control equipment is capable of producing high forces and rapid movement
so they must be used with attention, especially during the application program’s development.
This motion control equipments are sold as end-users products to be installed only by skilled personnel, in
accordance with all local safety laws and regulations. The device has to be enclosed such that any part is not
be accessible while the system is powered on.
We strongly recommend to follow these recommendations in order to avoid wrong uses of the equipment
that may make useless all the protections provided by the device.
Please read these notes carefully before powering up the drive:
It is very important to meet all applicable safety requirements during installation and operating of any motion
control equipment. Any installer has to assume the responsibility to ensure that it complies all the relevant
safety standards. Any installation, not meeting the safety requirements, may damage the equipment or injury
the user.
This motion control equipment should be handled, installed, setted-up and maintened only by competent
personnel expert and trained in the installation of motion control electronic equipment. Such technicians
should be aware of potential electrical and mechanical hazards. Shall never beliable or have any responsibility
if the products have been improperly stored, installed, used or maintened, or if the costumer has permitted
any unauthorized modifications, adjustments, and/or repairs to the products.
Simbols security standard:
Danger sign
:
All the circuits in the Drive are potential sources of severe electrical
shock, so follow these rules to avoide possible personal injury.
Power off the drive and wait until all the leds are turned off before
touching, removing, connecting or any other critical action.
Never disconnect any connectors before powering down the drive.
Please read this manual before using the drive!!!!
This manual replaces and cancels any previous edition
and revision
We reserve the right to make changes without notice.
